Re: [RFC 1/2] block: implement an unprep function corresponding directly to prep

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Cc'ed to linux-ide,

On Fri, 2 Jul 2010 13:03:44 +0200
Christoph Hellwig <hch@xxxxxx> wrote:

> On Thu, Jul 01, 2010 at 10:47:12AM +0900, FUJITA Tomonori wrote:
> > I think so. If I can figure out why qemu scsi driver is broken, the
> > job is done.
> 
> Well, I still have problems even with libata + a trim capable SSD.
> Dmesg from the last attept with your patch to use FS requests all the
> way:

Thanks for testing.

Did you tested my discard branch, right?

Wired, I've just got Intel SSD X25-M drives and mkfs.xfs worked well.

REQ_TYPE_FS should give the same scsi_cmnd struct as
REQ_TYPE_BLOCK_PC... I've attached a patch to print some debug info.

Ide people, any idea about what the following error message means?

I've been trying to convert WRITE_SAME_16 from REQ_TYPE_BLOCK_PC to
REQ_TYPE_FS.


> [   27.669404] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen
> [   27.669533] ata2.00: irq_stat 0x08000000, interface fatal error
> [   27.669627] ata2: SError: { UnrecovData Handshk }
> [   27.669720] ata2.00: failed command: WRITE FPDMA QUEUED
> [   27.669819] ata2.00: cmd 61/ff:00:00:00:00/ff:00:00:00:00/40 tag 0 ncq 33553920 out
> [   27.669821]          res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> [   27.670096] ata2.00: status: { DRDY }
> [   27.670196] ata2: hard resetting link
> [   27.975118] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   27.978618] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [   27.978628] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [   27.978756] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [   27.984299] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [   27.984309] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [   27.984437] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [   27.984814] ata2.00: configured for UDMA/133
> [   27.987548] ata2.00: configured for UDMA/133
> [   27.987645] ata2: EH complete
> [   27.987784] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen
> [   27.987915] ata2.00: irq_stat 0x08000000, interface fatal error
> [   27.988026] ata2: SError: { UnrecovData Handshk }
> [   27.988128] ata2.00: failed command: WRITE FPDMA QUEUED
> [   27.988234] ata2.00: cmd 61/ff:00:00:00:00/ff:00:00:00:00/40 tag 0 ncq 33553920 out
> [   27.988236]          res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> [   27.988499] ata2.00: status: { DRDY }
> [   27.988591] ata2: hard resetting link
> [   28.293109] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   28.297509] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [   28.297518] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [   28.297648] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [   28.301854] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [   28.301863] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [   28.301991] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [   28.302378] ata2.00: configured for UDMA/133
> [   28.305024] ata2.00: configured for UDMA/133
> [   28.305123] ata2: EH complete
> [   28.305292] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen
> [   28.305421] ata2.00: irq_stat 0x08000000, interface fatal error
> [   28.305513] ata2: SError: { UnrecovData Handshk }
> [   28.305605] ata2.00: failed command: WRITE FPDMA QUEUED
> [   28.305703] ata2.00: cmd 61/ff:00:00:00:00/ff:00:00:00:00/40 tag 0 ncq 33553920 out
> [   28.305705]          res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> [   28.305948] ata2.00: status: { DRDY }
> [   28.306066] ata2: hard resetting link
> [   28.611111] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   28.613232] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [   28.613241] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [   28.613378] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [   28.619103] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [   28.619112] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [   28.619240] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [   28.619616] ata2.00: configured for UDMA/133
> [   28.623193] ata2.00: configured for UDMA/133
> [   28.623289] ata2: EH complete
> [   28.623427] ata2: limiting SATA link speed to 1.5 Gbps
> [   28.623528] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen
> [   28.623651] ata2.00: irq_stat 0x08000000, interface fatal error
> [   28.623745] ata2: SError: { UnrecovData Handshk }
> [   28.623836] ata2.00: failed command: WRITE FPDMA QUEUED
> [   28.623934] ata2.00: cmd 61/ff:00:00:00:00/ff:00:00:00:00/40 tag 0 ncq 33553920 out
> [   28.623937]          res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> [   28.624202] ata2.00: status: { DRDY }
> [   28.624303] ata2: hard resetting link
> [   28.929103] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   28.932449] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [   28.932458] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [   28.932587] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [   28.939190] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [   28.939200] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [   28.939328] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [   28.939763] ata2.00: configured for UDMA/133
> [   28.941154] ata2.00: configured for UDMA/133
> [   28.941250] ata2: EH complete
> [   28.941414] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen
> [   28.941538] ata2.00: irq_stat 0x08000000, interface fatal error
> [   28.941631] ata2: SError: { UnrecovData Handshk }
> [   28.941722] ata2.00: failed command: WRITE FPDMA QUEUED
> [   28.941821] ata2.00: cmd 61/ff:00:00:00:00/ff:00:00:00:00/40 tag 0 ncq 33553920 out
> [   28.941823]          res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> [   28.942091] ata2.00: status: { DRDY }
> [   28.942187] ata2: hard resetting link
> [   29.247116] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   29.250536] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [   29.250545] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [   29.250673] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [   29.256129] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [   29.256138] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [   29.256266] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [   29.256651] ata2.00: configured for UDMA/133
> [   29.259263] ata2.00: configured for UDMA/133
> [   29.259359] ata2: EH complete
> [   29.259533] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen
> [   29.259659] ata2.00: irq_stat 0x08000000, interface fatal error
> [   29.259752] ata2: SError: { UnrecovData Handshk }
> [   29.259843] ata2.00: failed command: WRITE FPDMA QUEUED
> [   29.259942] ata2.00: cmd 61/ff:00:00:00:00/ff:00:00:00:00/40 tag 0 ncq 33553920 out
> [   29.259945]          res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> [   29.260218] ata2.00: status: { DRDY }
> [   29.260319] ata2: hard resetting link
> [   29.565102] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   29.569593] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [   29.569603] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [   29.569731] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [   29.573969] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [   29.573978] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [   29.574127] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [   29.574543] ata2.00: configured for UDMA/133
> [   29.577217] ata2.00: configured for UDMA/133
> [   29.577313] sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK
> driverbyte=DRIVER_SENSE
> [   29.577460] sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
> [   29.577786] Descriptor sense data with sense descriptors (in hex):
> [   29.577928]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
> [   29.578923]         00 00 00 00
> [   29.579301] sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
> [   29.579496] sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 00 00 00 00 ff ff 00
> [   29.580281] end_request: I/O error, dev sdb, sector 0
> [   29.580395] ata2: EH complete


diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 0a8cd34..70b6b3d 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3020,6 +3020,9 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
 
 	ata_qc_set_pc_nbytes(qc);
 
+	printk("%s %d: %p %d %d %d\n", __func__, __LINE__, scmd,
+	       scsi_bufflen(scmd), qc->extrabytes, size);
+
 	return 0;
 
  invalid_fld:
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index ad0ed21..9e98d0b 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -838,6 +838,13 @@ void scsi_finish_command(struct scsi_cmnd *cmd)
 				"(result %x)\n", cmd->result));
 
 	good_bytes = scsi_bufflen(cmd);
+
+	if (cmd->request->cmd_flags & REQ_DISCARD)
+		printk("%s %d: %p %d %d %d %u %d\n", __func__, __LINE__,
+		       cmd->request, scsi_bufflen(cmd), good_bytes,
+		       scsi_get_resid(cmd), cmd->request->errors,
+		       cmd->result);
+
         if (cmd->request->cmd_type != REQ_TYPE_BLOCK_PC) {
 		int old_good_bytes = good_bytes;
 		drv = scsi_cmd_to_driver(cmd);
@@ -849,9 +856,16 @@ void scsi_finish_command(struct scsi_cmnd *cmd)
 		 * residue if drv->done() error processing indicates no
 		 * change to the completion length.
 		 */
+
+		if (cmd->request->cmd_flags & REQ_DISCARD)
+			printk("%s %d: %p %d %d %d\n", __func__, __LINE__,
+			       cmd->request, good_bytes, old_good_bytes,
+			       scsi_get_resid(cmd));
+
 		if (good_bytes == old_good_bytes)
 			good_bytes -= scsi_get_resid(cmd);
 	}
+
 	scsi_io_completion(cmd, good_bytes);
 }
 EXPORT_SYMBOL(scsi_finish_command);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 8c1b084..f92bbff 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -464,6 +464,10 @@ static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
 	}
 
 	blk_add_request_payload(rq, page, len);
+
+	printk("%s %d: %p %d %d\n", __func__, __LINE__, rq, sdkp->unmap,
+		len);
+
 	return scsi_setup_blk_pc_cmnd(sdp, rq);
 }
 
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux