On Wed, 13 May 2009 20:46:33 +0200
Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> wrote:
> On Wednesday 13 May 2009 19:11:23 Andrey Gusev wrote:
> > On Wed, 13 May 2009 15:28:26 +0200
> > Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> wrote:
> >
> > > On Tuesday 12 May 2009 21:50:24 Andrey Gusev wrote:
> > > > On Mon, 27 Apr 2009 23:21:48 +0200
> > > > Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> wrote:
> > > >
> > > > > On Monday 27 April 2009 22:36:45 Andrey Gusev wrote:
> > > > > > On Sat, 25 Apr 2009 16:48:38 +0200
> > > > > > Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> wrote:
> > > > > >
> > > > > > >
> > > > > > > Hi,
> > > > > > >
> > > > > > > On Saturday 25 April 2009 15:02:03 Andrey Gusev wrote:
> > > > > > > > Hello!
> > > > > > > >
> > > > > > > > I have tested linux-2.6.30-rc3 on my system and find
> > > > > > > > some problems. One of them is delaying on
> > > > > > > > initialization IDE subsystem. I don't have this problem
> > > > > > > > on 2.6.29.1. The difference is looked on log of dmesg.
> > > > > > >
> > > > > > > Unfortunately this doesn't give us any hint about the root
> > > > > > > cause of the bug so please try narrowing the problem down
> > > > > > > to the specific change using git-bisect (sorry, there
> > > > > > > were 212 drivers/ide/ commits during v2.6.29..v2.6.30-rc3
> > > > > > > and much much more non-drivers/ide/ ones).
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Bart
> > > > > > >
> > > > > >
> > > > > > Hello!
> > > > > >
> > > > > >
> > > > > > The full result of bisect is:
> > > > > >
> > > > > >
> > > > > > git bisect start
> > > > > > # good: [8e0ee43bc2c3e19db56a4adaa9a9b04ce885cd84] Linux
> > > > > > 2.6.29 git bisect good
> > > > > > 8e0ee43bc2c3e19db56a4adaa9a9b04ce885cd84 # bad:
> > > > > > [091069740304c979f957ceacec39c461d0192158] Linux 2.6.30-rc3
> > > > > > git bisect bad 091069740304c979f957ceacec39c461d0192158 #
> > > > > > good: [40f07111be99b71c1e8d40c13cdc38445add787f] V4L/DVB
> > > > > > (11166): pvrusb2: Implement status fetching from
> > > > > > sub-devices git bisect good
> > > > > > 40f07111be99b71c1e8d40c13cdc38445add787f # good:
> > > > > > [ba0e1ebb7ea0616eebc29d2077355bacea62a9d8] Staging: sxg:
> > > > > > slicoss: Specify the license for Sahara SXG and Slicoss
> > > > > > drivers git bisect good
> > > > > > ba0e1ebb7ea0616eebc29d2077355bacea62a9d8
> > > > > >
> > > > > >
> > > > > > git bisect start 'drivers/ide/'
> > > > >
> > > > > Please note that limiting search space to drivers/ide/ may not
> > > > > give reliable results in case problem was introduced by some
> > > > > other kernel area.
> > > > >
> > > > > > # good: [ba0e1ebb7ea0616eebc29d2077355bacea62a9d8] Staging:
> > > > > > sxg: slicoss: Specify the license for Sahara SXG and
> > > > > > Slicoss drivers git bisect good
> > > > > > ba0e1ebb7ea0616eebc29d2077355bacea62a9d8 # bad:
> > > > > > [091069740304c979f957ceacec39c461d0192158] Linux 2.6.30-rc3
> > > > > > git bisect bad 091069740304c979f957ceacec39c461d0192158 #
> > > > > > good: [e01f251fd09fa7cb3d352eac7de17bb5d5bd1f9d] ide-cd:
> > > > > > convert cdrom_decode_status() to use switch statements git
> > > > > > bisect good e01f251fd09fa7cb3d352eac7de17bb5d5bd1f9d #
> > > > > > good: [3153c26b54230d025c6d536e8d3015def4524906] ide:
> > > > > > refactor tf_read() method git bisect good
> > > > > > 3153c26b54230d025c6d536e8d3015def4524906 # good:
> > > > > > [c018f1ee5cf81e58b93d9e93a2ee39cad13dc1ac] hpt366: fix
> > > > > > HPT370 DMA timeouts git bisect good
> > > > > > c018f1ee5cf81e58b93d9e93a2ee39cad13dc1ac # bad:
> > > > > > [d5f840bf74c09ca5a31e518c9d984999926b5f44] ide: Remove void
> > > > > > casts git bisect bad
> > > > > > d5f840bf74c09ca5a31e518c9d984999926b5f44 # bad:
> > > > > > [59c8d04f5ee97ea46da854e9adbbaa45d988c39d] hpt366: use
> > > > > > ATA_DMA_* constants git bisect bad
> > > > > > 59c8d04f5ee97ea46da854e9adbbaa45d988c39d
> > > > >
> > > > > Uhh.. something went wrong during bisect.
> > > > >
> > > > > "hpt366: use ATA_DMA_* constants" cannot be a first bad commit
> > > > > because hpt366 is not even used on this system.
> > > > >
> > > > > Could it be that the delay doesn't happen on every boot for
> > > > > "bad" kernels?
> > > > >
> > > > > Also, is 2.6.30-rc1 okay?
> > > > >
> > > > > Thanks,
> > > > > Bart
> > > > >
> > > >
> > > > Hello all!
> > > >
> > > > I continue to find reason of bug. I made more testing with
> > > > bisect and got result:
> > > >
> > > > git bisect start
> > > > # bad: [c018f1ee5cf81e58b93d9e93a2ee39cad13dc1ac] hpt366: fix
> > > > HPT370 DMA timeouts git bisect bad
> > > > # good:
> > > > [fb4252e59452c18b88af014a2c4ee697bbf8cbc6] at91_ide: turn on
> > > > PIO 6 support git bisect good
> > > > fb4252e59452c18b88af014a2c4ee697bbf8cbc6 # good:
> > > > [2e1c63b7ed36532b68f0eddd6a184d7ba1013b89] Merge branch
> > > > 'for-rc1/xen/core' of
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen git
> > > > bisect good 2e1c63b7ed36532b68f0eddd6a184d7ba1013b89 # bad:
> > > > [cd97824994042b809493807ea644ba26c0c23290] Merge
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 git
> > > > bisect bad cd97824994042b809493807ea644ba26c0c23290 # bad:
> > > > [a2c252ebdeaab28c9b400570594d576dae295958] Merge
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes
> > > > git bisect bad a2c252ebdeaab28c9b400570594d576dae295958 # good:
> > > > [b897e6fbc49dd84b2634bca664344d503b907ce9] Merge branch
> > > > 'drm-intel-next' of
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
> > > > git bisect good b897e6fbc49dd84b2634bca664344d503b907ce9 #
> > > > good: [dfbc4752eab33e66f113f9daa2effbe241cd661d] brd: support
> > > > barriers git bisect good
> > > > dfbc4752eab33e66f113f9daa2effbe241cd661d # good:
> > > > [a23c218bd36e11120daf18e00a91d5dc20e288e6] Merge branch 'merge'
> > > > of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
> > > > git bisect good a23c218bd36e11120daf18e00a91d5dc20e288e6 #
> > > > good: [23da64b4714812b66ecf010e7dfb3ed1bf2eda69] Merge branch
> > > > 'for-linus' of git://git.kernel.dk/linux-2.6-block git bisect
> > > > good 23da64b4714812b66ecf010e7dfb3ed1bf2eda69 # good:
> > > > [a228df6339e0d385b8149c860d81b6007f5e9c81] GFS2: Move umount
> > > > flush rwsem git bisect good
> > > > a228df6339e0d385b8149c860d81b6007f5e9c81 # skip:
> > > > [1328df725239804ae30fc7257c1a3185e679b517] GFS2: Use
> > > > DEFINE_SPINLOCK git bisect skip
> > > > 1328df725239804ae30fc7257c1a3185e679b517 # good:
> > > > [10d2198805d7faa2b193485446ff6b1de42c9b78] GFS2: cleanup
> > > > file_operations mess git bisect good
> > > > 10d2198805d7faa2b193485446ff6b1de42c9b78
> > > >
> > > > As I understand, I found bad commit, but it includes 5 commits.
> > > > I checked them and they are good. So, I did git checkout
> > > > a2c252ebdeaab28c9b400570594d576dae295958 and test one more time
> > > > this commit. I found that bag is unstable. The boot can be bad
> > > > or good on this commit. I compared dmesg of 'bad' and 'good'
> > > > booting, but it is equal till delay.
> > >
> > > Thanks for doing it.
> > >
> > > > Any suggestions?
> > >
> > > Hard to tell...
> > >
> > > I went through all commits in-between
> > >
> > > fb4252e59452c18b88af014a2c4ee697bbf8cbc6
> > >
> > > and
> > >
> > > a2c252ebdeaab28c9b400570594d576dae295958
> > >
> > > and there are no obvious candidates..
> > >
> > > Could you please refresh my memory and tell me whether 2.6.30-rc2
> > > was OK?
> > >
> >
> > It was ok, but I don't sure now. I tested only one boot, but this
> > problem is not stable. I am rechecking it.
>
> Ok.
>
> Please also recheck first 'good' commit if 2.6.30-rc2 turns out to be
> 'bad'.
My last testing is very interesting. I check boot of each kernel at
least 10 times. I checked 2.6.30-rc2, it is good. Rest results:
git bisect start
# good: [0882e8dd3aad33eca41696d463bb896e6c8817eb] Linux 2.6.30-rc2
git bisect good 0882e8dd3aad33eca41696d463bb896e6c8817eb
# bad: [a2c252ebdeaab28c9b400570594d576dae295958] Merge
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes git
bisect bad a2c252ebdeaab28c9b400570594d576dae295958 # good:
[c2572f2b4ffc27ba79211aceee3bef53a59bb5cd] brd: fix cacheflushing git
bisect good c2572f2b4ffc27ba79211aceee3bef53a59bb5cd # bad:
[b71a0c296cee4debaf446760fbd29ead1587a7ac] powerpc: pseries/dtl.c
should include asm/firmware.h git bisect bad
b71a0c296cee4debaf446760fbd29ead1587a7ac
Last commit had delay only on 10 time, but it ripped my system, I can't
read any place on my hard drive. I can't mount any other device on it.
Fortunately, I have tmpfs and I mounted second hard disk on it place.
After my computer didn't turn on. It looks like dead drive or
controller, but after on/off and replace disks, it has alived. Below
is log of this bad boot.
[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 1536MB; using 4096kB for hash table (at cfc00000)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.29 (andrey@power-debian) (gcc version 4.3.3 (Debian 4.3.3-3) ) #22 SMP PREEMPT Thu May 14 03:38:55 MSD 2009
[ 0.000000] Found initrd at 0xc1a00000:0xc1f18000
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x24
[ 0.000000] Mapped at 0xff7c0000
[ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at 0xff740000
[ 0.000000] PowerMac motherboard: PowerMac G4 Windtunnel
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] console [udbg0] enabled
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f4000000 ranges:
[ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=1392, gen1=1391
[ 0.000000] nvram: Active bank is: 0
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x60000000, Total RAM: 0x60000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00030000
[ 0.000000] Normal 0x00030000 -> 0x00030000
[ 0.000000] HighMem 0x00030000 -> 0x00060000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00060000
[ 0.000000] On node 0 totalpages: 393216
[ 0.000000] free_area_init_node: node 0, pgdat c042e0c0, node_mem_map c04a7000
[ 0.000000] DMA zone: 1536 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 195072 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1536 pages used for memmap
[ 0.000000] HighMem zone: 195072 pages, LIFO batch:31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390144
[ 0.000000] Kernel command line: root=/dev/mapper/power--group-root ro video=ofonly
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:512
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] irq: irq 55 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 55
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] GMT Delta read from XPRAM: 240 minutes, DST: on
[ 0.000000] time_init: decrementer frequency = 33.304615 MHz
[ 0.000000] time_init: processor frequency = 866.666664 MHz
[ 0.000000] clocksource: timebase mult[781a7d6] shift[22] registered
[ 0.000000] clockevent: decrementer mult[886] shift[16] cpu[0]
[ 0.000302] Console: colour dummy device 80x25
[ 0.000470] console handover: boot [udbg0] -> real [tty0]
[ 0.000705] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22
[ 0.000746] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23
[ 0.001702] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.002875] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.212638] High memory: 786432k
[ 0.212649] Memory: 1544188k/1572864k available (4140k kernel code, 27588k reserved, 152k data, 332k bss, 236k init)
[ 0.212804] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.212833] Calibrating delay loop... 66.56 BogoMIPS (lpj=332800)
[ 0.430490] Security Framework initialized
[ 0.430558] Mount-cache hash table entries: 512
[ 0.431129] device-tree: Duplicate name in /cpus/PowerPC,G4@0/l2-cache, renamed to "l2-cache#1"
[ 0.431233] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.431373] device-tree: Duplicate name in /cpus/PowerPC,G4@1/l2-cache, renamed to "l2-cache#1"
[ 0.431470] device-tree: Duplicate name in /cpus/PowerPC,G4@1, renamed to "l2-cache#1"
[ 0.434862] Initializing cgroup subsys ns
[ 0.434879] Initializing cgroup subsys cpuacct
[ 0.434892] Initializing cgroup subsys devices
[ 0.434905] Initializing cgroup subsys freezer
[ 0.435275] PowerMac SMP probe found 2 cpus
[ 0.435390] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42
[ 0.435439] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.435471] channel 0 bus <multibus>
[ 0.435483] channel 1 bus <multibus>
[ 0.435524] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26
[ 0.435540] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.435561] channel 0 bus <multibus>
[ 0.435581] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.435599] channel 1 bus <multibus>
[ 0.435612] channel 2 bus <multibus>
[ 0.435639] pmf: no parser for command 17 !
[ 0.435701] Processor timebase sync using GPIO 0x73
[ 0.435719] mpic: requesting IPIs ...
[ 0.435741] irq: irq 251 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 251
[ 0.435759] irq: irq 252 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 252
[ 0.435775] irq: irq 253 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 253
[ 0.435792] irq: irq 254 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 254
[ 0.435803] CPU0: L2CR is 80080000
[ 0.435816] CPU0: L3CR is 8f0b0000
[477194871.574718] CPU1: L2CR was 80000
[477194871.574756] CPU1: L2CR set to 80080000
[477194871.574762] CPU1: L3CR was 0
[477194871.574923] CPU1: L3CR set to 8f0b0000
[ 0.437467] Processor 1 found.
[ 0.437528] clockevent: decrementer mult[886] shift[16] cpu[1]
[ 0.437573] Brought up 2 CPUs
[ 0.437747] CPU0 attaching sched-domain:
[ 0.437757] domain 0: span 0-1 level CPU
[ 0.437766] groups: 0 1
[ 0.437783] CPU1 attaching sched-domain:
[ 0.437790] domain 0: span 0-1 level CPU
[ 0.437797] groups: 1 0
[ 0.458104] net_namespace: 568 bytes
[ 0.458801] NET: Registered protocol family 16
[ 0.459386] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25
[ 0.459438] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47
[ 0.459775] PCI: Probing PCI hardware
[ 0.459993] pci 0000:00:10.0: reg 10 32bit mmio: [0x91000000-0x91ffffff]
[ 0.460006] pci 0000:00:10.0: reg 14 32bit mmio: [0x98000000-0x9fffffff]
[ 0.460018] pci 0000:00:10.0: reg 18 32bit mmio: [0x000000-0x07ffff]
[ 0.460041] pci 0000:00:10.0: reg 30 32bit mmio: [0x90000000-0x9001ffff]
[ 0.460141] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48
[ 0.460450] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff]
[ 0.460514] pci 0001:10:18.0: reg 10 32bit mmio: [0x80081000-0x80081fff]
[ 0.460578] pci 0001:10:19.0: reg 10 32bit mmio: [0x80080000-0x80080fff]
[ 0.460683] irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27
[ 0.460727] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28
[ 0.461164] pci 0002:20:0d.0: reg 10 32bit mmio: [0xf5004000-0xf5007fff]
[ 0.461231] pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff]
[ 0.461278] pci 0002:20:0e.0: supports D1 D2
[ 0.461285] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.461309] pci 0002:20:0e.0: PME# disabled
[ 0.461348] pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff]
[ 0.461378] pci 0002:20:0f.0: reg 30 32bit mmio: [0xf5100000-0xf51fffff]
[ 0.461457] irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39
[ 0.461493] irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40
[ 0.461533] irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41
[ 0.461931] pci_bus 0000:00: resource 0 io: [0x802000-0x1001fff]
[ 0.461940] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff]
[ 0.461949] pci_bus 0000:00: resource 2 mem: [0x90000000-0xafffffff]
[ 0.461958] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff]
[ 0.461966] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff]
[ 0.461974] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff]
[ 0.461983] pci_bus 0002:20: resource 0 io: [0xff7fe000-0xffffdfff]
[ 0.461991] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff]
[ 0.463373] bio: create slab <bio-0> at 0
[ 0.464123] usbcore: registered new interface driver usbfs
[ 0.464207] usbcore: registered new interface driver hub
[ 0.464422] usbcore: registered new device driver usb
[ 0.508335] NET: Registered protocol family 2
[ 0.517669] Switched to high resolution mode on CPU 0
[ 0.527669] Switched to high resolution mode on CPU 1
[ 0.617829] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.618895] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.621231] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.622941] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.622971] TCP reno registered
[ 0.647915] NET: Registered protocol family 1
[ 0.648172] checking if image is initramfs...
[ 0.987012] rootfs image is initramfs; unpacking...
[ 0.987066] Freeing initrd memory: 5216k freed
[ 0.988169] Thermal assist unit not available
[ 0.988468] setup_kcore: restrict size=3fffffff
[ 0.988750] audit: initializing netlink socket (disabled)
[ 0.988807] type=2000 audit(1242269633.980:1): initialized
[ 0.990677] highmem bounce pool size: 64 pages
[ 0.995185] VFS: Disk quotas dquot_6.5.2
[ 0.995441] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.996211] msgmni has been set to 1492
[ 0.997485] alg: No test for stdrng (krng)
[ 1.000150] alg: No test for stdrng (ansi_cprng)
[ 1.000238] io scheduler noop registered
[ 1.000270] io scheduler anticipatory registered
[ 1.000286] io scheduler deadline registered
[ 1.000347] io scheduler cfq registered (default)
[ 1.000606] Using unsupported 640x480 NVDA,Display-B at 98004000, depth=8, pitch=1024
[ 1.005902] Console: switching to colour frame buffer device 80x30
[ 1.010427] fb0: Open Firmware frame buffer device on /pci@f0000000/NVDA,Parent@10/NVDA,Display-B@1
[ 1.010699] Using unsupported 640x480 NVDA,Display-A at 99000000, depth=8, pitch=640
[ 1.010998] fb1: Open Firmware frame buffer device on /pci@f0000000/NVDA,Parent@10/NVDA,Display-A@0
[ 1.018282] Generic non-volatile memory driver v1.1
[ 1.020794] Linux agpgart interface v0.103
[ 1.023223] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
[ 1.025864] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 8
[ 1.028475] agpgart-uninorth 0000:00:0b.0: AGP aperture is 32M @ 0x0
[ 1.030957] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.033777] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>)
[ 1.038780] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
[ 1.043994] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
[ 1.051577] brd: module loaded
[ 1.055241] loop: module loaded
[ 1.058028] MacIO PCI driver attached to Keylargo chipset
[ 1.061160] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32
[ 1.061428] irq: irq 19 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19
[ 1.061452] irq: irq 11 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16
[ 1.061561] irq: irq 20 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20
[ 1.061584] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17
[ 1.061699] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18
[ 1.061723] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21
[ 1.061894] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24
[ 1.061918] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29
[ 1.062392] input: Macintosh mouse button emulation as /class/input/input0
[ 1.065414] Uniform Multi-Platform E-IDE driver
[ 1.068180] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
[ 1.071060] adb: starting probe task...
[ 1.073637] adb: finished probe task...
[ 2.097662] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
[ 2.102451] Probing IDE interface ide0...
[ 2.407838] hda: IBM-IC35L060AVVA07-0, ATA DISK drive
[ 2.767650] hdb: QUANTUM FIREBALLP LM20.5, ATA DISK drive
[ 2.770169] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.770346] hda: UDMA/100 mode selected
[ 2.772898] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.773144] hdb: UDMA/66 mode selected
[ 2.775837] ide0 at 0xf1012000-0xf1012070,0xf1012160 on irq 39
[ 67.637652] ide-pmac: Found Apple KeyLargo ATA-4 controller (macio), bus ID 2, irq 19
[ 67.642398] Probing IDE interface ide1...
[ 68.247755] ide1 at 0xf100e000-0xf100e070,0xf100e160 on irq 19
[ 133.147657] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 20
[ 133.152394] Probing IDE interface ide2...
[ 133.577834] hde: PHILIPS CDD5101, ATAPI CD/DVD-ROM drive
[ 133.937729] hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 133.938126] hde: MWDMA2 mode selected
[ 133.941426] ide2 at 0xf1016000-0xf1016070,0xf1016160 on irq 20
[ 133.944047] ide-gd driver 1.18
[ 133.946512] hda: max request size: 128KiB
[ 197.687709] hda: 120103200 sectors (61492 MB) w/1863KiB Cache, CHS=65535/16/63
[ 197.692702] hda: cache flushes supported
[ 197.695404] hda: [mac] hda1 hda2 hda3 hda4
[ 197.717823] hdb: max request size: 128KiB
[ 197.750301] hdb: 40132503 sectors (20547 MB) w/1900KiB Cache, CHS=39813/16/63
[ 197.752759] hdb: cache flushes not supported
[ 197.755223] hdb:<3>ide-pmac lost interrupt, dma status: 8480
[ 217.750084] hdb: lost interrupt
[ 217.752469] hdb: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
[ 217.757462] ide: failed opcode was: unknown
[ 217.762340] hda: DMA disabled
[ 217.764699] hdb: DMA disabled
[ 217.897615] ide0: reset: success
[ 217.945789] hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 >
[ 218.008239] ide-cd driver 5.00
[ 218.012452] ide-cd: hde: ATAPI 32X DVD-ROM CD-R/RW drive, 8192kB Cache
[ 218.014675] Uniform CD-ROM driver Revision: 3.20
[ 218.041570] sungem.c:v0.98 8/24/03 David S. Miller (davem@xxxxxxxxxx)
[ 218.118025] PHY ID: 2060e1, addr: 0
[ 218.128186] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:ab:d1:a6
[ 218.130518] eth0: Found BCM5421 PHY
[ 218.132799] I2O subsystem v1.325
[ 218.134926] i2o: max drivers = 8
[ 218.138279] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 218.140626] ohci_hcd 0001:10:18.0: enabling device (0000 -> 0002)
[ 218.142880] ohci_hcd 0001:10:18.0: OHCI Host Controller
[ 218.157628] ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1
[ 218.161892] ohci_hcd 0001:10:18.0: irq 27, io mem 0x80081000
[ 218.240030] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 218.242268] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 218.246509] usb usb1: Product: OHCI Host Controller
[ 218.248722] usb usb1: Manufacturer: Linux 2.6.29 ohci_hcd
[ 218.251023] usb usb1: SerialNumber: 0001:10:18.0
[ 218.255152] usb usb1: configuration #1 chosen from 1 choice
[ 218.257615] hub 1-0:1.0: USB hub found
[ 218.259953] hub 1-0:1.0: 2 ports detected
[ 218.264399] ohci_hcd 0001:10:19.0: enabling device (0000 -> 0002)
[ 218.266706] ohci_hcd 0001:10:19.0: OHCI Host Controller
[ 218.269059] ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2
[ 218.273371] ohci_hcd 0001:10:19.0: irq 28, io mem 0x80080000
[ 218.349992] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 218.352364] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 218.356914] usb usb2: Product: OHCI Host Controller
[ 218.359266] usb usb2: Manufacturer: Linux 2.6.29 ohci_hcd
[ 218.361639] usb usb2: SerialNumber: 0001:10:19.0
[ 218.364050] usb usb2: configuration #1 chosen from 1 choice
[ 218.366407] hub 2-0:1.0: USB hub found
[ 218.368610] hub 2-0:1.0: 2 ports detected
[ 218.403137] mice: PS/2 mouse device common for all mice
[ 218.405426] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 218.408136] i2c /dev entries driver
[ 218.410538] PowerMac i2c bus pmu 2 registered
[ 218.412830] PowerMac i2c bus pmu 1 registered
[ 218.415060] PowerMac i2c bus mac-io 0 registered
[ 218.417229] PowerMac i2c bus uni-n 1 registered
[ 218.419451] PowerMac i2c bus uni-n 0 registered
[ 218.422341] usbcore: registered new interface driver hiddev
[ 218.425132] usbcore: registered new interface driver usbhid
[ 218.427106] usbhid: v2.6:USB HID core driver
[ 218.430307] TCP cubic registered
[ 218.432145] NET: Registered protocol family 17
[ 218.435219] registered taskstats version 1
[ 218.437607] input: PMU as /class/input/input1
[ 218.450373] rtc-generic rtc-generic: setting system clock to 2009-05-14 06:57:32 UTC (1242284252)
[ 218.453954] Freeing unused kernel memory: 236k init
[ 218.617681] usb 1-1: new low speed USB device using ohci_hcd and address 2
[ 218.816162] usb 1-1: New USB device found, idVendor=0458, idProduct=002e
[ 218.821254] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 218.823404] usb 1-1: Product: NetScroll+ Traveler
[ 218.825530] usb 1-1: Manufacturer: KYE
[ 218.827942] usb 1-1: configuration #1 chosen from 1 choice
[ 218.843184] input: KYE NetScroll+ Traveler as /class/input/input2
[ 218.867896] generic-usb 0003:0458:002E.0001: input,hidraw0: USB HID v1.10 Mouse [KYE NetScroll+ Traveler] on usb-0001:10:18.0-1/input0
[ 219.017769] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 219.206195] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608
[ 219.209052] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 219.211730] usb 2-1: Product: USB2.0 Hub
[ 219.214744] usb 2-1: configuration #1 chosen from 1 choice
[ 219.218282] hub 2-1:1.0: USB hub found
[ 219.222182] hub 2-1:1.0: 4 ports detected
[ 219.538191] usb 2-1.1: new full speed USB device using ohci_hcd and address 3
[ 219.676147] usb 2-1.1: New USB device found, idVendor=05e3, idProduct=0608
[ 219.678837] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 219.683905] usb 2-1.1: Product: USB2.0 Hub
[ 219.686618] usb 2-1.1: configuration #1 chosen from 1 choice
[ 219.691245] hub 2-1.1:1.0: USB hub found
[ 219.694174] hub 2-1.1:1.0: 4 ports detected
[ 219.812810] ieee1394: module_layout: kernel tainted.
[ 219.857852] ohci1394 0002:20:0e.0: enabling device (0000 -> 0002)
[ 219.922300] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 219.990141] usb 2-1.1.1: new low speed USB device using ohci_hcd and address 4
[ 220.120169] usb 2-1.1.1: New USB device found, idVendor=04d9, idProduct=0022
[ 220.122656] usb 2-1.1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 220.127345] usb 2-1.1.1: Product: USB Keyboard
[ 220.129973] usb 2-1.1.1: configuration #1 chosen from 1 choice
[ 220.144320] input: USB Keyboard as /class/input/input3
[ 220.167879] generic-usb 0003:04D9:0022.0002: input,hidraw1: USB HID v1.10 Keyboard [USB Keyboard] on usb-0001:10:19.0-1.1.1/input0
[ 220.193383] input: USB Keyboard as /class/input/input4
[ 220.217831] generic-usb 0003:04D9:0022.0003: input,hidraw2: USB HID v1.10 Device [USB Keyboard] on usb-0001:10:19.0-1.1.1/input1
[ 220.520512] eth0: Link is up at 100 Mbps, full-duplex.
[ 220.833728] device-mapper: uevent: version 1.0.3
[ 220.839499] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[ 221.300357] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000393fffeabd1a6]
[ 248.319095] device-mapper: table: 254:0: crypt: Error allocating crypto tfm
[ 248.321989] device-mapper: ioctl: error adding target to table
[ 248.325455] device-mapper: ioctl: device doesn't appear to be in the dev hash table.
[ 305.646186] kjournald starting. Commit interval 5 seconds
[ 305.646214] EXT3-fs: mounted filesystem with ordered data mode.
[ 309.608189] udev: starting version 141
[ 309.612897] udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
[ 316.600821] EXT3 FS on dm-1, internal journal
[ 317.696928] SCSI subsystem initialized
[ 317.776899] DS1775 digital thermometer [@49]
[ 317.779409] Temp: 52.2 C Hyst: 60.0 C OS: 65.0 C
[ 317.782998] ADM1030 fan controller [@2c]
[ 322.891056] kjournald starting. Commit interval 5 seconds
[ 322.892158] EXT3 FS on dm-3, internal journal
[ 322.892180] EXT3-fs: mounted filesystem with ordered data mode.
[ 322.939021] REISERFS (device dm-4): found reiserfs format "3.6" with standard journal
[ 322.944332] REISERFS (device dm-4): using ordered data mode
[ 322.954313] REISERFS (device dm-4): journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 322.965326] REISERFS (device dm-4): checking transaction log (dm-4)
[ 323.031967] REISERFS (device dm-4): Using r5 hash to sort names
[ 323.160966] Adding 1048568k swap on /dev/mapper/power--group-swap_1. Priority:-1 extents:1 across:1048568k
[ 325.461107] eth0: Link is up at 100 Mbps, full-duplex.
[ 325.463883] eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 325.808809] CPU-temp: 52.2 C, Case: 32.0 C, Fan: 0 (tuned -11)
[ 344.162436] Process Xorg (pid:3051) mapped non-existing PCI legacy memory for 00000:00
[ 471.307621] hda: irq timeout: status=0xc4 { Busy }
[ 471.310558] ide: failed opcode was: unknown
[ 471.367611] ide0: reset: master: error (0x08?)
[ 476.390116] hda: status timeout: status=0xa0 { Busy }
[ 476.393070] ide: failed opcode was: unknown
[ 476.395884] hda: drive not ready for command
[ 476.440117] ide0: reset: master: error (0x08?)
[ 476.450278] end_request: I/O error, dev hda, sector 57379667
[ 476.453129] end_request: I/O error, dev hda, sector 57379675
[ 476.455901] end_request: I/O error, dev hda, sector 57379683
[ 476.458617] end_request: I/O error, dev hda, sector 57379691
[ 476.463376] end_request: I/O error, dev hda, sector 57379699
[ 476.465985] end_request: I/O error, dev hda, sector 57379707
[ 476.468519] end_request: I/O error, dev hda, sector 57379715
[ 476.471171] end_request: I/O error, dev hda, sector 57379723
[ 476.473607] end_request: I/O error, dev hda, sector 57379731
[ 476.476000] end_request: I/O error, dev hda, sector 57379739
[ 476.478329] end_request: I/O error, dev hda, sector 57379747
[ 476.481274] end_request: I/O error, dev hda, sector 57379755
[ 476.483381] end_request: I/O error, dev hda, sector 57379763
[ 476.485372] end_request: I/O error, dev hda, sector 57379771
[ 476.487239] end_request: I/O error, dev hda, sector 57379779
[ 476.488990] end_request: I/O error, dev hda, sector 57379787
[ 476.490850] end_request: I/O error, dev hda, sector 57379795
[ 476.492433] end_request: I/O error, dev hda, sector 57379803
[ 476.493908] end_request: I/O error, dev hda, sector 57379811
[ 476.495343] end_request: I/O error, dev hda, sector 57379819
[ 476.496686] end_request: I/O error, dev hda, sector 57379827
[ 476.497963] end_request: I/O error, dev hda, sector 57379835
[ 476.499138] end_request: I/O error, dev hda, sector 57379843
[ 476.500468] end_request: I/O error, dev hda, sector 57379851
[ 476.501502] end_request: I/O error, dev hda, sector 57379859
[ 476.502474] end_request: I/O error, dev hda, sector 57379867
[ 476.503382] end_request: I/O error, dev hda, sector 57379875
[ 476.504230] end_request: I/O error, dev hda, sector 57379883
[ 476.505032] end_request: I/O error, dev hda, sector 57379891
[ 476.505776] end_request: I/O error, dev hda, sector 57379899
[ 476.506437] end_request: I/O error, dev hda, sector 57379907
[ 476.507100] end_request: I/O error, dev hda, sector 57379915
[ 476.508251] end_request: I/O error, dev hda, sector 117093907
[ 476.509223] end_request: I/O error, dev hda, sector 51253907
[ 476.509924] Buffer I/O error on device dm-3, logical block 4259841
[ 476.511085] lost page write due to I/O error on dm-3
[ 476.511964] end_request: I/O error, dev hda, sector 51253947
[ 476.512928] Buffer I/O error on device dm-3, logical block 4259846
[ 476.513982] lost page write due to I/O error on dm-3
[ 476.515108] end_request: I/O error, dev hda, sector 51455675
[ 476.516340] Buffer I/O error on device dm-3, logical block 4285062
[ 476.517668] lost page write due to I/O error on dm-3
[ 476.519069] end_request: I/O error, dev hda, sector 57379795
[ 476.520877] end_request: I/O error, dev hda, sector 5021603
[ 476.522399] end_request: I/O error, dev hda, sector 5021611
[ 476.523911] end_request: I/O error, dev hda, sector 5021619
[ 476.525422] end_request: I/O error, dev hda, sector 5021627
[ 476.526930] end_request: I/O error, dev hda, sector 5021635
[ 476.528440] end_request: I/O error, dev hda, sector 5021643
[ 476.529948] end_request: I/O error, dev hda, sector 5021651
[ 476.531695] end_request: I/O error, dev hda, sector 5021659
[ 476.533207] end_request: I/O error, dev hda, sector 5021667
[ 476.534713] end_request: I/O error, dev hda, sector 5021675
[ 476.536217] end_request: I/O error, dev hda, sector 5021683
[ 476.537723] end_request: I/O error, dev hda, sector 5021691
[ 476.539228] end_request: I/O error, dev hda, sector 5021699
[ 476.540943] end_request: I/O error, dev hda, sector 5021707
[ 476.540952] end_request: I/O error, dev hda, sector 5021715
[ 476.540959] end_request: I/O error, dev hda, sector 5021723
[ 476.540967] end_request: I/O error, dev hda, sector 5021731
[ 476.540974] end_request: I/O error, dev hda, sector 5021739
[ 476.540982] end_request: I/O error, dev hda, sector 5021747
[ 476.540989] end_request: I/O error, dev hda, sector 5021755
[ 476.540996] end_request: I/O error, dev hda, sector 5021763
[ 476.541004] end_request: I/O error, dev hda, sector 5021771
[ 476.541011] end_request: I/O error, dev hda, sector 5021779
[ 476.541018] end_request: I/O error, dev hda, sector 5021787
[ 476.541026] end_request: I/O error, dev hda, sector 5021795
[ 476.541033] end_request: I/O error, dev hda, sector 5021803
[ 476.541040] end_request: I/O error, dev hda, sector 5021811
[ 476.541047] end_request: I/O error, dev hda, sector 5021819
[ 476.541055] end_request: I/O error, dev hda, sector 5021827
[ 476.541062] end_request: I/O error, dev hda, sector 5021835
[ 476.541069] end_request: I/O error, dev hda, sector 5021843
[ 476.541076] end_request: I/O error, dev hda, sector 5021851
[ 476.541167] end_request: I/O error, dev hda, sector 51254051
[ 476.541184] Buffer I/O error on device dm-3, logical block 4259859
[ 476.541190] lost page write due to I/O error on dm-3
[ 476.541206] end_request: I/O error, dev hda, sector 51319435
[ 476.541223] Buffer I/O error on device dm-3, logical block 4268032
[ 476.541228] lost page write due to I/O error on dm-3
[ 476.541242] end_request: I/O error, dev hda, sector 115925067
[ 476.541262] Buffer I/O error on device dm-4, logical block 2488
[ 476.541268] lost page write due to I/O error on dm-4
[ 476.541286] end_request: I/O error, dev hda, sector 115925075
[ 476.541303] Buffer I/O error on device dm-4, logical block 2489
[ 476.541309] lost page write due to I/O error on dm-4
[ 476.541318] end_request: I/O error, dev hda, sector 115925083
[ 476.541335] Buffer I/O error on device dm-4, logical block 2490
[ 476.541341] lost page write due to I/O error on dm-4
[ 476.541351] end_request: I/O error, dev hda, sector 115925091
[ 476.541365] Buffer I/O error on device dm-4, logical block 2491
[ 476.541371] lost page write due to I/O error on dm-4
[ 476.541380] end_request: I/O error, dev hda, sector 115925099
[ 476.541396] Buffer I/O error on device dm-4, logical block 2492
[ 476.541402] lost page write due to I/O error on dm-4
[ 476.541411] end_request: I/O error, dev hda, sector 115925107
[ 476.541430] end_request: I/O error, dev hda, sector 115925115
[ 476.541448] end_request: I/O error, dev hda, sector 115925123
[ 476.541468] end_request: I/O error, dev hda, sector 115925131
[ 476.541486] end_request: I/O error, dev hda, sector 115925139
[ 476.541514] end_request: I/O error, dev hda, sector 115925147
[ 476.590126] end_request: I/O error, dev hda, sector 5021731
[ 476.610176] REISERFS abort (device dm-4): Journal write error in flush_commit_list
[ 476.620152] end_request: I/O error, dev hda, sector 117008515
[ 476.620198] end_request: I/O error, dev hda, sector 117008523
[ 476.620226] end_request: I/O error, dev hda, sector 117064915
[ 476.620244] end_request: I/O error, dev hda, sector 117064923
[ 476.680674] end_request: I/O error, dev hda, sector 10153627
[ 476.685700] EXT3-fs error (device dm-1): ext3_find_entry: reading directory #290582 offset 0
[ 476.690971] Aborting journal on device dm-1.
[ 476.693632] __journal_remove_journal_head: freeing b_committed_data
[ 476.696663] end_request: I/O error, dev hda, sector 7324251
[ 476.699372] Remounting filesystem read-only
[ 476.702469] end_request: I/O error, dev hda, sector 504459
[ 476.705271] end_request: I/O error, dev hda, sector 10153627
[ 476.707893] EXT3-fs error (device dm-1): ext3_find_entry: reading directory #290582 offset 0
[ 476.713242] end_request: I/O error, dev hda, sector 10153627
[ 476.716038] EXT3-fs error (device dm-1): ext3_find_entry: reading directory #290582 offset 0
[ 476.721960] end_request: I/O error, dev hda, sector 51253907
[ 476.724799] EXT3-fs error (device dm-3): read_inode_bitmap: Cannot read inode bitmap - block_group = 130, inode_bitmap = 4259841
[ 476.731245] end_request: I/O error, dev hda, sector 17175179
[ 476.734460] EXT3-fs error (device dm-3) in ext3_new_inode: IO failure
[ 476.737898] ------------[ cut here ]------------
[ 476.741256] Badness at fs/buffer.c:1128
[ 476.744648] NIP: c00e2b20 LR: c01500f8 CTR: 00000000
[ 476.748028] REGS: c1dadc90 TRAP: 0700 Tainted: GF (2.6.29)
[ 476.751400] MSR: 00029032 <EE,ME,CE,IR,DR> CR: 24042882 XER: 00000000
[ 476.754835] TASK = ef1adb00[3040] 'gdm' THREAD: c1dac000 CPU: 1
[ 476.754991] GPR00: 00000001 c1dadd40 ef1adb00 ef588348 00000179 00000000 00000178 00000002
[ 476.762014] GPR08: 00000078 c0490000 00000000 00000000 24042842 10069a6c c1dade70 c2241400
[ 476.769440] GPR16: 00008180 c1dadd98 00008000 00000001 c031f294 ef46f000 ef6d6fc0 00000000
[ 476.776867] GPR24: c1c44000 c1c45800 00000082 ed450720 00000001 ef588348 c2241400 c1c45800
[ 476.787908] NIP [c00e2b20] mark_buffer_dirty+0x1c/0xd0
[ 476.791661] LR [c01500f8] ext3_commit_super+0x84/0xb0
[ 476.795383] Call Trace:
[ 476.799035] [c1dadd40] [c01500dc] ext3_commit_super+0x68/0xb0 (unreliable)
[ 476.802837] [c1dadd60] [c0151ddc] ext3_handle_error+0xa4/0xd8
[ 476.806649] [c1dadd70] [c0151e78] __ext3_std_error+0x68/0x7c
[ 476.810394] [c1dadd90] [c01461a4] ext3_new_inode+0x9e8/0xadc
[ 476.814068] [c1daddf0] [c014e044] ext3_create+0xc0/0x130
[ 476.817677] [c1dade40] [c00c722c] vfs_create+0xf8/0x180
[ 476.821217] [c1dade60] [c00ca364] do_filp_open+0x1ec/0x804
[ 476.824688] [c1dadf20] [c00ba944] do_sys_open+0x60/0xf8
[ 476.828098] [c1dadf40] [c0014e44] ret_from_syscall+0x0/0x38
[ 476.831450] --- Exception: c01 at 0xf222eb8
[ 476.831454] LR = 0xf6a46c4
[ 476.837862] Instruction dump:
[ 476.840955] 5400d97e 0f000000 2f800000 419eff90 4bffff80 80030000 70090001 40a2002c
[ 476.847307] 3d20c049 8009adf4 7c000034 5400d97e <0f000000> 2f800000 41be0010 38000001
[ 476.855268] end_request: I/O error, dev hda, sector 17175179
[ 476.857706] JBD: Detected IO errors while flushing file data on dm-3
[ 476.860208] end_request: I/O error, dev hda, sector 68297707
[ 476.860250] end_request: I/O error, dev hda, sector 68297715
[ 476.860270] end_request: I/O error, dev hda, sector 68297723
[ 476.860289] end_request: I/O error, dev hda, sector 68297731
[ 476.860308] end_request: I/O error, dev hda, sector 68297739
[ 476.865093] Aborting journal on device dm-3.
[ 476.870556] end_request: I/O error, dev hda, sector 68297371
[ 477.920153] end_request: I/O error, dev hda, sector 6273587
[ 477.922915] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=181302, block=721141
[ 477.931263] end_request: I/O error, dev hda, sector 9507259
[ 477.934081] end_request: I/O error, dev hda, sector 9507267
[ 477.936820] end_request: I/O error, dev hda, sector 9507259
[ 481.608259] end_request: I/O error, dev hda, sector 117064675
[ 481.610980] __ratelimit: 15 callbacks suppressed
[ 481.613584] Buffer I/O error on device dm-4, logical block 144939
[ 481.616264] lost page write due to I/O error on dm-4
[ 481.619986] end_request: I/O error, dev hda, sector 117064923
[ 481.622773] Buffer I/O error on device dm-4, logical block 144970
[ 481.625550] lost page write due to I/O error on dm-4
[ 481.628362] end_request: I/O error, dev hda, sector 117093907
[ 481.631198] Buffer I/O error on device dm-4, logical block 148593
[ 481.633972] lost page write due to I/O error on dm-4
[ 481.636683] end_request: I/O error, dev hda, sector 117008523
[ 481.639374] Buffer I/O error on device dm-4, logical block 137920
[ 481.643163] lost page write due to I/O error on dm-4
[ 481.645925] end_request: I/O error, dev hda, sector 117046539
[ 481.648715] Buffer I/O error on device dm-4, logical block 142672
[ 481.651531] lost page write due to I/O error on dm-4
[ 481.660182] end_request: I/O error, dev hda, sector 116972771
[ 481.660203] Buffer I/O error on device dm-4, logical block 133451
[ 481.660209] lost page write due to I/O error on dm-4
[ 481.660224] end_request: I/O error, dev hda, sector 117035715
[ 481.660237] Buffer I/O error on device dm-4, logical block 141319
[ 481.660243] lost page write due to I/O error on dm-4
[ 536.620138] end_request: I/O error, dev hda, sector 117093907
[ 536.626375] Buffer I/O error on device dm-4, logical block 148593
[ 536.629512] lost page write due to I/O error on dm-4
[ 539.483512] end_request: I/O error, dev hda, sector 57022227
[ 539.486973] EXT3-fs error (device dm-3): ext3_get_inode_loc: unable to read inode block - inode=1247483, block=4980881
[ 539.494313] end_request: I/O error, dev hda, sector 17175179
[ 539.497790] Buffer I/O error on device dm-3, logical block 0
[ 539.501265] lost page write due to I/O error on dm-3
[ 539.509966] end_request: I/O error, dev hda, sector 63575867
[ 539.513515] EXT3-fs error (device dm-3): ext3_get_inode_loc: unable to read inode block - inode=1452367, block=5800086
[ 539.521013] end_request: I/O error, dev hda, sector 17175179
[ 539.524589] Buffer I/O error on device dm-3, logical block 0
[ 539.528136] lost page write due to I/O error on dm-3
[ 539.535505] end_request: I/O error, dev hda, sector 35263131
[ 539.539100] EXT3-fs error (device dm-3): ext3_get_inode_loc: unable to read inode block - inode=565251, block=2260994
[ 539.547379] end_request: I/O error, dev hda, sector 17175179
[ 539.551103] Buffer I/O error on device dm-3, logical block 0
[ 539.554758] lost page write due to I/O error on dm-3
[ 539.562786] end_request: I/O error, dev hda, sector 57022227
[ 539.566532] EXT3-fs error (device dm-3): ext3_get_inode_loc: unable to read inode block - inode=1247479, block=4980881
[ 539.574431] end_request: I/O error, dev hda, sector 17175179
[ 539.578286] Buffer I/O error on device dm-3, logical block 0
[ 539.582031] lost page write due to I/O error on dm-3
[ 539.589707] end_request: I/O error, dev hda, sector 57022227
[ 539.593516] EXT3-fs error (device dm-3): ext3_get_inode_loc: unable to read inode block - inode=1247488, block=4980881
[ 539.602873] end_request: I/O error, dev hda, sector 17175179
[ 539.606645] Buffer I/O error on device dm-3, logical block 0
[ 539.610407] lost page write due to I/O error on dm-3
[ 544.914873] end_request: I/O error, dev hda, sector 51319435
[ 544.918474] ext3_abort called.
[ 544.921915] EXT3-fs error (device dm-3): ext3_journal_start_sb: Detected aborted journal
[ 544.928792] Remounting filesystem read-only
[ 556.440156] end_request: I/O error, dev hda, sector 116167395
[ 556.443581] REISERFS error (device dm-4): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [2 176 0x0 SD]
[ 556.460155] end_request: I/O error, dev hda, sector 116167467
[ 556.463584] REISERFS error (device dm-4): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [2 6986 0x0 SD]
[ 566.605558] end_request: I/O error, dev hda, sector 13415147
[ 566.608968] end_request: I/O error, dev hda, sector 13415155
[ 566.612239] end_request: I/O error, dev hda, sector 13415163
[ 566.615399] end_request: I/O error, dev hda, sector 13415171
[ 566.618564] end_request: I/O error, dev hda, sector 13415147
[ 566.622382] end_request: I/O error, dev hda, sector 13415147
[ 595.166714] end_request: I/O error, dev hda, sector 10465947
[ 595.172973] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=306433, block=1245186
[ 600.147137] end_request: I/O error, dev hda, sector 10465947
[ 600.150448] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=306433, block=1245186
[ 600.156753] end_request: I/O error, dev hda, sector 10465947
[ 600.160832] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=306433, block=1245186
[ 600.167958] end_request: I/O error, dev hda, sector 10465947
[ 600.171741] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=306433, block=1245186
[ 602.571308] end_request: I/O error, dev hda, sector 116167571
[ 602.575052] REISERFS error (device dm-4): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [2 272 0x0 SD]
[ 602.588314] end_request: I/O error, dev hda, sector 116167571
[ 602.592947] REISERFS error (device dm-4): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [2 271 0x0 SD]
[ 602.604732] end_request: I/O error, dev hda, sector 116167363
[ 602.608627] REISERFS error (device dm-4): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [264 6657 0x0 SD]
[ 602.620819] end_request: I/O error, dev hda, sector 116168139
[ 602.624796] REISERFS error (device dm-4): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [2 893 0x0 SD]
[ 602.638679] end_request: I/O error, dev hda, sector 9941995
[ 602.642773] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=290991, block=1179692
[ 602.651031] end_request: I/O error, dev hda, sector 116167363
[ 602.655158] REISERFS error (device dm-4): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [264 5723 0x0 SD]
[ 623.870160] end_request: I/O error, dev hda, sector 10465947
[ 623.876708] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=306433, block=1245186
[ 628.930994] end_request: I/O error, dev hda, sector 10465947
[ 628.934267] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=306433, block=1245186
[ 628.940986] end_request: I/O error, dev hda, sector 10465947
[ 628.944217] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=306433, block=1245186
[ 628.950732] end_request: I/O error, dev hda, sector 10465947
[ 628.953947] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=306433, block=1245186
[ 641.610554] end_request: I/O error, dev hda, sector 117093907
[ 641.610748] Buffer I/O error on device dm-4, logical block 148593
[ 641.610908] lost page write due to I/O error on dm-4
[ 650.480125] end_request: I/O error, dev hda, sector 12300955
[ 650.480343] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=362881, block=1474562
[ 650.569665] end_request: I/O error, dev hda, sector 12300955
[ 650.569897] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=362881, block=1474562
[ 656.620130] end_request: I/O error, dev hda, sector 117093907
[ 656.620324] Buffer I/O error on device dm-4, logical block 148593
[ 656.620484] lost page write due to I/O error on dm-4
[ 661.543724] end_request: I/O error, dev hda, sector 12300955
[ 661.552197] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=362881, block=1474562
[ 663.099138] end_request: I/O error, dev hda, sector 12300955
[ 663.103284] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=362881, block=1474562
[ 663.110596] end_request: I/O error, dev hda, sector 12300955
[ 663.114189] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=362881, block=1474562
[ 663.122196] end_request: I/O error, dev hda, sector 12300955
[ 663.125832] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=362881, block=1474562
[ 664.955009] end_request: I/O error, dev hda, sector 12300955
[ 664.958585] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=362881, block=1474562
[ 664.966715] end_request: I/O error, dev hda, sector 12300955
[ 664.971149] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=362881, block=1474562
[ 664.978654] end_request: I/O error, dev hda, sector 12300955
[ 664.983255] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=362881, block=1474562
[ 668.635161] end_request: I/O error, dev hda, sector 10465947
[ 668.638923] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=306433, block=1245186
[ 668.646586] end_request: I/O error, dev hda, sector 10465947
[ 668.651088] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=306433, block=1245186
[ 668.658695] end_request: I/O error, dev hda, sector 10465947
[ 668.663075] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=306433, block=1245186
[ 682.763155] end_request: I/O error, dev hda, sector 10465947
[ 682.766893] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=306433, block=1245186
[ 821.638356] usb 2-1.3: new full speed USB device using ohci_hcd and address 5
[ 821.860383] usb 2-1.3: New USB device found, idVendor=0930, idProduct=6518
[ 821.863775] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 821.870335] usb 2-1.3: Product: DataTraveler 2.0
[ 821.873611] usb 2-1.3: Manufacturer: Kingston
[ 821.876880] usb 2-1.3: SerialNumber: 28C13A40C190A8E6
[ 821.880596] usb 2-1.3: configuration #1 chosen from 1 choice
[ 821.913822] end_request: I/O error, dev hda, sector 12196299
[ 821.917451] end_request: I/O error, dev hda, sector 12196299
[ 821.921610] end_request: I/O error, dev hda, sector 12196299
[ 924.439207] usb 2-1.3: USB disconnect, address 5
[ 927.618165] usb 2-1.3: new full speed USB device using ohci_hcd and address 6
[ 927.831162] usb 2-1.3: New USB device found, idVendor=0930, idProduct=6518
[ 927.832696] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 927.835727] usb 2-1.3: Product: DataTraveler 2.0
[ 927.837376] usb 2-1.3: Manufacturer: Kingston
[ 927.839060] usb 2-1.3: SerialNumber: 28C13A40C190A8E6
[ 927.841380] usb 2-1.3: configuration #1 chosen from 1 choice
[ 927.881687] end_request: I/O error, dev hda, sector 12196299
[ 927.883709] end_request: I/O error, dev hda, sector 12196299
[ 996.803563] end_request: I/O error, dev hda, sector 3036
[ 996.805695] Buffer I/O error on device hda3, logical block 509
[ 996.807892] end_request: I/O error, dev hda, sector 68572
[ 996.810477] Buffer I/O error on device hda3, logical block 33277
[ 996.812868] end_request: I/O error, dev hda, sector 3036
[ 996.815293] Buffer I/O error on device hda3, logical block 509
[ 996.817826] end_request: I/O error, dev hda, sector 68572
[ 996.820616] Buffer I/O error on device hda3, logical block 33277
[ 996.830381] end_request: I/O error, dev hda, sector 2020
[ 996.833150] Buffer I/O error on device hda3, logical block 1
[ 996.835982] lost page write due to I/O error on hda3
[ 996.838886] EXT2-fs error (device hda3): ext2_readdir: bad page in #2
[ 1001.620115] end_request: I/O error, dev hda, sector 2028
[ 1001.626411] Buffer I/O error on device hda3, logical block 5
[ 1001.629708] lost page write due to I/O error on hda3
[ 1004.548305] end_request: I/O error, dev hda, sector 3036
[ 1004.551585] Buffer I/O error on device hda3, logical block 509
[ 1004.554790] end_request: I/O error, dev hda, sector 68572
[ 1004.558388] Buffer I/O error on device hda3, logical block 33277
[ 1004.577616] end_request: I/O error, dev hda, sector 2020
[ 1004.580805] Buffer I/O error on device hda3, logical block 1
[ 1004.583969] lost page write due to I/O error on hda3
[ 1004.587124] EXT2-fs error (device hda3): ext2_readdir: bad page in #2
[ 1007.188122] end_request: I/O error, dev hda, sector 3036
[ 1007.191640] Buffer I/O error on device hda3, logical block 509
[ 1007.194931] end_request: I/O error, dev hda, sector 68572
[ 1007.198186] Buffer I/O error on device hda3, logical block 33277
[ 1007.210113] end_request: I/O error, dev hda, sector 2020
[ 1007.213374] Buffer I/O error on device hda3, logical block 1
[ 1007.216627] lost page write due to I/O error on hda3
[ 1007.219875] EXT2-fs error (device hda3): ext2_readdir: bad page in #2
[ 1045.964236] ext3_abort called.
[ 1045.967578] EXT3-fs error (device dm-1): ext3_remount: Abort forced by user
[ 1065.046514] ext3_abort called.
[ 1065.049949] EXT3-fs error (device dm-1): ext3_remount: Abort forced by user
[ 1065.059427] ext3_abort called.
[ 1065.062917] EXT3-fs error (device dm-1): ext3_remount: Abort forced by user
[ 1138.870118] end_request: I/O error, dev hda, sector 10465947
[ 1138.873286] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=306433, block=1245186
[ 1147.874122] end_request: I/O error, dev hda, sector 10465947
[ 1147.877365] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=306433, block=1245186
[ 1151.988242] end_request: I/O error, dev hda, sector 10465947
[ 1151.991690] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=306433, block=1245186
[ 1164.719226] end_request: I/O error, dev hda, sector 6273603
[ 1164.724645] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=181334, block=721143
[ 1175.579326] end_request: I/O error, dev hda, sector 13353043
[ 1175.586419] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=395476, block=1606073
[ 1175.596029] end_request: I/O error, dev hda, sector 13353043
[ 1175.599647] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=395476, block=1606073
[ 1182.702517] end_request: I/O error, dev hda, sector 13448387
[ 1182.706045] end_request: I/O error, dev hda, sector 13448395
[ 1182.709469] end_request: I/O error, dev hda, sector 13448403
[ 1182.712860] end_request: I/O error, dev hda, sector 13448411
[ 1182.720115] end_request: I/O error, dev hda, sector 13448387
[ 1182.723533] end_request: I/O error, dev hda, sector 13448387
[ 1219.710328] end_request: I/O error, dev hda, sector 11665483
[ 1219.713738] end_request: I/O error, dev hda, sector 11665491
[ 1219.717028] end_request: I/O error, dev hda, sector 11665499
[ 1219.720252] end_request: I/O error, dev hda, sector 11665507
[ 1219.724041] end_request: I/O error, dev hda, sector 11665483
[ 1219.727243] end_request: I/O error, dev hda, sector 11665483
[ 1224.813634] end_request: I/O error, dev hda, sector 11665483
[ 1224.816829] end_request: I/O error, dev hda, sector 11665483
[ 1226.117609] end_request: I/O error, dev hda, sector 11665483
[ 1226.120982] end_request: I/O error, dev hda, sector 11665483
[ 1226.964969] end_request: I/O error, dev hda, sector 11665483
[ 1226.968035] end_request: I/O error, dev hda, sector 11665483
[ 1236.659700] usb 2-1.3: USB disconnect, address 6
[ 1239.908662] usb 2-1.3: new full speed USB device using ohci_hcd and address 7
[ 1240.121659] usb 2-1.3: New USB device found, idVendor=0930, idProduct=6518
[ 1240.124502] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1240.129933] usb 2-1.3: Product: DataTraveler 2.0
[ 1240.132687] usb 2-1.3: Manufacturer: Kingston
[ 1240.135327] usb 2-1.3: SerialNumber: 28C13A40C190A8E6
[ 1240.138159] usb 2-1.3: configuration #1 chosen from 1 choice
[ 1240.179737] end_request: I/O error, dev hda, sector 12196299
[ 1240.182758] end_request: I/O error, dev hda, sector 12196299
[ 1298.289137] end_request: I/O error, dev hda, sector 10465947
[ 1298.291501] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=306433, block=1245186
[ 1308.119975] end_request: I/O error, dev hda, sector 10465947
[ 1308.121977] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=306433, block=1245186
[ 1373.925868] end_request: I/O error, dev hda, sector 10248979
[ 1373.928710] end_request: I/O error, dev hda, sector 10248987
[ 1373.932248] end_request: I/O error, dev hda, sector 10248995
[ 1373.934904] end_request: I/O error, dev hda, sector 10249003
[ 1373.937432] end_request: I/O error, dev hda, sector 10249011
[ 1373.939882] end_request: I/O error, dev hda, sector 10249019
[ 1373.942301] end_request: I/O error, dev hda, sector 10249027
[ 1373.944657] end_request: I/O error, dev hda, sector 10249035
[ 1373.946946] end_request: I/O error, dev hda, sector 10249043
[ 1373.949169] end_request: I/O error, dev hda, sector 10249051
[ 1373.949178] end_request: I/O error, dev hda, sector 10249059
[ 1373.949186] end_request: I/O error, dev hda, sector 10249067
[ 1373.949194] end_request: I/O error, dev hda, sector 10249075
[ 1373.949201] end_request: I/O error, dev hda, sector 10249083
[ 1373.949208] end_request: I/O error, dev hda, sector 10249091
[ 1373.949215] end_request: I/O error, dev hda, sector 10249099
[ 1373.949222] end_request: I/O error, dev hda, sector 10249107
[ 1373.949229] end_request: I/O error, dev hda, sector 10249115
[ 1373.949236] end_request: I/O error, dev hda, sector 10249123
[ 1373.949243] end_request: I/O error, dev hda, sector 10249131
[ 1373.949250] end_request: I/O error, dev hda, sector 10249139
[ 1373.949361] end_request: I/O error, dev hda, sector 10249099
[ 1387.527157] end_request: I/O error, dev hda, sector 9827155
[ 1387.532621] end_request: I/O error, dev hda, sector 9827155
[ 1387.600391] end_request: I/O error, dev hda, sector 12300955
[ 1387.601853] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=362881, block=1474562
[ 1387.613726] end_request: I/O error, dev hda, sector 9827059
[ 1387.615973] end_request: I/O error, dev hda, sector 12300955
[ 1387.617472] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=362881, block=1474562
[ 1387.621430] end_request: I/O error, dev hda, sector 2274867
[ 1387.623238] end_request: I/O error, dev hda, sector 2274875
[ 1387.625032] end_request: I/O error, dev hda, sector 2274883
[ 1387.626822] end_request: I/O error, dev hda, sector 2274891
[ 1387.628744] end_request: I/O error, dev hda, sector 2274867
[ 1391.608036] end_request: I/O error, dev hda, sector 117093907
[ 1391.612215] Buffer I/O error on device dm-4, logical block 148593
[ 1391.614482] lost page write due to I/O error on dm-4
[ 1461.117615] end_request: I/O error, dev hda, sector 10249099
[ 1483.595980] end_request: I/O error, dev hda, sector 11665483
[ 1483.600025] end_request: I/O error, dev hda, sector 11665483
[ 1564.090515] end_request: I/O error, dev hda, sector 12039595
[ 1564.093623] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=356392, block=1441892
[ 1564.100197] end_request: I/O error, dev hda, sector 12039595
[ 1564.103350] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=356392, block=1441892
[ 1564.109744] end_request: I/O error, dev hda, sector 12039595
[ 1564.112987] EXT3-fs error (device dm-1): ext3_get_inode_loc: unable to read inode block - inode=356392, block=1441892
[ 1584.670563] VFS: Can't find ext3 filesystem on dev hdb5.
[ 1591.240781] VFS: Can't find ext3 filesystem on dev hdb6.
[ 1594.474972] kjournald starting. Commit interval 5 seconds
[ 1594.479356] EXT3 FS on hdb7, internal journal
[ 1594.483906] EXT3-fs: mounted filesystem with ordered data mode.
>
> [ BTW the above bisection points that the problem was introduced
> outside of drivers/ide or that it was introduced earlier that we'd
> initially thought ]
>
> > I have added second hard drive and got new issue. May be this log
> > (dmesg) can tell you something. It is on first known 'bad commit'.
> > 2.6.29.2 can't properly
>
> It tells us that there is some IRQ routing problem... seems like a
> platform or ide-pmac specific problem. Does some earlier kernel work
> OK with this configuration?
I have Debian's 2.6.26, it has same problem. Don't take attention to time, I
caught another bug on Aureal Vortex2, this driver kills kernel completely and
system time too. I am lucky on bugs on this machine.
[477194868.371586] Uniform Multi-Platform E-IDE driver
[477194868.371648] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[477194868.371902] adb: starting probe task...
[477194868.371994] adb: finished probe task...
[477194868.372138] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
[477194869.389956] ide0: Found Apple UniNorth ATA-6 controller, bus ID 3, irq 39
[477194869.390045] Probing IDE interface ide0...
[477194869.678137] hda: IBM-IC35L060AVVA07-0, ATA DISK drive
[477194869.958131] hdb: QUANTUM FIREBALLP LM20.5, ATA DISK drive
[477194870.014152] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[477194870.014325] hda: UDMA/100 mode selected
[477194870.014533] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[477194870.014792] hdb: UDMA/66 mode selected
[477194870.015158] ide0 at 0xf100a000-0xf100a070,0xf100a160 on irq 39
[477194871.033954] ide1: Found Apple KeyLargo ATA-4 controller, bus ID 2, irq 19
[477194871.034039] Probing IDE interface ide1...
[477194871.602152] ide1 at 0xf1006000-0xf1006070,0xf1006160 on irq 19
[477194872.621954] ide2: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 20
[477194872.622034] Probing IDE interface ide2...
[477194873.022132] hde: PHILIPS CDD5101, ATAPI CD/DVD-ROM drive
[477194873.358138] hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[477194873.358517] hde: MWDMA2 mode selected
[477194873.358986] ide2 at 0xf100e000-0xf100e070,0xf100e160 on irq 20
[477194873.359673] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[477194873.359976] ohci_hcd 0001:10:18.0: enabling device (0000 -> 0002)
[477194873.360052] ohci_hcd 0001:10:18.0: OHCI Host Controller
[477194873.360474] ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1
[477194873.360581] ohci_hcd 0001:10:18.0: irq 27, io mem 0x80081000
[477194873.434119] usb usb1: configuration #1 chosen from 1 choice
[477194873.434363] hub 1-0:1.0: USB hub found
[477194873.434435] hub 1-0:1.0: 2 ports detected
[477194873.538660] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[477194873.540998] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[477194873.543333] usb usb1: Product: OHCI Host Controller
[477194873.545636] usb usb1: Manufacturer: Linux 2.6.26-2-powerpc-smp ohci_hcd
[477194873.547962] usb usb1: SerialNumber: 0001:10:18.0
[477194873.550313] ohci_hcd 0001:10:19.0: enabling device (0000 -> 0002)
[477194873.552655] ohci_hcd 0001:10:19.0: OHCI Host Controller
[477194873.555333] ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2
[477194873.557692] ohci_hcd 0001:10:19.0: irq 28, io mem 0x80080000
[477194873.634070] usb usb2: configuration #1 chosen from 1 choice
[477194873.636535] hub 2-0:1.0: USB hub found
[477194873.638834] hub 2-0:1.0: 2 ports detected
[477194873.742460] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[477194873.744780] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[477194873.747109] usb usb2: Product: OHCI Host Controller
[477194873.749418] usb usb2: Manufacturer: Linux 2.6.26-2-powerpc-smp ohci_hcd
[477194873.751762] usb usb2: SerialNumber: 0001:10:19.0
[477194873.770248] mice: PS/2 mouse device common for all mice
[477194873.772918] platform ppc-rtc.0: rtc core: registered ppc_md as rtc0
[477194873.776612] TCP cubic registered
[477194873.779036] NET: Registered protocol family 17
[477194873.781981] registered taskstats version 1
[477194873.784847] input: PMU as /class/input/input1
[477194873.793963] usb 1-1: new low speed USB device using ohci_hcd and address 2
[477194873.802198] platform ppc-rtc.0: hctosys: invalid date/time
[477194873.804636] Freeing unused kernel memory: 236k init
[477194873.968070] usb 1-1: configuration #1 chosen from 1 choice
[477194873.976612] usb 1-1: New USB device found, idVendor=0458, idProduct=002e
[477194873.979066] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[477194873.981456] usb 1-1: Product: NetScroll+ Traveler
[477194873.983818] usb 1-1: Manufacturer: KYE
[477194874.218319] PowerMac i2c bus pmu 2 registered
[477194874.220984] PowerMac i2c bus pmu 1 registered
[477194874.223600] PowerMac i2c bus mac-io 0 registered
[477194874.226120] PowerMac i2c bus uni-n 1 registered
[477194874.228603] PowerMac i2c bus uni-n 0 registered
[477194874.242112] usb 2-1: new full speed USB device using ohci_hcd and address 2
[477194874.407190] usb 2-1: configuration #1 chosen from 1 choice
[477194874.411149] hub 2-1:1.0: USB hub found
[477194874.415076] hub 2-1:1.0: 4 ports detected
[477194874.534293] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608
[477194874.537039] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[477194874.539724] usb 2-1: Product: USB2.0 Hub
[477194874.771003] usb 2-1.1: new full speed USB device using ohci_hcd and address 3
[477194874.887185] usb 2-1.1: configuration #1 chosen from 1 choice
[477194874.889897] Linux agpgart interface v0.103
[477194874.890109] hub 2-1.1:1.0: USB hub found
[477194874.891983] hub 2-1.1:1.0: 4 ports detected
[477194874.899579] agpgart: Detected Apple UniNorth 2 chipset
[477194874.902002] agpgart: configuring for size idx: 8
[477194874.904312] agpgart: AGP aperture is 32M @ 0x0
[477194874.987211] hde: ATAPI 32X DVD-ROM CD-R/RW drive, 8192kB Cache
[477194874.989566] Uniform CD-ROM driver Revision: 3.20
[477194875.006296] usb 2-1.1: New USB device found, idVendor=05e3, idProduct=0608
[477194875.008637] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[477194875.010921] usb 2-1.1: Product: USB2.0 Hub
[477194875.024719] hda: max request size: 128KiB
[477194875.032590] hda: 120103200 sectors (61492 MB) w/1863KiB Cache, CHS=65535/16/63
[477194875.035083] hda: cache flushes supported
[477194875.037456] hda: [mac] hda1 hda2 hda3 hda4
[477194875.048662] hdb: max request size: 128KiB
[477194875.057687] sungem.c:v0.98 8/24/03 David S. Miller (davem@xxxxxxxxxx)
[477194875.065337] hdb: 40132503 sectors (20547 MB) w/1900KiB Cache, CHS=39813/16/63
[477194875.067826] hdb: cache flushes not supported
[477194875.070216] hdb:<7>PHY ID: 2060e1, addr: 0
[477194875.130989] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:ab:d1:a6
[477194875.133278] eth0: Found BCM5421 PHY
[477194875.135709] ohci1394 0002:20:0e.0: enabling device (0000 -> 0002)
[477194875.189908] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[477194875.243002] usb 2-1.2: new low speed USB device using ohci_hcd and address 4
[477194875.362206] usb 2-1.2: configuration #1 chosen from 1 choice
[477194875.366594] usb 2-1.2: New USB device found, idVendor=04d9, idProduct=0022
[477194875.369010] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[477194875.371387] usb 2-1.2: Product: USB Keyboard
[477194875.387102] usbcore: registered new interface driver hiddev
[477194875.395057] input: KYE NetScroll+ Traveler as /class/input/input2
[477194875.430143] input,hidraw0: USB HID v1.10 Mouse [KYE NetScroll+ Traveler] on usb-0001:10:18.0-1
[477194875.443051] input: USB Keyboard as /class/input/input3
[477194875.462050] input,hidraw1: USB HID v1.10 Keyboard [USB Keyboard] on usb-0001:10:19.0-1.2
[477194875.484936] input: USB Keyboard as /class/input/input4
[477194875.502025] input,hidraw2: USB HID v1.10 Device [USB Keyboard] on usb-0001:10:19.0-1.2
[477194875.504573] usbcore: registered new interface driver usbhid
[477194875.507035] usbhid: v2.6:USB HID core driver
[477194876.470402] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000393fffeabd1a6]
[477194877.526334] eth0: Link is up at 100 Mbps, full-duplex.
[477194895.065957] ide-pmac lost interrupt, dma status: 8480
[477194895.068535] hdb: lost interrupt
[477194895.070952] hdb: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
[477194895.073444] ide: failed opcode was: unknown
[477194895.076053] hda: DMA disabled
[477194895.078504] hdb: DMA disabled
[477194895.209948] ide0: reset: success
[477194895.430619] hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 >
>
> > initialize it too (got lost interrupt and disable dma).
> >
> > [ 1.113901] Uniform Multi-Platform E-IDE driver
> > [ 1.120304] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
> > [ 1.123139] adb: starting probe task...
> > [ 1.125609] adb: finished probe task...
> > [ 2.147653] ide-pmac: Found Apple UniNorth ATA-6 controller
> > (PCI), bus ID 3, irq 39 [ 2.152331] Probing IDE interface ide0...
> > [ 2.457825] hda: IBM-IC35L060AVVA07-0, ATA DISK drive
> > [ 2.817641] hdb: QUANTUM FIREBALLP LM20.5, ATA DISK drive
> > [ 66.660447] hda: host max PIO4 wanted PIO255(auto-tune) selected
> > PIO4 [ 66.660624] hda: UDMA/100 mode selected
> > [ 66.663170] hdb: host max PIO4 wanted PIO255(auto-tune) selected
> > PIO4 [ 66.663415] hdb: UDMA/66 mode selected
> > [ 66.666108] ide0 at 0xf1012000-0xf1012070,0xf1012160 on irq 39
> > [ 67.697640] ide-pmac: Found Apple KeyLargo ATA-4 controller
> > (macio), bus ID 2, irq 19 [ 67.702368] Probing IDE interface
> > ide1... [ 131.867685] ide1 at 0xf100e000-0xf100e070,0xf100e160 on
> > irq 19 [ 132.897559] ide-pmac: Found Apple KeyLargo ATA-3
> > controller (macio), bus ID 0, irq 20 [ 132.902273] Probing IDE
> > interface ide2... [ 196.898053] hde: PHILIPS CDD5101, ATAPI
> > CD/DVD-ROM drive [ 260.980668] hde: host max PIO4 wanted
> > PIO255(auto-tune) selected PIO4 [ 260.981049] hde: MWDMA2 mode
> > selected [ 260.984269] ide2 at 0xf1016000-0xf1016070,0xf1016160 on
> > irq 20 [ 260.989418] ide-gd driver 1.18
> > [ 260.991880] hda: max request size: 128KiB
> > [ 261.039649] hda: 120103200 sectors (61492 MB) w/1863KiB Cache,
> > CHS=65535/16/63 [ 261.044690] hda: cache flushes supported
> > [ 261.047292] hda: [mac] hda1 hda2 hda3 hda4
> > [ 261.060150] hdb: max request size: 128KiB
> > [ 261.089788] hdb: 40132503 sectors (20547 MB) w/1900KiB Cache,
> > CHS=39813/16/63 [ 261.092287] hdb: cache flushes not supported
> > [ 261.094754] hdb:<3>ide-pmac lost interrupt, dma status: 8480
> > [ 281.089717] hdb: lost interrupt
> > [ 281.092085] hdb: dma_intr: status=0x58 { DriveReady SeekComplete
> > DataRequest } [ 281.097038] ide: failed opcode was: unknown
> > [ 281.101900] hda: DMA disabled
> > [ 281.104247] hdb: DMA disabled
> > [ 281.187260] ide0: reset: success
> > [ 281.230368] hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 >
> > [ 281.285486] ide-cd driver 5.00
> > [ 281.297481] ide-cd: hde: ATAPI 32X DVD-ROM CD-R/RW drive, 8192kB
> > Cache [ 281.299687] Uniform CD-ROM driver Revision: 3.20
>
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
