On Wed, May 06, 2009 at 08:11:21AM +0200, Borislav Petkov wrote: > On Tue, May 05, 2009 at 11:12:59PM +0200, Mark de Wever wrote: > > > In the mean time, Tejun has fixed some ide-tape bugs and has a git > > > tree so if you don't want to wait for the fixes to trickle upstream > > > and are eager to test :) you could pull from > > > > > > git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git ide-phase2 > > > > I compiled 2.6.30-rc4 + ide-phase2 + your 'tmp fix 2' patch + > > IDETAPE_DEBUG_LOG set to 1 > > Actually, I meant only the Tejun tree without my patches. Please retry again if > you have the time or just wait a bit - I finally got an ide tape myself :) : That's good to hear :-) I also managed retested the drive, this time with 2.6.30-rc5 + ide-phase2 + my ide-phase2 compilation fix patch + IDETAPE_DEBUG_LOG This combination seems to work :-) I wrote a small file to the tape and could read it again. After this test I played and tried some more things and got another kernel warning. I haven't been able to reproduce this consistently but it seems to occur after playing a bit with: - writing a file to the drive - use rewind on the drive - use fsf 1 on the drive - reading a file from the drive (I know fsf 1 on /dev/ht0 is rather useless ;-)) I think this problem is not related with the problems I had before, attached the entire dmesg, from boot to the kernel message. If you want I can try to find a way to reproduce it. Thanks for your effort to get the drive working again. -- Regards, Mark de Wever
[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.30-rc5 (root@spearhead) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Mon May 11 20:11:51 CEST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 base 0D0000000 mask FF8000000 write-combining [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] init_memory_mapping: 0000000000000000-000000001fff0000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 1fff0000 @ 7000-c000 [ 0.000000] RAMDISK: 1fc6f000 - 1ffdf792 [ 0.000000] ACPI: RSDP 000f7000 00014 (v00 AMDVIA) [ 0.000000] ACPI: RSDT 1fff3000 00028 (v01 AMDVIA AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 1fff3040 00074 (v01 AMDVIA AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 1fff30c0 022E0 (v01 AMDVIA AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 1fff0000 00040 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1fff0000 [ 0.000000] low ram: 0 - 1fff0000 [ 0.000000] node 0 low ram: 00000000 - 1fff0000 [ 0.000000] node 0 bootmap 00001000 - 00005000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 001fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000100000 - 000045fa2c] TEXT DATA BSS ==> [0000100000 - 000045fa2c] [ 0.000000] #2 [001fc6f000 - 001ffdf792] RAMDISK ==> [001fc6f000 - 001ffdf792] [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #4 [0000460000 - 0000462076] BRK ==> [0000460000 - 0000462076] [ 0.000000] #5 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #6 [0000001000 - 0000005000] BOOTMAP ==> [0000001000 - 0000005000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001fff0 [ 0.000000] HighMem 0x0001fff0 -> 0x0001fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001fff0 [ 0.000000] On node 0 totalpages: 130959 [ 0.000000] free_area_init_node: node 0, pgdat c03942a0, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125968 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935 [ 0.000000] Kernel command line: root=/dev/hda6 ro [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] NR_IRQS:288 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1211.919 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.004000] Initializing HighMem for node 0 (00000000:00000000) [ 0.004000] Memory: 512084k/524224k available (1783k kernel code, 11524k reserved, 894k data, 268k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB) [ 0.004000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 0.004000] .init : 0xc03a0000 - 0xc03e3000 ( 268 kB) [ 0.004000] .data : 0xc02bdf39 - 0xc039da08 ( 894 kB) [ 0.004000] .text : 0xc0100000 - 0xc02bdf39 (1783 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 2423.83 BogoMIPS (lpj=4847676) [ 0.004164] Security Framework initialized [ 0.004219] SELinux: Disabled at boot. [ 0.004282] Mount-cache hash table entries: 512 [ 0.004516] Initializing cgroup subsys ns [ 0.004568] Initializing cgroup subsys cpuacct [ 0.004617] Initializing cgroup subsys devices [ 0.004686] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004740] CPU: L2 Cache: 256K (64 bytes/line) [ 0.004791] Intel machine check architecture supported. [ 0.004840] Intel machine check reporting enabled on CPU#0. [ 0.004903] CPU: AMD Athlon(tm) XP stepping 02 [ 0.005018] Checking 'hlt' instruction... OK. [ 0.020292] ACPI: Core revision 20090320 [ 0.026235] ACPI: setting ELCR to 0200 (from 0e28) [ 0.028062] net_namespace: 1076 bytes [ 0.028570] NET: Registered protocol family 16 [ 0.029203] ACPI: bus type pci registered [ 0.047941] PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=1 [ 0.048005] PCI: Using configuration type 1 for base access [ 0.049914] bio: create slab <bio-0> at 0 [ 0.050540] ACPI: EC: Look up EC in DSDT [ 0.055531] ACPI: Interpreter enabled [ 0.055584] ACPI: (supports S0 S1 S4 S5) [ 0.055786] ACPI: Using PIC for interrupt routing [ 0.062014] ACPI: No dock devices found. [ 0.062087] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.062257] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.062267] pci 0000:00:00.0: reg 14 32bit mmio: [0xe3001000-0xe3001fff] [ 0.062276] pci 0000:00:00.0: reg 18 io port: [0xc000-0xc003] [ 0.062365] pci 0000:00:09.0: reg 10 io port: [0xc400-0xc47f] [ 0.062374] pci 0000:00:09.0: reg 14 32bit mmio: [0xe3000000-0xe300007f] [ 0.062395] pci 0000:00:09.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.062412] pci 0000:00:09.0: supports D1 D2 [ 0.062417] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.062472] pci 0000:00:09.0: PME# disabled [ 0.062546] pci 0000:00:0a.0: reg 10 io port: [0xc800-0xc81f] [ 0.062581] pci 0000:00:0a.0: supports D1 D2 [ 0.062613] pci 0000:00:0a.1: reg 10 io port: [0xcc00-0xcc07] [ 0.062647] pci 0000:00:0a.1: supports D1 D2 [ 0.062683] pci 0000:00:0b.0: reg 10 io port: [0xd000-0xd07f] [ 0.062692] pci 0000:00:0b.0: reg 14 32bit mmio: [0xe3002000-0xe300207f] [ 0.062713] pci 0000:00:0b.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.062729] pci 0000:00:0b.0: supports D1 D2 [ 0.062734] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.062788] pci 0000:00:0b.0: PME# disabled [ 0.062939] pci 0000:00:11.1: reg 20 io port: [0xd400-0xd40f] [ 0.063005] pci 0000:00:11.2: reg 20 io port: [0xd800-0xd81f] [ 0.063066] pci 0000:00:11.3: reg 20 io port: [0xdc00-0xdc1f] [ 0.063204] pci 0000:01:05.0: reg 10 32bit mmio: [0xe0000000-0xe0ffffff] [ 0.063213] pci 0000:01:05.0: reg 14 32bit mmio: [0xd8000000-0xdfffffff] [ 0.063233] pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.063281] pci 0000:00:01.0: bridge 32bit mmio: [0xe0000000-0xe1ffffff] [ 0.063289] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.063299] pci_bus 0000:00: on NUMA node 0 [ 0.063311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.084529] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) [ 0.085259] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) [ 0.085982] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 11 12 14 15) [ 0.086703] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.087690] PCI: Using ACPI for IRQ routing [ 0.088219] pnp: PnP ACPI init [ 0.088277] ACPI: bus type pnp registered [ 0.092851] pnp: PnP ACPI: found 12 devices [ 0.092904] ACPI: ACPI bus type pnp unregistered [ 0.092956] PnPBIOS: Disabled by ACPI PNP [ 0.093023] system 00:00: iomem range 0xd1800-0xd3fff has been reserved [ 0.093079] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 0.093134] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.093190] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.093246] system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved [ 0.093308] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.093364] system 00:00: iomem range 0xffc00000-0xfffe8fff has been reserved [ 0.093420] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.093475] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved [ 0.093536] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.093600] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.128886] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.128939] pci 0000:00:01.0: IO window: disabled [ 0.128993] pci 0000:00:01.0: MEM window: 0xe0000000-0xe1ffffff [ 0.129047] pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff [ 0.129123] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.129129] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.129135] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xe1ffffff] [ 0.129141] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff] [ 0.129232] NET: Registered protocol family 2 [ 0.129454] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.130053] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.130452] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 0.130676] TCP: Hash tables configured (established 16384 bind 16384) [ 0.130729] TCP reno registered [ 0.130889] NET: Registered protocol family 1 [ 0.131058] Trying to unpack rootfs image as initramfs... [ 0.317330] Freeing initrd memory: 3521k freed [ 0.326928] audit: initializing netlink socket (disabled) [ 0.327011] type=2000 audit(1242459091.324:1): initialized [ 0.327335] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.327481] VFS: Disk quotas dquot_6.5.2 [ 0.327592] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.327727] msgmni has been set to 1007 [ 0.328064] alg: No test for stdrng (krng) [ 0.328211] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.328274] io scheduler noop registered [ 0.328321] io scheduler anticipatory registered [ 0.328369] io scheduler deadline registered [ 0.328426] io scheduler cfq registered (default) [ 0.328537] pci 0000:01:05.0: Boot video device [ 0.329201] isapnp: Scanning for PnP cards... [ 0.632055] Switched to high resolution mode on CPU 0 [ 0.682609] isapnp: No Plug & Play device found [ 0.687515] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.687771] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.689526] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.692364] brd: module loaded [ 0.692592] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.693038] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.693797] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.694146] mice: PS/2 mouse device common for all mice [ 0.694327] rtc_cmos 00:04: RTC can wake from S4 [ 0.694522] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.694601] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.694713] cpuidle: using governor ladder [ 0.694762] cpuidle: using governor menu [ 0.694815] No iBFT detected. [ 0.695583] TCP cubic registered [ 0.695632] NET: Registered protocol family 17 [ 0.695701] Using IPI Shortcut mode [ 0.695987] registered taskstats version 1 [ 0.696313] rtc_cmos 00:04: setting system clock to 2009-05-16 07:31:32 UTC (1242459092) [ 0.696459] Freeing unused kernel memory: 268k freed [ 0.713460] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.588125] Uniform Multi-Platform E-IDE driver [ 1.603757] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 1.603820] PCI: setting IRQ 10 as level-triggered [ 1.603832] 3c59x 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 1.603917] 3c59x: Donald Becker and others. [ 1.603975] 0000:00:09.0: 3Com PCI 3c905C Tornado at e08d8000. [ 1.856346] usbcore: registered new interface driver usbfs [ 1.856462] usbcore: registered new interface driver hub [ 1.856591] usbcore: registered new device driver usb [ 1.860444] uhci_hcd: USB Universal Host Controller Interface driver [ 1.865155] Floppy drive(s): fd0 is 1.44M [ 1.883632] FDC 0 is a post-1991 82077 [ 1.900740] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.900804] PCI: setting IRQ 11 as level-triggered [ 1.900816] 3c59x 0000:00:0b.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 1.900915] 0000:00:0b.0: 3Com PCI 3c905C Tornado at e091c000. [ 1.922835] uhci_hcd 0000:00:11.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 1.922911] uhci_hcd 0000:00:11.2: UHCI Host Controller [ 1.923046] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1 [ 1.923139] uhci_hcd 0000:00:11.2: irq 11, io base 0x0000d800 [ 1.923270] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.923325] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.923385] usb usb1: Product: UHCI Host Controller [ 1.923434] usb usb1: Manufacturer: Linux 2.6.30-rc5 uhci_hcd [ 1.923484] usb usb1: SerialNumber: 0000:00:11.2 [ 1.923652] usb usb1: configuration #1 chosen from 1 choice [ 1.923763] hub 1-0:1.0: USB hub found [ 1.923826] hub 1-0:1.0: 2 ports detected [ 1.924112] uhci_hcd 0000:00:11.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 1.924182] uhci_hcd 0000:00:11.3: UHCI Host Controller [ 1.924274] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2 [ 1.924354] uhci_hcd 0000:00:11.3: irq 11, io base 0x0000dc00 [ 1.924470] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.924525] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.924584] usb usb2: Product: UHCI Host Controller [ 1.924633] usb usb2: Manufacturer: Linux 2.6.30-rc5 uhci_hcd [ 1.924684] usb usb2: SerialNumber: 0000:00:11.3 [ 1.924818] usb usb2: configuration #1 chosen from 1 choice [ 1.924924] hub 2-0:1.0: USB hub found [ 1.924985] hub 2-0:1.0: 2 ports detected [ 1.929346] via82cxxx 0000:00:11.1: VIA vt8231 (rev 10) IDE UDMA100 [ 1.929412] via82cxxx 0000:00:11.1: IDE controller (0x1106:0x0571 rev 0x06) [ 1.929518] via82cxxx 0000:00:11.1: not 100% native mode: will probe irqs later [ 1.929584] ide0: BM-DMA at 0xd400-0xd407 [ 1.929642] ide1: BM-DMA at 0xd408-0xd40f [ 1.929699] Probing IDE interface ide0... [ 2.244229] hda: Maxtor 6L160P0, ATA DISK drive [ 2.916125] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 2.917653] hda: UDMA/100 mode selected [ 2.919216] Probing IDE interface ide1... [ 3.656229] hdc: PLEXTOR CD-R PX-W4824A, ATAPI CD/DVD-ROM drive [ 4.496022] hdd: Seagate STT20000A, ATAPI TAPE drive [ 4.496187] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 4.496467] hdc: MWDMA2 mode selected [ 4.496600] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 4.497380] hdd: Disabling (U)DMA for Seagate STT20000A (blacklisted) [ 4.497433] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 4.498680] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.498795] ide1 at 0x170-0x177,0x376 on irq 15 [ 4.534502] ide-gd driver 1.18 [ 4.534619] hda: max request size: 512KiB [ 4.572062] hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63 [ 4.579468] hda: cache flushes supported [ 4.579629] hda:<6>ide-cd driver 5.00 [ 4.588573] hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > [ 4.666985] ide-cd: hdc: ATAPI 40X CD-ROM CD-R/RW drive, 4096kB Cache [ 4.667206] Uniform CD-ROM driver Revision: 3.20 [ 5.078782] PM: Starting manual resume from disk [ 5.137935] kjournald starting. Commit interval 5 seconds [ 5.138009] EXT3-fs: mounted filesystem with writeback data mode. [ 7.232831] udevd version 125 started [ 9.423771] input: PC Speaker as /class/input/input1 [ 9.459607] EDAC MC: Ver: 2.1.0 May 11 2009 [ 9.636512] gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io 0xcc00, speed 1217kHz [ 9.644326] parport_pc: VIA 686A/8231 detected [ 9.644332] parport_pc: probing current configuration [ 9.644350] parport_pc: Current parallel port base: 0x378 [ 9.644399] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] [ 9.657871] EDAC MC0: Giving out device to 'amd76x_edac' 'AMD761': DEV 0000:00:00.0 [ 9.657977] EDAC PCI0: Giving out device to module 'amd76x_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED) [ 9.736179] parport_pc: VIA parallel port: io=0x378, irq=7 [ 10.015786] Linux agpgart interface v0.103 [ 10.397933] input: Power Button as /class/input/input2 [ 10.398066] ACPI: Power Button [PWRF] [ 10.398235] input: Power Button as /class/input/input3 [ 10.398326] ACPI: Power Button [PWRB] [ 10.398492] input: Sleep Button as /class/input/input4 [ 10.398583] ACPI: Sleep Button [SLPB] [ 10.416485] Marking TSC unstable due to TSC halts in idle [ 10.416600] processor ACPI_CPU:00: registered as cooling_device0 [ 10.416656] ACPI: Processor [CPU0] (supports 2 throttling states) [ 11.077343] input: PS/2 Logitech Mouse as /class/input/input5 [ 12.100580] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3 [ 12.100643] PCI: setting IRQ 3 as level-triggered [ 12.100655] EMU10K1_Audigy 0000:00:0a.0: PCI INT A -> Link[LNKC] -> GSI 3 (level, low) -> IRQ 3 [ 12.114126] Control name 'Sigmatel Surround Phase Inversion Playback Switch' truncated to 'Sigmatel Surround Phase Inversion Playback ' [ 14.316158] Adding 497972k swap on /dev/hda5. Priority:-1 extents:1 across:497972k [ 14.603123] EXT3 FS on hda6, internal journal [ 16.395164] kjournald starting. Commit interval 5 seconds [ 16.395383] EXT3 FS on hda7, internal journal [ 16.395466] EXT3-fs: mounted filesystem with writeback data mode. [ 16.460532] kjournald starting. Commit interval 5 seconds [ 16.460763] EXT3 FS on hda8, internal journal [ 16.460847] EXT3-fs: mounted filesystem with writeback data mode. [ 16.517020] kjournald starting. Commit interval 5 seconds [ 16.517259] EXT3 FS on hda10, internal journal [ 16.517340] EXT3-fs: mounted filesystem with writeback data mode. [ 17.502584] nf_conntrack version 0.5.0 (8191 buckets, 32764 max) [ 17.502910] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 17.502972] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 17.503032] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 17.585785] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.512911] eth0: setting full-duplex. [ 24.019943] NET: Registered protocol family 10 [ 24.021288] lo: Disabled Privacy Extensions [ 26.829183] lp0: using parport0 (interrupt-driven). [ 26.865203] ppdev: user-space parallel port driver [ 34.708015] eth0: no IPv6 routers present [ 76.872737] ide-tape: hdd <-> ht0: Seagate STT20000A rev 8A51 [ 76.885052] ide-tape: hdd <-> ht0: 232KBps, 6*54kB buffer, 400ms tDSC [ 428.899115] ------------[ cut here ]------------ [ 428.899173] WARNING: at fs/proc/generic.c:847 remove_proc_entry+0x118/0x134() [ 428.899227] Hardware name: [ 428.899273] remove_proc_entry: removing non-empty directory 'ide1/hdd', leaking at least 'name' [ 428.899336] Modules linked in: ide_tape ppdev lp ipv6 ipt_LOG nf_conntrack_ipv4 nf_defrag_ipv4 xt_state xt_tcpudp iptable_filter ip_tables x_tables nf_conntrack_ftp nf_conntrack snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_util_mem snd_hwdep snd_seq_dummy snd_seq_oss snd_seq_midi processor button psmouse vt8231 snd_rawmidi snd_seq_midi_event amd_k7_agp snd_seq i2c_viapro agpgart serio_raw i2c_core snd_timer snd_seq_device amd76x_edac parport_pc emu10k1_gp gameport snd parport edac_core pcspkr soundcore evdev ext3 jbd mbcache ide_cd_mod cdrom ide_gd_mod via82cxxx floppy uhci_hcd ide_pci_generic ide_core 3c59x usbcore mii thermal fan thermal_sys [ 428.901822] Pid: 2606, comm: mt Not tainted 2.6.30-rc5 #1 [ 428.901874] Call Trace: [ 428.901930] [<c011b1a6>] ? warn_slowpath_fmt+0x7c/0xa0 [ 428.901984] [<c011b1b2>] ? warn_slowpath_fmt+0x88/0xa0 [ 428.902039] [<c0119201>] ? check_preempt_wakeup+0x139/0x166 [ 428.902095] [<c017ee47>] ? pollwake+0x33/0x39 [ 428.902147] [<c01167e8>] ? default_wake_function+0x0/0x8 [ 428.902200] [<c0115168>] ? __wake_up_common+0x2d/0x52 [ 428.902254] [<c0180ffa>] ? clear_inode+0x53/0xb3 [ 428.902306] [<c01a2aee>] ? remove_proc_entry+0x118/0x134 [ 428.902414] [<e08c4d2a>] ? ide_proc_unregister_device+0x2e/0x37 [ide_core] [ 428.902488] [<e08bf305>] ? drive_release_dev+0x17/0x42 [ide_core] [ 428.902549] [<c02445e5>] ? device_release+0x32/0x53 [ 428.902605] [<c01e1e29>] ? kobject_release+0x3d/0x4f [ 428.902657] [<c01e1dec>] ? kobject_release+0x0/0x4f [ 428.902709] [<c01e28cc>] ? kref_put+0x35/0x3f [ 428.902767] [<e0f3c20a>] ? ide_tape_put+0x21/0x2d [ide_tape] [ 428.902826] [<e0f3d278>] ? idetape_chrdev_release+0x185/0x18f [ide_tape] [ 428.902884] [<c01744a2>] ? __fput+0xa6/0x14d [ 428.902935] [<c0171e3a>] ? filp_close+0x4e/0x54 [ 428.902987] [<c0171e8e>] ? sys_close+0x4e/0x74 [ 428.903039] [<c01026a4>] ? sysenter_do_call+0x12/0x22 [ 428.903090] ---[ end trace c00660128585149c ]---
