Package: src:linux from Debian Wheezy/testing Version: 3.2.23-1 Dear Linux folks, please keep my address in CC list since I am not subscribed. With the CD burner/drive CD-RW CDR-5S40 and the board ASUS M2A-VM I experience the following problem. After suspend to RAM, opening the burner (ejecting the bay) during resume the bay was closed automatically, but the burner was disabled then. $ dmesg […] [ 9025.492101] ata1.01: NODEV after polling detection [ 9025.492114] ata1.01: revalidation failed (errno=-2) [ 9030.664092] ata1.01: NODEV after polling detection [ 9030.664104] ata1.01: revalidation failed (errno=-2) [ 9030.664116] ata1.01: disabled [ 9030.664178] ata1: soft resetting link [ 9030.831927] ata1: EH complete Is that expected? Now I am not able to use the burner and have to do a restart. Putting a medium in the burner, the LED lights up, but it does not start spinning. $ eject /dev/sr0 eject: Kann nicht auswerfen! Letzter Fehler: Unpassender IOCTL (I/O-Control) für das Gerät But looking at the Linux messages, I think that is normal for a disabled device. Another strange thing is, that udisks still seems to know about the burner. $ udisks --show-info /dev/sr0 # after being disabled Showing information for /org/freedesktop/UDisks/devices/sr0 native-path: /sys/devices/pci0000:00/0000:00:14.1/host0/target0:0:1/0:0:1:0/block/sr0 device: 11:0 device-file: /dev/sr0 presentation: /dev/sr0 by-path: /dev/disk/by-path/pci-0000:00:14.1-scsi-0:0:1:0 detected at: So 30 Sep 2012 10:10:20 CEST system internal: 0 removable: 1 has media: 0 detects change: 1 detection by polling: 1 detection inhibitable: 1 detection inhibited: 0 is read only: 0 is mounted: 0 mount paths: mounted by uid: 0 presentation hide: 0 presentation nopolicy: 0 presentation name: presentation icon: automount hint: size: 0 block size: 0 job underway: no usage: type: version: uuid: label: drive: vendor: CD-RW model: CD-RW CDR-5S40 revision: ZSG6 serial: WWN: detachable: 0 can spindown: 0 rotational media: Yes, unknown rate write-cache: unknown ejectable: 1 adapter: /org/freedesktop/UDisks/adapters/0000_3a00_3a14_2e1 ports: /org/freedesktop/UDisks/adapters/0000_3a00_3a14_2e1/host0 similar devices: media: compat: optical_cd optical_cd_r optical_cd_rw optical_mrw optical_mrw_w interface: scsi if speed: (unknown) ATA SMART: not available Thanks, Paul -- Package-specific info: ** Version: Linux version 3.2.0-3-amd64 (Debian 3.2.23-1) (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 02:45:17 UTC 2012 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=UUID=4313c2c9-7301-41e8-aa9b-9e6788a219d3 ro noisapnp quiet rdinitrd=/sbin/bootchartd initcall_debug printk.time=y init=/sbin/bootchartd ** Not tainted ** Kernel log: [ 9020.033109] call host4+ returned 0 after 1 usecs [ 9020.033113] calling host5+ @ 6121 [ 9020.033118] call host5+ returned 0 after 1 usecs [ 9020.033122] calling target0:0:1+ @ 6121 [ 9020.033127] call target0:0:1+ returned 0 after 1 usecs [ 9020.033130] calling 0:0:1:0+ @ 6121 [ 9020.033141] call 0:0:1:0+ returned 0 after 7 usecs [ 9020.033301] calling target2:0:0+ @ 6125 [ 9020.033306] call target2:0:0+ returned 0 after 1 usecs [ 9020.033326] calling 2:0:0:0+ @ 6125 [ 9020.033332] sd 2:0:0:0: [sda] Starting disk [ 9020.048151] r8169 0000:02:00.0: eth0: link down [ 9020.052030] call 0000:00:13.0+ returned 0 after 21088 usecs [ 9020.052040] call 0000:00:13.3+ returned 0 after 20955 usecs [ 9020.052045] call 0000:00:13.1+ returned 0 after 21075 usecs [ 9020.052051] call 0000:00:13.4+ returned 0 after 20936 usecs [ 9020.052056] call 0000:00:13.2+ returned 0 after 21000 usecs [ 9020.052062] calling usb2+ @ 6092 [ 9020.052067] calling usb3+ @ 4858 [ 9020.052075] calling usb5+ @ 6113 [ 9020.052079] calling usb4+ @ 6090 [ 9020.052085] calling usb6+ @ 6117 [ 9020.052109] call 0000:00:13.5+ returned 0 after 20972 usecs [ 9020.052119] calling usb1+ @ 6089 [ 9020.104047] call usb1+ returned 0 after 50708 usecs [ 9020.132032] call usb4+ returned 0 after 78073 usecs [ 9020.132039] call usb6+ returned 0 after 78075 usecs [ 9020.132065] call usb3+ returned 0 after 78117 usecs [ 9020.132086] call usb2+ returned 0 after 78145 usecs [ 9020.132108] call usb5+ returned 0 after 78153 usecs [ 9020.132125] calling 3-1+ @ 6121 [ 9020.133065] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 9020.141378] [drm] PCIE GART of 512M enabled (table at 0x0000000074580000). [ 9020.141390] radeon 0000:01:05.0: WB enabled [ 9020.141406] [drm] radeon: ring at 0x0000000080001000 [ 9020.141424] [drm] ring test succeeded in 1 usecs [ 9020.141437] [drm] ib test succeeded in 0 usecs [ 9020.164145] call 0000:01:05.0+ returned 0 after 130191 usecs [ 9020.304065] ata1.01: NODEV after polling detection [ 9020.304069] ata1.01: revalidation failed (errno=-2) [ 9020.348041] ata5: SATA link down (SStatus 0 SControl 300) [ 9020.348080] ata6: SATA link down (SStatus 0 SControl 300) [ 9020.348113] ata4: SATA link down (SStatus 0 SControl 300) [ 9020.460036] usb 3-1: reset low-speed USB device number 2 using ohci_hcd [ 9020.576018] ata3: softreset failed (device not ready) [ 9020.576022] ata3: applying PMP SRST workaround and retrying [ 9020.748033] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9020.774102] call 3-1+ returned 0 after 626927 usecs [ 9020.970314] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 9021.042954] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 9021.042958] ata3.00: configured for UDMA/133 [ 9021.090848] call 2:0:0:0+ returned 0 after 1032732 usecs [ 9021.090869] calling input0+ @ 5838 [ 9021.090901] call input0+ returned 0 after 27 usecs [ 9021.090913] calling i2c-0+ @ 5838 [ 9021.090918] call i2c-0+ returned 0 after 0 usecs [ 9021.090924] calling input1+ @ 5838 [ 9021.090933] call input1+ returned 0 after 5 usecs [ 9021.090936] calling input2+ @ 5838 [ 9021.090944] call input2+ returned 0 after 5 usecs [ 9021.090948] calling SP5100 TCO timer+ @ 5838 [ 9021.090952] call SP5100 TCO timer+ returned 0 after 1 usecs [ 9021.090957] calling ttm+ @ 5838 [ 9021.090962] call ttm+ returned 0 after 1 usecs [ 9021.090967] calling input3+ @ 5838 [ 9021.090980] call input3+ returned 0 after 9 usecs [ 9021.090992] calling controlD64+ @ 5838 [ 9021.090996] call controlD64+ returned 0 after 0 usecs [ 9021.090999] calling card0+ @ 5838 [ 9021.091004] call card0+ returned 0 after 1 usecs [ 9021.091007] calling i2c-1+ @ 5838 [ 9021.091011] call i2c-1+ returned 0 after 0 usecs [ 9021.091013] calling i2c-2+ @ 5838 [ 9021.091018] call i2c-2+ returned 0 after 1 usecs [ 9021.091021] calling i2c-3+ @ 5838 [ 9021.091025] call i2c-3+ returned 0 after 0 usecs [ 9021.091028] calling i2c-4+ @ 5838 [ 9021.091032] call i2c-4+ returned 0 after 1 usecs [ 9021.091035] calling card0-VGA-1+ @ 5838 [ 9021.091039] call card0-VGA-1+ returned 0 after 1 usecs [ 9021.091042] calling card0-SVIDEO-1+ @ 5838 [ 9021.091046] call card0-SVIDEO-1+ returned 0 after 0 usecs [ 9021.091049] calling card0-HDMI-A-1+ @ 5838 [ 9021.091053] call card0-HDMI-A-1+ returned 0 after 0 usecs [ 9021.091056] calling card0-DVI-D-1+ @ 5838 [ 9021.091060] call card0-DVI-D-1+ returned 0 after 0 usecs [ 9021.091065] calling input4+ @ 5838 [ 9021.091070] call input4+ returned 0 after 1 usecs [ 9021.091100] PM: resume of devices complete after 1060.825 msecs [ 9023.590417] PM: Finishing wakeup. [ 9023.590420] Restarting tasks ... done. [ 9025.492101] ata1.01: NODEV after polling detection [ 9025.492114] ata1.01: revalidation failed (errno=-2) [ 9030.664092] ata1.01: NODEV after polling detection [ 9030.664104] ata1.01: revalidation failed (errno=-2) [ 9030.664116] ata1.01: disabled [ 9030.664178] ata1: soft resetting link [ 9030.831927] ata1: EH complete [ 9034.973553] r8169 0000:02:00.0: eth0: link up [ 9045.648032] eth0: no IPv6 routers present ** Model information sys_vendor: System manufacturer product_name: System Product Name product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: Phoenix Technologies, LTD bios_version: ASUS M2A-VM ACPI BIOS Revision 2302 board_vendor: ASUSTeK Computer INC. board_name: M2A-VM board_version: 1.XX ** Loaded modules: ip6table_filter ip6_tables iptable_filter ip_tables x_tables radeon edac_mce_amd psmouse pcspkr powernow_k8 mperf evdev snd_hda_codec_realtek serio_raw ttm edac_core k8temp drm_kms_helper drm power_supply i2c_algo_bit snd_hda_intel snd_hda_codec snd_hwdep parport_pc parport asus_atk0110 sp5100_tco button snd_pcm processor snd_page_alloc snd_timer i2c_piix4 snd soundcore shpchp i2c_core cn ext2 mbcache sg sr_mod sd_mod crc_t10dif cdrom usbhid ata_generic hid ahci libahci ohci_hcd pata_atiixp libata ehci_hcd fan thermal thermal_sys usbcore r8169 mii scsi_mod usb_common ** PCI devices: not available ** USB devices: not available -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-3-amd64 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-3-amd64 depends on: ii debconf [debconf-2.0] 1.5.46 ii initramfs-tools [linux-initramfs-tool] 0.107 ii kmod 9-2 ii linux-base 3.5 ii module-init-tools 9-2 Versions of packages linux-image-3.2.0-3-amd64 recommends: ii firmware-linux-free 3.1 Versions of packages linux-image-3.2.0-3-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-23 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-3-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.36 ii firmware-linux-nonfree 0.36 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-3-amd64/postinst/depmod-error-initrd-3.2.0-3-amd64: false linux-image-3.2.0-3-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-3-amd64/postinst/missing-firmware-3.2.0-3-amd64: linux-image-3.2.0-3-amd64/prerm/removing-running-kernel-3.2.0-3-amd64: true
Attachment:
signature.asc
Description: This is a digitally signed message part