Hi all,
I've worked a lot on bringing the IRQ 15 to work for my embedded system but
it still fails.
My kernel is the 2.6.29.4 - I've already updated from 2.6.23.3 because
there were some bugs in some ata drivers.
My system is a embedded system with Intel ATOM CPU and Intel 965 chipset.
I need to access some very old ISA-Bus boards. Before I used a Pentium-M
Board that worked perfect.
The new board seems to have problems disabling the IRQ 15 in linux. BIOS
has IRQ 15 reserved for legacy hardware and the IDE port behind it is
disabled - so IRQ15 should be really free.
The 2.6.23.3 found an IDE device and said afterwards that it is disabled
but kept the resources assigned without releasing them - so I was not able
to use the IRQ15 with my own software.
With the 2.6.29.4 I don't get this any longer but the IRQ15 doesn't work
either. Other interrupts are fine (5 or 10) but they are already used by
other hardware components.
Now the interesting part: in MSDOS I'm able to see the IRQ15 from the ISA
board as a source....
So I think that linux somewhere takes the IRQ15 and does not allow me to
use it - and IRQ sharing seems not to be possible in this case.
I need some ideas where to continue my search - I think that it is
somewhere in the libata that blocks this interrupt. /proc/interrupts shows
up no interrupt neither that #15 is used.
Any ideas?
If you need more information please let me know.
Thanks a lot!
Best regards,
Erik
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
