On Tue 2009-01-20 00:03:05, Alan Cox wrote: > > I guess I'm confused. I tried: > > You want CONFIG_IDE = n, CONFIG_ATA_SFF = y, CONFIG_ATA_PIIX = y Thanks. With those options, cdrom moved from hda to sr0, and is correctly unregistered when undocking. Unfortunately, it is not correctly re-registered when I insert machine back into the dock :-(... so something is still not right in docking area. Pavel coda: Unexpected interruption. Failure of coda_cnode_make for root: error -4 ata5.00: disabled ata5.00: detaching (SCSI 4:0:0:0) sr 4:0:0:0: rejecting I/O to dead device sr 4:0:0:0: rejecting I/O to dead device ACPI: \_SB_.GDCK - undocking usb usb1: usb resume ehci_hcd 0000:00:1d.7: resume root hub hub 1-0:1.0: hub_resume ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001002 POWER sig=se0 CSC hub 1-0:1.0: port 6: status 0100 change 0001 hub 1-0:1.0: state 7 ports 8 chg 0040 evt fe00 hub 1-0:1.0: port 6, status 0100, change 0000, 12 Mb/s usb 1-6: USB disconnect, address 2 usb 1-6: unregistering device usb 1-6: usb_disable_device nuking all URBs usb 1-6: unregistering interface 1-6:1.0 usb 1-6:1.0: uevent usb 1-6: uevent hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub usb usb1: usb resume ehci_hcd 0000:00:1d.7: resume root hub hub 1-0:1.0: hub_resume ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 6: status 0501 change 0001 hub 1-0:1.0: state 7 ports 8 chg 0040 evt fe00 hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s ehci_hcd 0000:00:1d.7: port 6 high speed ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT usb 1-6: new high speed USB device using ehci_hcd and address 5 ehci_hcd 0000:00:1d.7: port 6 high speed ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT usb 1-6: New USB device found, idVendor=17ef, idProduct=1000 usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-6: uevent usb 1-6: usb_probe_device usb 1-6: configuration #1 chosen from 1 choice usb 1-6: adding 1-6:1.0 (config #1, interface 0) usb 1-6:1.0: uevent hub 1-6:1.0: usb_probe_interface hub 1-6:1.0: usb_probe_interface - got id hub 1-6:1.0: USB hub found hub 1-6:1.0: 4 ports detected hub 1-6:1.0: standalone hub hub 1-6:1.0: individual port power switching hub 1-6:1.0: individual port over-current protection hub 1-6:1.0: TT per port hub 1-6:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-6:1.0: power on to power good time: 100ms hub 1-6:1.0: local power source is good hub 1-6:1.0: enabling power on all ports /data/l/linux/drivers/usb/core/inode.c: creating file '005' usb 1-6: link qh256-0001/f6238080 start 255 [1/0 us] hub 1-6:1.0: state 7 ports 4 chg 0000 evt 0000 hub 1-6:1.0: hub_suspend usb 1-6: unlink qh256-0001/f6238080 start 255 [1/0 us] usb 1-6: usb auto-suspend hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
