The ODD can be enabled for ZPODD if the following three conditions are satisfied: 1 The ODD supports device attention; 2 The platform can runtime power off the ODD through ACPI; 3 The ODD is either slot type or drawer type. For such ODDs, zpodd_init is called and a new structure is allocated for it to store ZPODD related stuffs. And the zpodd_dev_enabled function is used to test if ZPODD is currently enabled for this ODD. A new config CONFIG_SATA_ZPODD is added to selectively build ZPODD code. Signed-off-by: Aaron Lu <aaron.lu@xxxxxxxxx> Acked-by: Tejun Heo <tj@xxxxxxxxxx> --- drivers/ata/Kconfig | 13 ++++++ drivers/ata/Makefile | 1 + drivers/ata/libata-core.c | 4 +- drivers/ata/libata-scsi.c | 2 + drivers/ata/libata-zpodd.c | 100 +++++++++++++++++++++++++++++++++++++++++++++ drivers/ata/libata.h | 14 +++++++ include/linux/libata.h | 3 ++ include/uapi/linux/cdrom.h | 34 +++++++++++++++ 8 files changed, 170 insertions(+), 1 deletion(-) create mode 100644 drivers/ata/libata-zpodd.c diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index e08d322..996d16c 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -58,6 +58,19 @@ config ATA_ACPI You can disable this at kernel boot time by using the option libata.noacpi=1 +config SATA_ZPODD + bool "SATA Zero Power ODD Support" + depends on ATA_ACPI + default n + help + This option adds support for SATA ZPODD. It requires both + ODD and the platform support, and if enabled, will automatically + power on/off the ODD when certain condition is satisfied. This + does not impact user's experience of the ODD, only power is saved + when ODD is not in use(i.e. no disc inside). + + If unsure, say N. + config SATA_PMP bool "SATA Port Multiplier support" default y diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 9329daf..85e3de4 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -107,3 +107,4 @@ libata-y := libata-core.o libata-scsi.o libata-eh.o libata-transport.o libata-$(CONFIG_ATA_SFF) += libata-sff.o libata-$(CONFIG_SATA_PMP) += libata-pmp.o libata-$(CONFIG_ATA_ACPI) += libata-acpi.o +libata-$(CONFIG_SATA_ZPODD) += libata-zpodd.o diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 275941b..c7ecd84 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2401,8 +2401,10 @@ int ata_dev_configure(struct ata_device *dev) dma_dir_string = ", DMADIR"; } - if (ata_id_has_da(dev->id)) + if (ata_id_has_da(dev->id)) { dev->flags |= ATA_DFLAG_DA; + zpodd_init(dev); + } /* print device info to dmesg */ if (ata_msg_drv(ap) && print_info) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 7c337e7..1ff0185 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3755,6 +3755,8 @@ static void ata_scsi_remove_dev(struct ata_device *dev) mutex_lock(&ap->scsi_host->scan_mutex); spin_lock_irqsave(ap->lock, flags); + if (zpodd_dev_enabled(dev)) + zpodd_exit(dev); ata_acpi_unbind(dev); /* clearing dev->sdev is protected by host lock */ diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c new file mode 100644 index 0000000..27eed2f --- /dev/null +++ b/drivers/ata/libata-zpodd.c @@ -0,0 +1,100 @@ +#include <linux/libata.h> +#include <linux/cdrom.h> + +#include "libata.h" + +enum odd_mech_type { + ODD_MECH_TYPE_SLOT, + ODD_MECH_TYPE_DRAWER, + ODD_MECH_TYPE_UNSUPPORTED, +}; + +struct zpodd { + enum odd_mech_type mech_type; /* init during probe, RO afterwards */ + struct ata_device *dev; +}; + +/* Per the spec, only slot type and drawer type ODD can be supported */ +static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev) +{ + char buf[16]; + unsigned int ret; + struct rm_feature_desc *desc = (void *)(buf + 8); + struct ata_taskfile tf = {}; + + char cdb[] = { GPCMD_GET_CONFIGURATION, + 2, /* only 1 feature descriptor requested */ + 0, 3, /* 3, removable medium feature */ + 0, 0, 0,/* reserved */ + 0, sizeof(buf), + 0, 0, 0, + }; + + tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.command = ATA_CMD_PACKET; + tf.protocol = ATAPI_PROT_PIO; + tf.lbam = sizeof(buf); + + ret = ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE, + buf, sizeof(buf), 0); + if (ret) + return ODD_MECH_TYPE_UNSUPPORTED; + + if (be16_to_cpu(desc->feature_code) != 3) + return ODD_MECH_TYPE_UNSUPPORTED; + + if (desc->mech_type == 0 && desc->load == 0 && desc->eject == 1) + return ODD_MECH_TYPE_SLOT; + else if (desc->mech_type == 1 && desc->load == 0 && desc->eject == 1) + return ODD_MECH_TYPE_DRAWER; + else + return ODD_MECH_TYPE_UNSUPPORTED; +} + +static bool odd_can_poweroff(struct ata_device *ata_dev) +{ + acpi_handle handle; + acpi_status status; + struct acpi_device *acpi_dev; + + handle = ata_dev_acpi_handle(ata_dev); + if (!handle) + return false; + + status = acpi_bus_get_device(handle, &acpi_dev); + if (ACPI_FAILURE(status)) + return false; + + return acpi_device_can_poweroff(acpi_dev); +} + +void zpodd_init(struct ata_device *dev) +{ + enum odd_mech_type mech_type; + struct zpodd *zpodd; + + if (dev->zpodd) + return; + + if (!odd_can_poweroff(dev)) + return; + + mech_type = zpodd_get_mech_type(dev); + if (mech_type == ODD_MECH_TYPE_UNSUPPORTED) + return; + + zpodd = kzalloc(sizeof(struct zpodd), GFP_KERNEL); + if (!zpodd) + return; + + zpodd->mech_type = mech_type; + + zpodd->dev = dev; + dev->zpodd = zpodd; +} + +void zpodd_exit(struct ata_device *dev) +{ + kfree(dev->zpodd); + dev->zpodd = NULL; +} diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 7148a58..a21740b 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -230,4 +230,18 @@ static inline void ata_sff_exit(void) { } #endif /* CONFIG_ATA_SFF */ +/* libata-zpodd.c */ +#ifdef CONFIG_SATA_ZPODD +void zpodd_init(struct ata_device *dev); +void zpodd_exit(struct ata_device *dev); +static inline bool zpodd_dev_enabled(struct ata_device *dev) +{ + return dev->zpodd != NULL; +} +#else /* CONFIG_SATA_ZPODD */ +static inline void zpodd_init(struct ata_device *dev) {} +static inline void zpodd_exit(struct ata_device *dev) {} +static inline bool zpodd_dev_enabled(struct ata_device *dev) { return false; } +#endif /* CONFIG_SATA_ZPODD */ + #endif /* __LIBATA_H__ */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 7ae207e..65ff67e 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -621,6 +621,9 @@ struct ata_device { union acpi_object *gtf_cache; unsigned int gtf_filter; #endif +#ifdef CONFIG_SATA_ZPODD + void *zpodd; +#endif struct device tdev; /* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */ u64 n_sectors; /* size of device, if ATA */ diff --git a/include/uapi/linux/cdrom.h b/include/uapi/linux/cdrom.h index 898b866..bd17ad5 100644 --- a/include/uapi/linux/cdrom.h +++ b/include/uapi/linux/cdrom.h @@ -908,5 +908,39 @@ struct mode_page_header { __be16 desc_length; }; +/* removable medium feature descriptor */ +struct rm_feature_desc { + __be16 feature_code; +#if defined(__BIG_ENDIAN_BITFIELD) + __u8 reserved1:2; + __u8 feature_version:4; + __u8 persistent:1; + __u8 curr:1; +#elif defined(__LITTLE_ENDIAN_BITFIELD) + __u8 curr:1; + __u8 persistent:1; + __u8 feature_version:4; + __u8 reserved1:2; +#endif + __u8 add_len; +#if defined(__BIG_ENDIAN_BITFIELD) + __u8 mech_type:3; + __u8 load:1; + __u8 eject:1; + __u8 pvnt_jmpr:1; + __u8 dbml:1; + __u8 lock:1; +#elif defined(__LITTLE_ENDIAN_BITFIELD) + __u8 lock:1; + __u8 dbml:1; + __u8 pvnt_jmpr:1; + __u8 eject:1; + __u8 load:1; + __u8 mech_type:3; +#endif + __u8 reserved2; + __u8 reserved3; + __u8 reserved4; +}; #endif /* _UAPI_LINUX_CDROM_H */ -- 1.7.11.7 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html