Also I want to note that some times notebook was suspended.
But this errors don't appears every time before suspend or just after resume.
On Wed, Nov 7, 2012 at 7:41 AM, Azat Khuzhin <dohardgopro@xxxxxxxxx> wrote:
> Anybody?
>
> On Mon, Nov 5, 2012 at 7:28 PM, Azat Khuzhin <dohardgopro@xxxxxxxxx> wrote:
>> After installing linux on macbook 9.2 (mid 2012), I have next errors
>> in dmesg log:
>>
>> [ 389.623828] EXT4-fs (sda4): re-mounted. Opts:
>> errors=remount-ro,data=ordered,commit=600
>> [ 410.038465] NMI watchdog: enabled on all CPUs, permanently consumes
>> one hw-PMU counter.
>> [ 410.075042] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>> [ 410.483526] EXT4-fs (sda4): re-mounted. Opts:
>> errors=remount-ro,data=ordered,commit=0
>> [ 1401.834509] EXT4-fs (sda4): re-mounted. Opts:
>> errors=remount-ro,data=ordered,commit=1800
>> [ 1406.467268] NMI watchdog: enabled on all CPUs, permanently consumes
>> one hw-PMU counter.
>> [ 1406.506769] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>> [ 1406.590122] EXT4-fs (sda4): re-mounted. Opts:
>> errors=remount-ro,data=ordered,commit=0
>> [ 1407.492260] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000
>> action 0xe frozen
>> [ 1407.494441] ata2.00: irq_stat 0x00400000, PHY RDY changed
>> [ 1407.495238] ata2: SError: { PHYRdyChg CommWake }
>> [ 1407.496035] sr 1:0:0:0: CDB:
>> [ 1407.497333] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
>> [ 1407.498285] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0
>> pio 16392 in
>> [ 1407.498285] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask
>> 0x10 (ATA bus error)
>> [ 1407.501987] ata2.00: status: { DRDY }
>> [ 1407.502882] ata2: hard resetting link
>> [ 1408.230302] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> [ 1408.233279] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>> filtered out
>> [ 1408.237467] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>> filtered out
>> [ 1408.239084] ata2.00: configured for UDMA/100
>> [ 1408.262238] ata2: EH complete
>> [ 3565.785609] EXT4-fs (sda4): re-mounted. Opts:
>> errors=remount-ro,data=ordered,commit=1800
>> [ 3576.921499] NMI watchdog: enabled on all CPUs, permanently consumes
>> one hw-PMU counter.
>> [ 3576.958624] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>> [ 3577.114612] EXT4-fs (sda4): re-mounted. Opts:
>> errors=remount-ro,data=ordered,commit=0
>> [ 3577.923688] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000
>> action 0xe frozen
>> [ 3577.925852] ata2.00: irq_stat 0x00400000, PHY RDY changed
>> [ 3577.926746] ata2: SError: { PHYRdyChg CommWake }
>> [ 3577.927544] sr 1:0:0:0: CDB:
>> [ 3577.928345] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
>> [ 3577.929642] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0
>> pio 16392 in
>> [ 3577.929642] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask
>> 0x10 (ATA bus error)
>> [ 3577.932954] ata2.00: status: { DRDY }
>> [ 3577.934264] ata2: hard resetting link
>> [ 3578.662228] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> [ 3578.665211] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>> filtered out
>> [ 3578.669355] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>> filtered out
>> [ 3578.670969] ata2.00: configured for UDMA/100
>> [ 3578.694145] ata2: EH complete
>>
>> Is it linux driver, or maybe
>>
>> $ lspci # sata information only
>> 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family
>> 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
>> Subsystem: Intel Corporation Device 7270
>> Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
>> I/O ports at 2098 [size=8]
>> I/O ports at 20bc [size=4]
>> I/O ports at 2090 [size=8]
>> I/O ports at 20b8 [size=4]
>> I/O ports at 2060 [size=32]
>> Memory at a0816000 (32-bit, non-prefetchable) [size=2K]
>> Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>> Capabilities: [70] Power Management version 3
>> Capabilities: [a8] SATA HBA v1.0
>> Capabilities: [b0] PCI Advanced Features
>> Kernel driver in use: ahci
>>
>> $ uname -a
>> Linux macbook-pro 3.6.5macbook-pro-custom-v0.1 #4 SMP Sun Nov 4
>> 12:39:03 UTC 2012 x86_64 GNU/Linux
>> $ cat /etc/debian_version
>> wheezy/sid
>>
>> In OSX there is no errors with hard drive.
>>
>> What else can I do investigate this situation next?
>>
>> --
>> Azat Khuzhin
>
>
>
> --
> Azat Khuzhin
--
Azat Khuzhin
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
