On 12/06/2011 07:09 AM, Ben Whitten wrote:
Hi,
I seem to have found a problem with DMA on a motherboard using an ICH7-M
chipset, this bug prevents me from installing to the harddrive and I
have been unable to find a workaround.
The motherboard is a Unicorn computers ENDAT-2794A motherboard[1]
When I try to run the Ubuntu 11.10 USB install image which is using
kernel 3.0 the system jams for a good few minutes at a stage in boot
then eventually comes up. In the dmesg I see the following;
[ 332.656551] ata1.01: configured for UDMA/33
[ 332.656590] ata1: EH complete
[ 332.716560] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 332.716776] ata1.01: BMDMA stat 0x44
[ 332.716887] ata1.01: failed command: READ DMA
[ 332.717029] ata1.01: cmd c8/00:08:78:03:00/00:00:00:00:00/f0 tag 0
dma 4096 in
[ 332.717034] res 50/00:00:7f:03:00/00:00:12:00:00/f0 Emask
0x2 (HSM violation)
[ 332.717435] ata1.01: status: { DRDY }
[ 332.717564] ata1: soft resetting link
[ 332.900593] ata1.01: configured for UDMA/33
[ 332.900631] ata1: EH complete
[ 332.949133] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 332.949344] ata1.01: BMDMA stat 0x44
[ 332.949454] ata1.01: failed command: READ DMA
[ 332.949593] ata1.01: cmd c8/00:08:90:03:00/00:00:00:00:00/f0 tag 0
dma 4096 in
[ 332.949598] res 50/00:00:97:03:00/00:00:12:00:00/f0 Emask
0x2 (HSM violation)
[ 332.950006] ata1.01: status: { DRDY }
[ 332.950130] ata1: soft resetting link
Prior to this it gets configured for UDMA/133 which I believe is out of
spec for the ICH7 following information on a previous fixed bug[2]. It
eventually backs it down to 33, which is probably where the system
unlocks and can continue to boot.
That speed limitation only applies to PATA ports. The UDMA speed
selection doesn't really do much or anything with SATA devices. It
doesn't look like it has any effect on this issue since from the dmesg
on the Launchpad report, the problems continue after we speed down to
UDMA33.
I have also tried this with a development snapshot of Ubuntu 12.04 using
kernel 3.2 with the same result.
I have attached a screen shot of the IDE BIOS options in case a default
is wrong or there is a workaround until the bug is fixed. Further system
information and logs can be found on the generated ubuntu launchpad bug
report [3].
Is this hardware setup known to be working? Is there a previous kernel
or other OS that worked?
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
