atapi_pio_bytes() uses bare numbers for the ATAPI interrupt reason bits despite these are #define'd in <linux/ata.h>. Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx> --- This patch is against the recent Linus' tree. Changes in v2: corrected typo in the patch description. drivers/ata/libata-sff.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) Index: linux-2.6/drivers/ata/libata-sff.c =================================================================== --- linux-2.6.orig/drivers/ata/libata-sff.c +++ linux-2.6/drivers/ata/libata-sff.c @@ -929,11 +929,11 @@ static void atapi_pio_bytes(struct ata_q bytes = (bc_hi << 8) | bc_lo; /* shall be cleared to zero, indicating xfer of data */ - if (unlikely(ireason & (1 << 0))) + if (unlikely(ireason & ATAPI_COD)) goto atapi_check; /* make sure transfer direction matches expected */ - i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0; + i_write = ((ireason & ATAPI_IO) == 0) ? 1 : 0; if (unlikely(do_write != i_write)) goto atapi_check; -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
