From: Preetham Ramchandra <pchandru@xxxxxxxxxx> This adds bindings documentation for the AHCI controller on Tegra210. Signed-off-by: Preetham Chandru R <pchandru@xxxxxxxxxx> --- v8: * Add Tegra132: "nvidia,tegra132-ahci", "nvidia,tegra124-ahci". * Changed AUX registers to optional. * corrected commit message line length. * Move phy-name for Tegra210 to optional. v7: * For Aux register set drop the Tegra210 since this register set also works on Tegra124 * rephrase the sentence for cml1 clock * change the commit subject to include ahci-tegra * drop pll_e since CCF handles it automatically as CML1 is a child clock of it. v4: * changed the commit message * changed 'sata-cold' reset to mandatory for t210 and t124 * Removed the regulators for T210 since these regulators will be enabled in phy driver. v3: * Add AUX register. v2: * change cml1, pll_e and phy regulators as optional for T210. --- .../bindings/ata/nvidia,tegra124-ahci.txt | 36 ++++++++++++++-------- 1 file changed, 24 insertions(+), 12 deletions(-) diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt index 66c83c3e8915..12ab2f723eb0 100644 --- a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt +++ b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt @@ -1,9 +1,10 @@ -Tegra124 SoC SATA AHCI controller +Tegra SoC SATA AHCI controller Required properties : -- compatible : For Tegra124, must contain "nvidia,tegra124-ahci". Otherwise, - must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip> - is tegra132. +- compatible : Must be one of: + - Tegra124 : "nvidia,tegra124-ahci" + - Tegra132 : "nvidia,tegra132-ahci", "nvidia,tegra124-ahci" + - Tegra210 : "nvidia,tegra210-ahci" - reg : Should contain 2 entries: - AHCI register set (SATA BAR5) - SATA register set @@ -13,8 +14,6 @@ Required properties : - clock-names : Must include the following entries: - sata - sata-oob - - cml1 - - pll_e - resets : Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. - reset-names : Must include the following entries: @@ -24,9 +23,22 @@ Required properties : - phys : Must contain an entry for each entry in phy-names. See ../phy/phy-bindings.txt for details. - phy-names : Must include the following entries: - - sata-phy : XUSB PADCTL SATA PHY -- hvdd-supply : Defines the SATA HVDD regulator -- vddio-supply : Defines the SATA VDDIO regulator -- avdd-supply : Defines the SATA AVDD regulator -- target-5v-supply : Defines the SATA 5V power regulator -- target-12v-supply : Defines the SATA 12V power regulator + - For Tegra124 and Tegra132: + - sata-phy : XUSB PADCTL SATA PHY +- For Tegra124 and Tegra132: + - hvdd-supply : Defines the SATA HVDD regulator + - vddio-supply : Defines the SATA VDDIO regulator + - avdd-supply : Defines the SATA AVDD regulator + - target-5v-supply : Defines the SATA 5V power regulator + - target-12v-supply : Defines the SATA 12V power regulator + +Optional properties: +- reg : + - AUX register set +- clock-names : + - cml1 : + cml1 clock should be defined here if the PHY driver + doesn't manage them. If it does, they should not be. +- phy-names : + - For T210: + - sata-phy -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html