Hello. On 06-09-2012 8:28, Shaohui Xie wrote:
The freescale V2 SATA controller checks if the received data length matches the programmed length 'ttl', if not, it assumes that this is an error. In ATAPI, the 'ttl' is based on max allocation length and not the actual data transfer length, controller will raise 'DLM' (Data length Mismatch) error bit in Hstatus register. Along with 'DLM', DE (Device error) and FE (fatal Error) bits are also set in Hstatus register, 'E' (Internal Error) bit is set in Serror register and CE (Command Error) and DE (Device error) registers have the corresponding bit set. In this condition, we need to clear errors in following way: in the service routine, based on 'DLM' flag, HCONTROL[27] operation clears Hstatus, CE and DE registers, clear Serror register.
Signed-off-by: Shaohui Xie <Shaohui.Xie@xxxxxxxxxxxxx> Signed-off-by: Anju Bhartiya <Anju.Bhartiya@xxxxxxxxxxxxx> --- changes for V2: 1. remove the using of quirk; 2. wrap errata codes in condition;
drivers/ata/sata_fsl.c | 40 +++++++++++++++++++++++++++++++++++----- 1 files changed, 35 insertions(+), 5 deletions(-)
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index d6577b9..6b7b73e 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c
[...]
@@ -1180,26 +1181,55 @@ static void sata_fsl_host_intr(struct ata_port *ap) void __iomem *hcr_base = host_priv->hcr_base; u32 hstatus, done_mask = 0; struct ata_queued_cmd *qc; - u32 SError; + u32 SError, tag; + u32 status_mask = INT_ON_ERROR; hstatus = ioread32(hcr_base + HSTATUS); sata_fsl_scr_read(&ap->link, SCR_ERROR, &SError); + /* Read command completed register */ + done_mask = ioread32(hcr_base + CC); + + /* Workaround for data length mismatch errata */ + if (unlikely(hstatus & INT_ON_DATA_LENGTH_MISMATCH)) { + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + qc = ata_qc_from_tag(ap, tag); + if (qc && ata_is_atapi(qc->tf.protocol)) { + u32 Hcontrol;
No uppercase in variable names please. Besides, you have 'hstatus' variable already and that would be inconsistent.
+#define HCONTROL_CLEAR_ERROR (1 << 27) + /* Set HControl[27] to clear error registers */ + Hcontrol = ioread32(hcr_base + HCONTROL); + iowrite32(Hcontrol | HCONTROL_CLEAR_ERROR, + hcr_base + HCONTROL); + + /* Clear HControl[27] */ + iowrite32(Hcontrol & (~HCONTROL_CLEAR_ERROR),
Parens not needed around ~HCONTROL_CLEAR_ERROR.
+ hcr_base + HCONTROL);
MBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html