Juergen Schindele wrote: > > Am Dienstag, 29. Juni 2010 schrieb Kukjin Kim: > > From: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx> > > > > Adds support for the Samsung PATA controller. This driver is based on the > > Libata subsystem and references the earlier patches sent for IDE subsystem. > Dear Kukjin Kim, Hello, Juergen :-) > as i had trouble with CF / trueIDE on PXA, have you read this thread ?? > <http://www.spinics.net/lists/arm-kernel/msg91461.html> > Are you sure you dont need a "dcache_flush-page" ??? > Its just a thought to help you avoid problems. > Thanks for your information. Hmm..Abhilash and I have tested booting root fs on CF several times and haven't found any problems yet. Will test some more to make sure. > Bye > > Signed-off-by: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx> > > Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx> > > Cc: Ben Dooks <ben-linux@xxxxxxxxx> > > --- > > drivers/ata/Kconfig | 9 + > > drivers/ata/Makefile | 1 + > > drivers/ata/pata_samsung_cf.c | 728 > +++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 738 insertions(+), 0 deletions(-) > > create mode 100644 drivers/ata/pata_samsung_cf.c > > (snip) Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html