Hello, I wrote:
True. However it should be possible to handle it correctly by
adding
the
DMA quirk to the respective host drivers (seems to be
via82cxxx.c
in case of
IEI PCISA-C3/EDEN).
Yeah, this seems a viable approach...
Kirill, could you please look into adding such quirk to
via82cxxx
instead?
[ It seems the best place to add it would be via_init_one()
as we
could just
No, not really -- the issue is not at all as simple as this patch
tried to present it. Looking at its "Quick Startup Reference"
(http://f.ipc2u.ru/files/add/doc/496/M_PCISA-C800EV_ENG.pdf), the
EPIC
board has *two* normal IDE connectors in addition to the CF slot
(connected to the secondary port -- and it seems possible that a
hard drive can be connected to the same port as CF), so the right
place seems to rather be in [mu]dma_filter() methods -- and the
decision should be strictly based on the drive type indicating
CF,
i.e. by calling ata_id_is_cfa().
I have tried my old Trancend 64Mb, RamStar 521Mb and NCP 64Mb cards.
My old cards returned right id[ATA_ID_CONFIG] = 0x848A.
But I have to use Kingston CF Card 1Gb 2008.
ata_id_is_cfa() returns 0 for it and
id[ATA_ID_MAJOR_VER] = 0
That turned to be the requirement of the CF spec... :-/
id[ATA_ID_CONFIG] = 0x044A
CF 4.x lists this value as "CF preferred altrernate", along with 0x0040.
That seems non-standard CF as ATA specifies that it must have 0x848A
there.
I have only CF+ specification revision 2.0, but I've found in wiki:
Try googling for cfspc_41.pdf (and other versions), you'll be
surprised in a good way. ;-)
(http://en.wikipedia.org/wiki/CompactFlash#CF.2B_specification_revisions
) "... While the current revision 4.1 from 2004 works only in ATA
mode,
..."
So I have reached an impasse. How to identify modern CF cards?
Hm, I should consult the specs...
ATA/PI-7 rev. 4b has this in 4.10:
Devices reporting the value 848Ah in IDENTIFY DEVICE data word 0 or
devices
having bit 2 of IDENTIFY DEVICE data word 83 set to one shall
support the
CFA feature Set. If the CFA feature set is implemented, all five
commands
shall be implemented.
id[ATA_ID_COMMAND_SET_2] = 0 /* For my Kingston 1Gb CF card, kernel
v2.6.28.1 */
Then I guess we need a new quirk. :-/
BTW, CF 4.x says that the drive reporting word 0 bits 12:15 as 0 "is
required to support for the CFA command set and report that in bit 2 of
Word 83". So thank Kingston for being CF incompatible. :-)
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
