Storage regression in v3.6-rc3 was: Storage related regression in linux-next 20120824

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi again,

On 08/27/2012 06:39 PM, Dieter Ries wrote:
> On 08/27/2012 04:40 PM, Jeff Garzik wrote:
>> On Mon, Aug 27, 2012 at 4:59 AM, Arvydas Sidorenko <asido4@xxxxxxxxx> wrote:
>>> linux-next 20120824 introduced regression on Mac mini 2011 - /root partition
>>> gets mounted as read-only and it stays so even when trying to reboot into
>>> previously working kernel. In order to make it work on older kernel again
>>> `fsck` needs to be executed:
>>> ----------------------------------------------------------------------
>>> Root partition uses ext4 filesystem on Intel 330 SSD connected to SATA3.
>>> dmesg shows that journaling was disabled:
>>> ----------------------------------------------------------------------
>>> I haven't bisected to which exactly tree introduces the regression,
>>> but I can tell
>>> that linux-next 20120813 and v3.6-rc3 work fine.
> 
> I think I experienced this with v3.6-rc3 today as well. I thought my ssd
> (ocz vertex3) was broken first, but then I saw this mail.
> 
> Never happened before on 3.5.something.
> 
> I am trying to reproduce it right now, it happened 2 times before I read
> the mail, I didnt keep the dmesg. Now it's taking it's time to occurr
> again...

It happened again today, and I managed to get a dmesg this time. The
root partition was first, which results in the dmesg you can find
attached. Later the same happened to the home partition, but then I
wasn't able to save a dmesg anymore.

Just to stress this again, this mangles my root partition, resulting in
another forced reboot for fixing it again after a reboot. So I guess
it's possibly dangerous.

It never happened on other kernels, and with 3.6-rc3 it happened on 3
partitions now, as I copied the content of the root partition to
somewhere else on the ssd after it happened first.

>> Can you pastebin 'dmesg' and 'lspci'?  Did this occur only once, or is
>> it reproducible?

Both are attached. I cannot really bisect it, because I cannot trigger
it. It just happens at inconvenien moments...

One funny thing is: The lspci output was different between one boot
where nothing happened, and today after it happened agian. Only 2
revisions changed, but I attached both anyway, the one suffixed "Bad" is
after the problem occured.

>>      Jeff

Cheers,

Dieter

>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at  http://www.tux.org/lkml/
>>
> 
> 

[    0.400346] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.400686] NET: Registered protocol family 1
[    0.400826] pci 0000:00:02.0: Boot video device
[    0.401127] PCI: CLS 64 bytes, default 64
[    0.401160] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.401254] software IO TLB [mem 0xd6995000-0xda994fff] (64MB) mapped at [ffff8800d6995000-ffff8800da994fff]
[    0.404125] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x17
[    0.404228] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x17
[    0.404330] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x17
[    0.404437] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x17
[    0.404682] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[    0.405546] audit: initializing netlink socket (disabled)
[    0.405656] type=2000 audit(1346226458.281:1): initialized
[    0.407750] VFS: Disk quotas dquot_6.5.2
[    0.407921] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.408512] NTFS driver 2.1.30 [Flags: R/W].
[    0.408656] fuse init (API version 7.20)
[    0.409195] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.409722] OCFS2 1.5.0
[    0.409948] ocfs2: Registered cluster interface o2cb
[    0.410035] OCFS2 DLMFS 1.5.0
[    0.410189] OCFS2 User DLM kernel interface loaded
[    0.410277] OCFS2 Node Manager 1.5.0
[    0.410616] OCFS2 DLM 1.5.0
[    0.411049] Btrfs loaded
[    0.411456] GFS2 installed
[    0.411546] msgmni has been set to 15750
[    0.412221] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.412336] io scheduler noop registered
[    0.412420] io scheduler deadline registered (default)
[    0.412535] io scheduler cfq registered
[    0.414252] intel_idle: MWAIT substates: 0x21120
[    0.414258] intel_idle: v0.4 model 0x2A
[    0.414261] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.414541] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.415046] ACPI: AC Adapter [AC] (off-line)
[    0.415731] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.416122] ACPI: Lid Switch [LID]
[    0.416400] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.418552] ACPI: Sleep Button [SLPB]
[    0.418883] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.419003] ACPI: Power Button [PWRF]
[    0.419439] ACPI: Requesting acpi_cpufreq
[    0.432196] thermal LNXTHERM:00: registered as thermal_zone0
[    0.432289] ACPI: Thermal Zone [THM0] (35 C)
[    0.433172] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.435130] Real Time Clock Driver v1.12b
[    0.435989] Non-volatile memory driver v1.3
[    0.436230] Linux agpgart interface v0.103
[    0.436717] tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
[    0.447055] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.447205] ACPI: Battery Slot [BAT0] (battery present)
[    0.472755] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
[    0.473073] [drm] Initialized drm 1.1.0 20060810
[    0.473903] pci 0000:00:00.0: Intel Sandybridge Chipset
[    0.474094] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    0.477256] pci 0000:00:00.0: detected 65536K stolen memory
[    0.477451] i915 0000:00:02.0: setting latency timer to 64
[    0.527434] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[    0.527457] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    0.527549] [drm] Driver supports precise vblank timestamp query.
[    0.527811] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.931657] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    1.030625] fbcon: inteldrmfb (fb0) is primary device
[    1.401540] tsc: Refined TSC clocksource calibration: 2691.258 MHz
[    1.401545] Switching to clocksource tsc
[    1.416243] Console: switching to colour frame buffer device 170x48
[    1.427700] fb0: inteldrmfb frame buffer device
[    1.427780] drm: registered panic notifier
[    1.435055] acpi device:01: registered as cooling_device4
[    1.435423] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    1.435741] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    1.436066] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    1.441433] brd: module loaded
[    1.444219] loop: module loaded
[    1.444282] Uniform Multi-Platform E-IDE driver
[    1.456320] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[    1.456520] Probing IDE interface ide0...
[    1.968968] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    1.969102] Probing IDE interface ide1...
[    2.481299] ide1 at 0x170-0x177,0x376 on irq 15
[    2.481495] ide-gd driver 1.18
[    2.481632] ide-cd driver 5.00
[    2.481963] ahci 0000:00:1f.2: version 3.0
[    2.482085] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    2.482348] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[    2.482499] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst 
[    2.482650] ahci 0000:00:1f.2: setting latency timer to 64
[    2.485249] scsi0 : ahci
[    2.485612] scsi1 : ahci
[    2.485919] scsi2 : ahci
[    2.486295] scsi3 : ahci
[    2.486604] scsi4 : ahci
[    2.490502] scsi5 : ahci
[    2.494324] ata1: SATA max UDMA/133 abar m2048@0xf1628000 port 0xf1628100 irq 41
[    2.497992] ata2: DUMMY
[    2.501600] ata3: DUMMY
[    2.505139] ata4: DUMMY
[    2.508604] ata5: DUMMY
[    2.512011] ata6: DUMMY
[    2.516074] tun: Universal TUN/TAP device driver, 1.6
[    2.519498] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    2.523107] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
[    2.526511] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[    2.529953] e1000e 0000:00:19.0: setting latency timer to 64
[    2.530113] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.533681] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[    2.726566] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:62:27:e9
[    2.730076] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[    2.733623] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    2.737214] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.740827] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.740836] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    2.744264] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.751618] ehci_hcd 0000:00:1a.0: debug port 2
[    2.755015] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    2.755053] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf162a000
[    2.763753] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.767500] hub 1-0:1.0: USB hub found
[    2.770757] hub 1-0:1.0: 3 ports detected
[    2.774111] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.774119] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    2.777319] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.784472] ehci_hcd 0000:00:1d.0: debug port 2
[    2.787619] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    2.787654] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1629000
[    2.796710] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.800267] hub 2-0:1.0: USB hub found
[    2.803391] hub 2-0:1.0: 3 ports detected
[    2.806641] uhci_hcd: USB Universal Host Controller Interface driver
[    2.809836] Initializing USB Mass Storage driver...
[    2.812951] usbcore: registered new interface driver usb-storage
[    2.815942] USB Mass Storage support registered.
[    2.819144] usbcore: registered new interface driver usbserial
[    2.819688] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.825312] usbcore: registered new interface driver usbserial_generic
[    2.828393] USB Serial support registered for generic
[    2.831408] usbserial: USB Serial Driver core
[    2.834500] usbcore: registered new interface driver pl2303
[    2.837685] USB Serial support registered for pl2303
[    2.840955] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    2.847296] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.850425] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.853990] mousedev: PS/2 mouse device common for all mice
[    2.858022] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    2.861942] md: linear personality registered for level -1
[    2.865211] md: multipath personality registered for level -4
[    2.868568] device-mapper: uevent: version 1.0.3
[    2.872051] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@xxxxxxxxxx
[    2.875545] device-mapper: multipath: version 1.5.0 loaded
[    2.875692] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.882419] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.886005] device-mapper: multipath queue-length: version 0.1.0 loaded
[    2.889623] device-mapper: multipath service-time: version 0.2.0 loaded
[    2.893516] cpuidle: using governor ladder
[    2.897413] cpuidle: using governor menu
[    2.901321] sdhci: Secure Digital Host Controller Interface driver
[    2.904884] sdhci: Copyright(c) Pierre Ossman
[    2.908366] EFI Variables Facility v0.08 2004-May-17
[    2.912841] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[    2.916281] thinkpad_acpi: http://ibm-acpi.sf.net/
[    2.919727] thinkpad_acpi: ThinkPad BIOS 8DET47WW (1.17 ), EC unknown
[    2.923175] thinkpad_acpi: Lenovo ThinkPad X220, model 4286CTO
[    2.928406] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[    2.931894] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.931909] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.932130] thinkpad_acpi: radio switch found; radios are enabled
[    2.932348] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[    2.932395] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    2.932397] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    2.937107] Registered led device: tpacpi::thinklight
[    2.937385] Registered led device: tpacpi::power
[    2.937531] Registered led device: tpacpi::standby
[    2.937747] Registered led device: tpacpi::thinkvantage
[    2.937772] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    2.938148] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    2.942003] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[    2.944012] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[    2.964575] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    3.075442] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    3.160093] ata1.00: ATA-9: OCZ-VERTEX3 MI, 2.06, max UDMA/133
[    3.164056] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.194902] hub 1-1:1.0: USB hub found
[    3.199012] hub 1-1:1.0: 6 ports detected
[    3.306065] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    3.335960] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    3.335975] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    3.340011] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    3.425445] hub 2-1:1.0: USB hub found
[    3.429586] hub 2-1:1.0: 8 ports detected
[    3.458981] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    3.463440] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    3.467901] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    3.475810] TCP: cubic registered
[    3.479737] Initializing XFRM netlink socket
[    3.483616] NET: Registered protocol family 17
[    3.487478] NET: Registered protocol family 15
[    3.491310] Key type dns_resolver registered
[    3.497593] PM: Hibernation image not present or could not be loaded.
[    3.497612] registered taskstats version 1
[    3.506462] ALSA device list:
[    3.507417]   #0: HDA Intel PCH at 0xf1620000 irq 43
[    3.508385]   #29: ThinkPad Console Audio Control at EC reg 0x30, fw unknown
[    3.508406] usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
[    3.510333] ata1.00: configured for UDMA/133
[    3.511389] scsi 0:0:0:0: Direct-Access     ATA      OCZ-VERTEX3 MI   2.06 PQ: 0 ANSI: 5
[    3.512594] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    3.513633] sd 0:0:0:0: [sda] Write Protect is off
[    3.514557] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.514568] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.516537]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
[    3.518022] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.669832] usb 1-1.6: new high-speed USB device number 4 using ehci_hcd
[    3.864807] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00, board id: 1611, fw id: 774180
[    3.865850] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    3.917722] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[    3.924841] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[    3.928403] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[    3.929471] VFS: Mounted root (ext4 filesystem) readonly on device 8:9.
[    3.931283] devtmpfs: mounted
[    3.932411] Freeing unused kernel memory: 532k freed
[    4.149492] systemd-udevd[1044]: starting version 189
[    4.197370] cfg80211: Calling CRDA to update world regulatory domain
[    4.198832] xhci_hcd 0000:0e:00.0: xHCI Host Controller
[    4.198840] xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 3
[    4.199025] xhci_hcd 0000:0e:00.0: irq 18, io mem 0xf0c00000
[    4.199102] xhci_hcd 0000:0e:00.0: irq 44 for MSI/MSI-X
[    4.199109] xhci_hcd 0000:0e:00.0: irq 45 for MSI/MSI-X
[    4.199115] xhci_hcd 0000:0e:00.0: irq 46 for MSI/MSI-X
[    4.199121] xhci_hcd 0000:0e:00.0: irq 47 for MSI/MSI-X
[    4.199139] xhci_hcd 0000:0e:00.0: irq 48 for MSI/MSI-X
[    4.199351] xHCI xhci_add_endpoint called for root hub
[    4.199353] xHCI xhci_check_bandwidth called for root hub
[    4.199385] hub 3-0:1.0: USB hub found
[    4.199393] hub 3-0:1.0: 2 ports detected
[    4.199460] xhci_hcd 0000:0e:00.0: xHCI Host Controller
[    4.199464] xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 4
[    4.202518] xHCI xhci_add_endpoint called for root hub
[    4.202520] xHCI xhci_check_bandwidth called for root hub
[    4.202553] hub 4-0:1.0: USB hub found
[    4.202563] hub 4-0:1.0: 2 ports detected
[    4.205243] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    4.205246] Copyright(c) 2003-2012 Intel Corporation
[    4.205372] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[    4.205374] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900040b8000
[    4.205376] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
[    4.205467] iwlwifi 0000:03:00.0: irq 49 for MSI/MSI-X
[    4.214353] WARNING! power/level is deprecated; use power/control instead
[    4.390062] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
[    4.401912] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[    4.401914] iwldvm: Copyright(c) 2003-2012 Intel Corporation
[    4.401939] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    4.401940] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    4.401942] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    4.401943] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[    4.401944] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
[    4.401946] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[    4.402003] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[    4.402141] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
[    4.404918] cfg80211: World regulatory domain updated:
[    4.404921] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    4.404922] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.404924] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    4.404925] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    4.404926] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.404927] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.412683] iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
[    4.412685] iwlwifi 0000:03:00.0: Device SKU: 0x1F0
[    4.412686] iwlwifi 0000:03:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
[    4.412764] Registered led device: phy0-led
[    4.557440] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    5.049986] EXT4-fs (sda9): re-mounted. Opts: (null)
[    5.094199] Adding 1953260k swap on /dev/sda6.  Priority:-1 extents:1 across:1953260k SS
[    5.109115] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    5.110869] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[    5.789723] NET: Registered protocol family 10
[    5.821792] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[    5.821945] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[    6.105558] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[    6.105711] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[    6.220291] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    9.642055] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    9.891626] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input10
[   11.263670] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[   11.363871] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[   11.364199] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.091822] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   24.091898] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   28.498006] ata1.00: configured for UDMA/133
[   28.498019] ata1: EH complete
[   28.592086] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   28.766242] EXT4-fs (sda9): re-mounted. Opts: commit=600
[   28.770278] EXT4-fs (sda7): re-mounted. Opts: commit=600
[   28.771691] EXT4-fs (sda8): re-mounted. Opts: commit=600
[   38.069095] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[  147.806156] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[  147.806296] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  147.926699] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  148.210355] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[  148.311411] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[  148.311619] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  148.588466] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[  148.689017] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[  148.689348] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  151.871353] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[  151.871435] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  210.566072] e1000e: eth0 NIC Link is Down
[  212.715582] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[  212.815929] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[  212.816223] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  212.864859] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[  212.865012] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  212.988246] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  213.269012] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[  213.369202] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[  213.369499] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  889.879803] Bluetooth: Core ver 2.16
[  889.879859] NET: Registered protocol family 31
[  889.879865] Bluetooth: HCI device and connection manager initialized
[  889.879871] Bluetooth: HCI socket layer initialized
[  889.879876] Bluetooth: L2CAP socket layer initialized
[  889.879890] Bluetooth: SCO socket layer initialized
[  897.506385] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D2
[  899.686235] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D2
[ 1081.589714] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 1084.721086] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 1084.721156] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1090.922827] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 1090.922980] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 1091.044239] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1091.378494] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 1091.478886] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 1091.480111] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1091.782043] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 1091.882283] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 1091.882587] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1094.857584] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 1099.107464] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 1099.107550] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3660.087029] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x40000 action 0x6 frozen
[ 3660.087049] ata1: SError: { CommWake }
[ 3660.087056] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3660.087070] ata1.00: cmd 61/28:00:d8:75:3e/00:00:0c:00:00/40 tag 0 ncq 20480 out
[ 3660.087070]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3660.087075] ata1.00: status: { DRDY }
[ 3660.087080] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3660.087088] ata1.00: cmd 61/50:08:10:73:ab/00:00:0c:00:00/40 tag 1 ncq 40960 out
[ 3660.087088]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3660.087091] ata1.00: status: { DRDY }
[ 3660.087099] ata1: hard resetting link
[ 3660.391483] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3660.520637] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 3660.520651] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 3660.520658] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3660.550711] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 3660.550722] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 3660.550729] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3660.557480] ata1.00: configured for UDMA/133
[ 3660.557814] ata1.00: device reported invalid CHS sector 0
[ 3660.557822] ata1.00: device reported invalid CHS sector 0
[ 3660.557842] sd 0:0:0:0: [sda]  
[ 3660.557847] Result: hostbyte=0x00 driverbyte=0x08
[ 3660.557852] sd 0:0:0:0: [sda]  
[    3.512834] ACPI: Invalid Power Resource to register!
[ 3660.557855] Sense Key : 0xb [current] [descriptor]
[ 3660.557864] Descriptor sense data with sense descriptors (in hex):
[ 3660.557868]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[ 3660.557886]         00 00 00 00 
[ 3660.557895] sd 0:0:0:0: [sda]  
[ 3660.557898] ASC=0x0 ASCQ=0x0
[ 3660.557904] sd 0:0:0:0: [sda] CDB: 
[ 3660.557906] cdb[0]=0x2a: 2a 00 0c 3e 75 d8 00 00 28 00
[ 3660.557923] end_request: I/O error, dev sda, sector 205419992
[ 3660.557942] Buffer I/O error on device sda9, logical block 1237559
[ 3660.557950] Buffer I/O error on device sda9, logical block 1237560
[ 3660.557953] Buffer I/O error on device sda9, logical block 1237561
[ 3660.557956] Buffer I/O error on device sda9, logical block 1237562
[ 3660.557957] Buffer I/O error on device sda9, logical block 1237563
[ 3660.557967] EXT4-fs warning (device sda9): ext4_end_bio:250: I/O error writing to inode 795189 (offset 0 size 20480 starting block 25677504)
[ 3660.557985] sd 0:0:0:0: [sda]  
[ 3660.557986] Result: hostbyte=0x00 driverbyte=0x08
[ 3660.557988] sd 0:0:0:0: [sda]  
[ 3660.557989] Sense Key : 0xb [current] [descriptor]
[ 3660.557992] Descriptor sense data with sense descriptors (in hex):
[ 3660.557993]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[ 3660.558001]         00 00 00 00 
[ 3660.558005] sd 0:0:0:0: [sda]  
[ 3660.558006] ASC=0x0 ASCQ=0x0
[ 3660.558008] sd 0:0:0:0: [sda] CDB: 
[ 3660.558009] cdb[0]=0x2a: 2a 00 0c ab 73 10 00 00 50 00
[ 3660.558016] end_request: I/O error, dev sda, sector 212562704
[ 3660.558031] ata1: EH complete
[ 3660.558067] Aborting journal on device sda9-8.
[ 3660.558071] EXT4-fs error (device sda9) in ext4_reserve_inode_write:4543: Journal has aborted
[ 3660.558133] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3660.558456] EXT4-fs error (device sda9) in ext4_orphan_add:2422: Journal has aborted
[ 3660.559219] EXT4-fs error (device sda9) in ext4_reserve_inode_write:4543: Journal has aborted
[ 3660.559230] EXT4-fs error (device sda9): ext4_journal_start_sb:348: Detected aborted journal
[ 3660.559252] EXT4-fs (sda9): Remounting filesystem read-only
[ 5714.704702] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5723.457642] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D2
[ 5727.104589] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5727.388157] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5732.729641] usb 2-1.2: new high-speed USB device number 3 using ehci_hcd
[ 5732.831456] scsi6 : usb-storage 2-1.2:1.0
[ 5733.834996] scsi 6:0:0:0: Direct-Access     Generic  USB  SD Reader   1.00 PQ: 0 ANSI: 0 CCS
[ 5733.838741] sd 6:0:0:0: [sdb] 15556608 512-byte logical blocks: (7.96 GB/7.41 GiB)
[ 5733.839959] sd 6:0:0:0: [sdb] Write Protect is off
[ 5733.839973] sd 6:0:0:0: [sdb] Mode Sense: 4b 00 00 08
[ 5733.840519] sd 6:0:0:0: [sdb] No Caching mode page present
[ 5733.840530] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 5733.844110] sd 6:0:0:0: [sdb] No Caching mode page present
[ 5733.844126] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 5733.845612]  sdb: sdb1
[ 5733.847684] sd 6:0:0:0: [sdb] No Caching mode page present
[ 5733.847691] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 5733.847698] sd 6:0:0:0: [sdb] Attached SCSI removable disk
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34)
0d:00.0 SD Host controller: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 04)
0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34)
0d:00.0 SD Host controller: Ricoh Co Ltd Device e823 (rev ff)
0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev ff)

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux