Re: [PATCH v2.6.38-rc7] Revert "libata: ahci_start_engine compliant to AHCI spec"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thursday, May 19, 2011, Jian Peng wrote:
> Hi, Rafael,
> 
> Yes. I tested without reverting the patch that caused failure on E6410 (with
> same AHCI controller), The system is Ubuntu 11.04 with default 2.6.39-rc6
> kernel (guess this should be same kernel as yours before reverting the
> patch).
> 
> My system worked well with AC power cable plugging in and out at boot time,
> at runtime, and during "dd if=/dev/sda5 of=/dev/null ..".

What kind of disk did you use?  Mine is an Intel SSD.

> The config file I mentioned is those under /etc/ or other directories that
> is used to control the power management.

They aren't relevant to this issue.

> Did you test my patch? What it the result?

No, I didn't.  Unfortunately, I won't be able to do any tests on the affected
machine in the near future (most probably for the next two weeks or so).

Thanks,
Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux