From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> Subject: [PATCH] pata_legacy: unify QDI ->set_piomode methods Add controller type field to struct legacy_data and then use it to merge together all ->set_piomode methods for QDI controllers. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> --- earlier references: https://lkml.org/lkml/2009/11/25/362 drivers/ata/pata_legacy.c | 98 ++++++++++------------------------------------ 1 file changed, 23 insertions(+), 75 deletions(-) Index: b/drivers/ata/pata_legacy.c =================================================================== --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -76,15 +76,6 @@ static int all; module_param(all, int, 0444); MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)"); -struct legacy_data { - unsigned long timing; - u8 clock[2]; - u8 last; - int fast; - struct platform_device *platform_dev; - -}; - enum controller { BIOS = 0, SNOOP = 1, @@ -101,6 +92,14 @@ enum controller { UNKNOWN = -1 }; +struct legacy_data { + unsigned long timing; + u8 clock[2]; + u8 last; + int fast; + enum controller type; + struct platform_device *platform_dev; +}; struct legacy_probe { unsigned char *name; @@ -622,40 +621,20 @@ static struct ata_port_operations opti82 .qc_issue = opti82c46x_qc_issue, }; -static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev) -{ - struct ata_timing t; - struct legacy_data *ld_qdi = ap->host->private_data; - int active, recovery; - u8 timing; - - /* Get the timing data in cycles */ - ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); - - if (ld_qdi->fast) { - active = 8 - clamp_val(t.active, 1, 8); - recovery = 18 - clamp_val(t.recover, 3, 18); - } else { - active = 9 - clamp_val(t.active, 2, 9); - recovery = 15 - clamp_val(t.recover, 0, 15); - } - timing = (recovery << 4) | active | 0x08; - - ld_qdi->clock[adev->devno] = timing; - - outb(timing, ld_qdi->timing); -} - /** - * qdi6580dp_set_piomode - PIO setup for dual channel + * qdi65x0_set_piomode - PIO setup for QDI65x0 * @ap: Port * @adev: Device * + * In single channel mode the 6580 has one clock per device and we can + * avoid the requirement to clock switch. We also have to load the timing + * into the right clock according to whether we are master or slave. + * * In dual channel mode the 6580 has one clock per channel and we have * to software clockswitch in qc_issue. */ -static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev) +static void qdi65x0_set_piomode(struct ata_port *ap, struct ata_device *adev) { struct ata_timing t; struct legacy_data *ld_qdi = ap->host->private_data; @@ -673,47 +652,15 @@ static void qdi6580dp_set_piomode(struct recovery = 15 - clamp_val(t.recover, 0, 15); } timing = (recovery << 4) | active | 0x08; - ld_qdi->clock[adev->devno] = timing; - outb(timing, ld_qdi->timing + 2 * ap->port_no); - /* Clear the FIFO */ - if (adev->class != ATA_DEV_ATA) - outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3); -} - -/** - * qdi6580_set_piomode - PIO setup for single channel - * @ap: Port - * @adev: Device - * - * In single channel mode the 6580 has one clock per device and we can - * avoid the requirement to clock switch. We also have to load the timing - * into the right clock according to whether we are master or slave. - */ - -static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev) -{ - struct ata_timing t; - struct legacy_data *ld_qdi = ap->host->private_data; - int active, recovery; - u8 timing; - - /* Get the timing data in cycles */ - ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + if (ld_qdi->type == QDI6580) + outb(timing, ld_qdi->timing + 2 * adev->devno); + else + outb(timing, ld_qdi->timing + 2 * ap->port_no); - if (ld_qdi->fast) { - active = 8 - clamp_val(t.active, 1, 8); - recovery = 18 - clamp_val(t.recover, 3, 18); - } else { - active = 9 - clamp_val(t.active, 2, 9); - recovery = 15 - clamp_val(t.recover, 0, 15); - } - timing = (recovery << 4) | active | 0x08; - ld_qdi->clock[adev->devno] = timing; - outb(timing, ld_qdi->timing + 2 * adev->devno); /* Clear the FIFO */ - if (adev->class != ATA_DEV_ATA) + if (ld_qdi->type != QDI6500 && adev->class != ATA_DEV_ATA) outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3); } @@ -780,20 +727,20 @@ static int qdi_port(struct platform_devi static struct ata_port_operations qdi6500_port_ops = { .inherits = &legacy_base_port_ops, - .set_piomode = qdi6500_set_piomode, + .set_piomode = qdi65x0_set_piomode, .qc_issue = qdi_qc_issue, .sff_data_xfer = vlb32_data_xfer, }; static struct ata_port_operations qdi6580_port_ops = { .inherits = &legacy_base_port_ops, - .set_piomode = qdi6580_set_piomode, + .set_piomode = qdi65x0_set_piomode, .sff_data_xfer = vlb32_data_xfer, }; static struct ata_port_operations qdi6580dp_port_ops = { .inherits = &legacy_base_port_ops, - .set_piomode = qdi6580dp_set_piomode, + .set_piomode = qdi65x0_set_piomode, .qc_issue = qdi_qc_issue, .sff_data_xfer = vlb32_data_xfer, }; @@ -1013,6 +960,7 @@ static __init int legacy_init_one(struct ctrl_addr = devm_ioport_map(&pdev->dev, io + 0x0206, 1); if (!io_addr || !ctrl_addr) goto fail; + ld->type = probe->type; if (controller->setup) if (controller->setup(pdev, probe, ld) < 0) goto fail; -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html