On Wed, Oct 19, 2011 at 05:35:53PM -0700, Gwendal Grignou wrote: > Reenable sending SRST to devices connected behind a Sil3726 PMP. > This allow staggered spinups and handles drives that spins up slowly. > > While the drives spin up, the PMP will not accept SRST. > Most controllers reissue the reset until the drive is ready, while > some [Sil3124] returns an error. > In ata_eh_error, wait for the next reset deadline before resetting the ATA > port and trying again. > > > Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxx> Acked-by: Tejun Heo <tj@xxxxxxxxxx> I hope this can be applied to other controllers too as the failure mode should be similar for all SIMG PMPs. Thanks. -- tejun -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html