[PATCH 02/16] ata: Convert dev_printk(KERN_<LEVEL> to dev_<level>(

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



dev_<level> calls take less code than dev_printk(KERN_<LEVEL>
and reducing object size is good.
Coalesce formats for easier grep.

Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
 drivers/ata/pata_cmd64x.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 7ba0141..2949cfc 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -474,14 +474,14 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* check for enabled ports */
 	pci_read_config_byte(pdev, CNTRL, &reg);
 	if (!port_ok)
-		dev_printk(KERN_NOTICE, &pdev->dev, "Mobility Bridge detected, ignoring CNTRL port enable/disable\n");
+		dev_notice(&pdev->dev, "Mobility Bridge detected, ignoring CNTRL port enable/disable\n");
 	if (port_ok && cntrl_ch0_ok && !(reg & CNTRL_CH0)) {
-		dev_printk(KERN_NOTICE, &pdev->dev, "Primary port is disabled\n");
+		dev_notice(&pdev->dev, "Primary port is disabled\n");
 		ppi[0] = &ata_dummy_port_info;
 
 	}
 	if (port_ok && !(reg & CNTRL_CH1)) {
-		dev_printk(KERN_NOTICE, &pdev->dev, "Secondary port is disabled\n");
+		dev_notice(&pdev->dev, "Secondary port is disabled\n");
 		ppi[1] = &ata_dummy_port_info;
 	}
 
-- 
1.7.8.112.g3fd21

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux