> > Have you tested a recent kernel with this device? It looks like it should > have the proper class code so the AHCI driver can load without that specific > device ID. Adding specific device IDs should only be needed for devices that > don't do this (like those that identify as RAID or legacy IDE classes). > Just tested with 2.6.38-8. Device is not recognized and no module is attached to it. 02:00.0 SATA controller: Marvell Technology Group Ltd. 88SE614x SATA II PCI-E controller (rev 01) (prog-if 81) Subsystem: ASUSTeK Computer Inc. Device 81d6 Flags: bus master, fast devsel, latency 0, IRQ 10 I/O ports at bc00 [size=8] I/O ports at b880 [size=4] I/O ports at b800 [size=64] I/O ports at b480 [size=32] Memory at ebdffc00 (32-bit, non-prefetchable) [size=1K] Expansion ROM at ebd80000 [disabled] [size=256K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [e0] Express Legacy Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
