Add platform hooks for custom suspend() and resume() functions. The
generic suspend/resume code in drivers/ata/ahci_platform.c is adapted
from the PCI version in drivers/ata/ahci.c.
Signed-off-by: Brian Norris <computersforpeace@xxxxxxxxx>
---
Based on:
git://github.com/jgarzik/libata-dev.git ALL
v2: * supports AHCI suspend/resume even when pdata, pdata->suspend, or
pdata->resume are not supplied
* use dev_get_platdata() consistently
drivers/ata/ahci_platform.c | 68 +++++++++++++++++++++++++++++++++++++++++
include/linux/ahci_platform.h | 2 +
2 files changed, 70 insertions(+), 0 deletions(-)
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 43b8758..48be4e1 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -202,6 +202,71 @@ static int __devexit ahci_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM
+static int ahci_suspend(struct device *dev)
+{
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ u32 ctl;
+ int rc;
+
+ if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
+ dev_err(dev, "firmware update required for suspend/resume\n");
+ return -EIO;
+ }
+
+ /*
+ * AHCI spec rev1.1 section 8.3.3:
+ * Software must disable interrupts prior to requesting a
+ * transition of the HBA to D3 state.
+ */
+ ctl = readl(mmio + HOST_CTL);
+ ctl &= ~HOST_IRQ_EN;
+ writel(ctl, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
+
+ rc = ata_host_suspend(host, PMSG_SUSPEND);
+ if (rc)
+ return rc;
+
+ if (pdata && pdata->suspend)
+ return pdata->suspend(dev);
+ return 0;
+}
+
+static int ahci_resume(struct device *dev)
+{
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
+ struct ata_host *host = dev_get_drvdata(dev);
+ int rc;
+
+ if (pdata && pdata->resume) {
+ rc = pdata->resume(dev);
+ if (rc)
+ return rc;
+ }
+
+ if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
+ rc = ahci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_init_controller(host);
+ }
+
+ ata_host_resume(host);
+
+ return 0;
+}
+
+static struct dev_pm_ops ahci_pm_ops = {
+ .suspend = &ahci_suspend,
+ .resume = &ahci_resume,
+};
+#endif
+
static const struct of_device_id ahci_of_match[] = {
{ .compatible = "calxeda,hb-ahci", },
{},
@@ -214,6 +279,9 @@ static struct platform_driver ahci_driver = {
.name = "ahci",
.owner = THIS_MODULE,
.of_match_table = ahci_of_match,
+#ifdef CONFIG_PM
+ .pm = &ahci_pm_ops,
+#endif
},
.id_table = ahci_devtype,
};
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
index be3d9a7..73a2500 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -23,6 +23,8 @@ struct ata_port_info;
struct ahci_platform_data {
int (*init)(struct device *dev, void __iomem *addr);
void (*exit)(struct device *dev);
+ int (*suspend)(struct device *dev);
+ int (*resume)(struct device *dev);
const struct ata_port_info *ata_port_info;
unsigned int force_port_map;
unsigned int mask_port_map;
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
