The "struct ata_timing" must contain 10 members, but ".dmack_hold" member was
forgotten for "initial_timing" initialisation. This patch fixes such a problem.
Signed-off-by: Igor Plyatov <plyatov@xxxxxxxxx>
---
drivers/ata/pata_at91.c | 14 ++++++++++++--
1 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 0da0dcc..0267d54 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -49,8 +49,18 @@ struct at91_ide_info {
void __iomem *alt_addr;
};
-static const struct ata_timing initial_timing =
- {XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
+static const struct ata_timing initial_timing = {
+ .mode = XFER_PIO_0,
+ .setup = 70,
+ .act8b = 290,
+ .rec8b = 240,
+ .cyc8b = 600,
+ .active = 165,
+ .recover = 150,
+ .dmack_hold = 0,
+ .cycle = 600,
+ .udma = 0
+};
static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
{
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
