On Wed, 2 Nov 2011, Lin Ming wrote:
> Adds ->suspend and ->resume callbacks in struct scsi_host_template
> to do host runtime power management.
>
> Signed-off-by: Lin Ming <ming.m.lin@xxxxxxxxx>
> ---
> drivers/scsi/scsi_pm.c | 34 +++++++++++++++++++++++++++++++---
> include/scsi/scsi_host.h | 8 ++++++++
> 2 files changed, 39 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
> index 1be6c5a..5742bed2 100644
> --- a/drivers/scsi/scsi_pm.c
> +++ b/drivers/scsi/scsi_pm.c
> @@ -42,6 +42,28 @@ static int scsi_dev_type_resume(struct device *dev)
> return err;
> }
>
> +static int scsi_host_suspend(struct device *dev)
> +{
> + struct Scsi_Host *shost = dev_to_shost(dev);
> + int err = 0;
> +
> + if (shost->hostt->suspend)
> + err = shost->hostt->suspend(shost);
> +
> + return err;
> +}
> +
> +static int scsi_host_resume(struct device *dev)
> +{
> + struct Scsi_Host *shost = dev_to_shost(dev);
> + int err = 0;
> +
> + if (shost->hostt->resume)
> + err = shost->hostt->resume(shost);
> +
> + return err;
> +}
These don't need to be independent routines. You can put them inline
in scsi_runtime_suspend() and scsi_runtime_resume() below; that's how
the device code is written.
> @@ -132,7 +160,7 @@ static int scsi_runtime_idle(struct device *dev)
>
> /* Insert hooks here for targets, hosts, and transport classes */
>
> - if (scsi_is_sdev_device(dev))
> + if (scsi_is_sdev_device(dev) || scsi_is_host_device(dev))
> err = pm_schedule_suspend(dev, 100);
This is wrong. The 100-ms delay is meant for devices only. There's
no reason to delay suspending a host once everything beneath it is
suspended. Just leave the code the way it is now.
> else
> err = pm_runtime_suspend(dev);
> diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
> index f1f2644..512e2a0 100644
> --- a/include/scsi/scsi_host.h
> +++ b/include/scsi/scsi_host.h
> @@ -356,6 +356,14 @@ struct scsi_host_template {
> enum blk_eh_timer_return (*eh_timed_out)(struct scsi_cmnd *);
>
> /*
> + * Optional routine for scsi host runtime pm.
> + *
> + * Status: OPTIONAL
> + */
> + int (*suspend)(struct Scsi_Host *);
> + int (*resume)(struct Scsi_Host *);
The comment should explain what drivers are supposed to do when these
hooks are called. In particular, the suspend callback should _not_
power-down the entire host adapter; it should power-down only the
circuitry that controls the interface to the SCSI bus. The upstream
interface to the CPU should remain at full power.
If there's no way to power-down just that part of the host adapter then
there's no need to have these callbacks at all. The low-level driver
can simply use the runtime PM API on its own struct device.
Alan Stern
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
