Re: [PATCH 0/2] fix libata-sff and pata_cmd64x to not crash on boot on parisc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> > We can detect the Mobility electronics split bridges at least (and I
> > suspect they are the only 'common' CMD64x hot plug device indeed possibly
> > the only one) because the parent bridge of the CMD64x will have a PCI
> > vendor id of 0x14f2 and a device id 0x0001, 0x0002, or 0x0120.
> 
>     What's the issue with these brodges anyway? Why the enable bits are not 
> valid for them?

Good question. I'd assumed because they are hotplugged and so no firmware
gets to set the bits properly ?
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux