Re: [PATCH v2 2/6] ARM: EXYNOS5: DT Support for SATA and SATA PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Missed to include Ben, for I2C patch, including him and copying others.

Thanks,
Vasanth.

On Tue, Oct 30, 2012 at 9:31 PM, Vasanth Ananthan
<vasanthananthan@xxxxxxxxx> wrote:
> This patch adds Device Nodes for SATA and SATA PHY device.
>
> Signed-off-by: Vasanth Ananthan <vasanth.a@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/ata/exynos-sata-phy.txt    |   14 ++++++++++++++
>  .../devicetree/bindings/ata/exynos-sata.txt        |   17 +++++++++++++++++
>  arch/arm/boot/dts/exynos5250-smdk5250.dts          |   15 +++++++++++++++
>  arch/arm/boot/dts/exynos5250.dtsi                  |   18 ++++++++++++++++++
>  arch/arm/mach-exynos/include/mach/map.h            |    3 +++
>  arch/arm/mach-exynos/mach-exynos5-dt.c             |    6 ++++++
>  6 files changed, 73 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
>  create mode 100644 Documentation/devicetree/bindings/ata/exynos-sata.txt
>
> diff --git a/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt b/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
> new file mode 100644
> index 0000000..37824fa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
> @@ -0,0 +1,14 @@
> +* Samsung SATA PHY Controller
> +
> +SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
> +Each SATA PHY controller should have its own node.
> +
> +Required properties:
> +- compatible        : compatible list, contains "samsung,exynos5-sata-phy"
> +- reg               : <registers mapping>
> +
> +Example:
> +        sata@ffe07000 {
> +                compatible = "samsung,exynos5-sata-phy";
> +                reg = <0xffe07000 0x1000>;
> +        };
> diff --git a/Documentation/devicetree/bindings/ata/exynos-sata.txt b/Documentation/devicetree/bindings/ata/exynos-sata.txt
> new file mode 100644
> index 0000000..0849f10
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/exynos-sata.txt
> @@ -0,0 +1,17 @@
> +* Samsung AHCI SATA Controller
> +
> +SATA nodes are defined to describe on-chip Serial ATA controllers.
> +Each SATA controller should have its own node.
> +
> +Required properties:
> +- compatible        : compatible list, contains "samsung,exynos5-sata"
> +- interrupts        : <interrupt mapping for SATA IRQ>
> +- reg               : <registers mapping>
> +- samsung,sata-freq : <frequency in MHz>
> +
> +Example:
> +        sata@ffe08000 {
> +                compatible = "samsung,exynos5-sata";
> +                reg = <0xffe08000 0x1000>;
> +                interrupts = <115>;
> +        };
> diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> index a352df4..6910deb 100644
> --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
> +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> @@ -55,6 +55,21 @@
>                 };
>         };
>
> +       i2c@121D0000 {
> +               samsung,i2c-sda-delay = <100>;
> +               samsung,i2c-max-bus-freq = <40000>;
> +               samsung,i2c-slave-addr = <0x38>;
> +
> +               sata-phy {
> +                       compatible = "samsung,sata-phy";
> +                       reg = <0x38>;
> +               };
> +       };
> +
> +       sata@122F0000 {
> +               samsung,sata-freq = <66>;
> +       };
> +
>         i2c@12C80000 {
>                 status = "disabled";
>         };
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
> index dddfd6e..e41520f 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -92,6 +92,17 @@
>                 interrupts = <0 54 0>;
>         };
>
> +       sata@122F0000 {
> +               compatible = "samsung,exynos5-sata-ahci";
> +               reg = <0x122F0000 0x1ff>;
> +               interrupts = <0 115 0>;
> +       };
> +
> +       sata-phy@12170000 {
> +               compatible = "samsung,exynos5-sata-phy";
> +               reg = <0x12170000 0x1ff>;
> +       };
> +
>         i2c@12C60000 {
>                 compatible = "samsung,s3c2440-i2c";
>                 reg = <0x12C60000 0x100>;
> @@ -156,6 +167,13 @@
>                 #size-cells = <0>;
>         };
>
> +       i2c@121D0000 {
> +                compatible = "samsung,exynos5-sata-phy-i2c";
> +                reg = <0x121D0000 0x100>;
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +       };
> +
>         spi_0: spi@12d20000 {
>                 compatible = "samsung,exynos4210-spi";
>                 reg = <0x12d20000 0x100>;
> diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
> index 8480849..ffeb761 100644
> --- a/arch/arm/mach-exynos/include/mach/map.h
> +++ b/arch/arm/mach-exynos/include/mach/map.h
> @@ -188,6 +188,9 @@
>  #define EXYNOS4_PA_SATA                        0x12560000
>  #define EXYNOS4_PA_SATAPHY             0x125D0000
>  #define EXYNOS4_PA_SATAPHY_CTRL                0x126B0000
> +#define EXYNOS5_PA_SATA_PHY_CTRL       0x12170000
> +#define EXYNOS5_PA_SATA_PHY_I2C                0x121D0000
> +#define EXYNOS5_PA_SATA_BASE           0x122F0000
>
>  #define EXYNOS4_PA_SROMC               0x12570000
>  #define EXYNOS5_PA_SROMC               0x12250000
> diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
> index db1cd8e..7dbd4cc 100644
> --- a/arch/arm/mach-exynos/mach-exynos5-dt.c
> +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
> @@ -61,6 +61,12 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
>                                 "exynos4210-spi.1", NULL),
>         OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2,
>                                 "exynos4210-spi.2", NULL),
> +       OF_DEV_AUXDATA("samsung,exynos5-sata-ahci", EXYNOS5_PA_SATA_BASE,
> +                               "exynos5-sata", NULL),
> +       OF_DEV_AUXDATA("samsung,exynos5-sata-phy", EXYNOS5_PA_SATA_PHY_CTRL,
> +                               "exynos5-sata-phy", NULL),
> +       OF_DEV_AUXDATA("samsung,exynos5-sata-phy-i2c", EXYNOS5_PA_SATA_PHY_I2C,
> +                               "exynos5-sata-phy-i2c", NULL),
>         OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
>         OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
>         OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
> --
> 1.7.4.1
>



-- 
Regards,

Vasanth K A
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux