On Wed, Jun 2, 2010 at 10:00 PM, Matthew Garrett <mjg59@xxxxxxxxxxxxx> wrote: > On Wed, Jun 02, 2010 at 09:49:27PM -0400, Marc Dionne wrote: >> Since somewhere early in the 2.6.35 merge window I've been seeing a hang >> during boot. The hang last roughly 30 seconds and is followed by this: >> >> ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen >> ata4.00: failed command: READ FPDMA QUEUED >> ata4.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >> ata4.00: status: { DRDY } >> ata4: hard resetting link >> ahci_is_device_present: status is: 80 >> ahci_is_device_present: status(2) is: 3 >> ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata4.00: configured for UDMA/133 >> ata4.00: device reported invalid CHS sector 0 >> ata4: EH complete >> >> The system works normally once booted. I had some time to do a bisect >> today and it cleanly ended up pointing to this commit: >> 96d60303fd: ahci: Turn off DMA engines when there's no device attached >> >> Reverting the commit makes the system boot cleanly as before. System has >> an Intel ICH10 based board, in AHCI mode, disk is an Intel X25M SSD. > > Hm, interesting. Jeff, any immediate ideas? I don't see this behaviour > on my ICH10. Is there actually a device on ata4? > > -- > Matthew Garrett | mjg59@xxxxxxxxxxxxx Yes, ata4 is the Intel SSD: ata4.00: ATA-7: INTEL SSDSA2MH080G1GC, 045C8610, max UDMA/133 Marc -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html