Re: sata problem...

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Mar 12, 2011 at 08:10:51PM -0600, Robert Hancock wrote:
> >I dont know why there is "[    2.098493] ata4.00: failed command: READ FPDMA QUEUED" in dmesg.
> >
> >I have 3 WD Green 1TB HDD, and I samsung 160GB HDD.
> >1 SAMSUNG and 1 WD on the intel SATA,
> >2 WD on the GIGABYTE Sata.
> >I think the problem is only with the gigabye sata port.
> 
> That's an uncorrectable read error the drive is reporting. Most
> likely that hard drive is failing.

Or maybe just a bad sector, in which case just writing it over would
cause the drive to reallocate the failed region.  I think this
partial/transient failure mode is much more common than the whole
drive going south.

Thanks.

-- 
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux