Re: sata_sil24 failed command: READ FPDMA QUEUED

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/13/2010 03:09 PM, Tomas Lund wrote:
Today I plugged in a brand new sil3132 controller (LYCOM SATA PE-103
2-CH) in my server, put it in the secondary graphics-card 16x
PCI-Express slot (I wanted to find out if it worked there), hooked port
0 up to a PMP and attached two disks on port 0 and 1 and powered my
server on.

After getting alot of errors at kernel start when it was detecting the
disks (not saved, sorry) I started to eliminate things and narrow it down:

* SATA-controller is now in a "normal" 1x PCI-Express slot.
* No PMP, just one disk now attached to port 0 on the controller.
* Switched SATA-cable.
* Switched to a different disk (different vendor)

All disks I tried works fine on the motherboard ICH8 controler.

...

ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00020002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete

This seems strange, the drive apparently reported command aborted when trying to read the first sectors of the disk, but there's no indication of why (there's nothing set in Serror).

Can you test the controller in a different machine? It could be faulty..
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux