From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Subject: [PATCH] ide: move xfer mode tuning code to ide-xfer-mode.c
* Move xfer mode tuning code to ide-xfer-mode.c.
* Add CONFIG_IDE_XFER_MODE config option to be selected by host drivers
that support xfer mode tuning.
* Add CONFIG_IDE_XFER_MODE=n static inline versions of ide_set_pio()
and ide_set_xfer_rate().
* Make IDE_TIMINGS and BLK_DEV_IDEDMA config options select IDE_XFER_MODE,
also add explicit selects for few host drivers that need it.
* Build/link ide-xfer-mode.o and ide-pio-blacklist.o (it is needed only
by ide-xfer-mode.o) only if CONFIG_IDE_XFER_MODE=y.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ide/Kconfig | 8 +
drivers/ide/Makefile | 4
drivers/ide/ide-lib.c | 240 ------------------------------------------
drivers/ide/ide-xfer-mode.c | 246 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/ide.h | 12 +-
5 files changed, 263 insertions(+), 247 deletions(-)
Index: b/drivers/ide/Kconfig
===================================================================
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -56,8 +56,12 @@ if IDE
comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"
+config IDE_XFER_MODE
+ bool
+
config IDE_TIMINGS
bool
+ select IDE_XFER_MODE
config IDE_ATAPI
bool
@@ -698,6 +702,7 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST
config BLK_DEV_IDE_AU1XXX
bool "IDE for AMD Alchemy Au1200"
depends on SOC_AU1200
+ select IDE_XFER_MODE
choice
prompt "IDE Mode for AMD Alchemy Au1200"
default CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
@@ -866,6 +871,7 @@ config BLK_DEV_ALI14XX
config BLK_DEV_DTC2278
tristate "DTC-2278 support"
+ select IDE_XFER_MODE
select IDE_LEGACY
help
This driver is enabled at runtime using the "dtc2278.probe" kernel
@@ -897,6 +903,7 @@ config BLK_DEV_QD65XX
config BLK_DEV_UMC8672
tristate "UMC-8672 support"
+ select IDE_XFER_MODE
select IDE_LEGACY
help
This driver is enabled at runtime using the "umc8672.probe" kernel
@@ -910,5 +917,6 @@ endif
config BLK_DEV_IDEDMA
def_bool BLK_DEV_IDEDMA_SFF || \
BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ select IDE_XFER_MODE
endif # IDE
Index: b/drivers/ide/Makefile
===================================================================
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -5,10 +5,10 @@
EXTRA_CFLAGS += -Idrivers/ide
ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \
- ide-taskfile.o ide-pm.o ide-park.o ide-pio-blacklist.o \
- ide-sysfs.o ide-devsets.o
+ ide-taskfile.o ide-pm.o ide-park.o ide-sysfs.o ide-devsets.o
# core IDE code
+ide-core-$(CONFIG_IDE_XFER_MODE) += ide-pio-blacklist.o ide-xfer-mode.o
ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o
ide-core-$(CONFIG_IDE_ATAPI) += ide-atapi.o
ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o
Index: b/drivers/ide/ide-lib.c
===================================================================
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -5,163 +5,6 @@
#include <linux/ide.h>
#include <linux/bitops.h>
-static const char *udma_str[] =
- { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44",
- "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" };
-static const char *mwdma_str[] =
- { "MWDMA0", "MWDMA1", "MWDMA2" };
-static const char *swdma_str[] =
- { "SWDMA0", "SWDMA1", "SWDMA2" };
-static const char *pio_str[] =
- { "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5" };
-
-/**
- * ide_xfer_verbose - return IDE mode names
- * @mode: transfer mode
- *
- * Returns a constant string giving the name of the mode
- * requested.
- */
-
-const char *ide_xfer_verbose(u8 mode)
-{
- const char *s;
- u8 i = mode & 0xf;
-
- if (mode >= XFER_UDMA_0 && mode <= XFER_UDMA_7)
- s = udma_str[i];
- else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_2)
- s = mwdma_str[i];
- else if (mode >= XFER_SW_DMA_0 && mode <= XFER_SW_DMA_2)
- s = swdma_str[i];
- else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_5)
- s = pio_str[i & 0x7];
- else if (mode == XFER_PIO_SLOW)
- s = "PIO SLOW";
- else
- s = "XFER ERROR";
-
- return s;
-}
-EXPORT_SYMBOL(ide_xfer_verbose);
-
-/**
- * ide_rate_filter - filter transfer mode
- * @drive: IDE device
- * @speed: desired speed
- *
- * Given the available transfer modes this function returns
- * the best available speed at or below the speed requested.
- *
- * TODO: check device PIO capabilities
- */
-
-static u8 ide_rate_filter(ide_drive_t *drive, u8 speed)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 mode = ide_find_dma_mode(drive, speed);
-
- if (mode == 0) {
- if (hwif->pio_mask)
- mode = fls(hwif->pio_mask) - 1 + XFER_PIO_0;
- else
- mode = XFER_PIO_4;
- }
-
-/* printk("%s: mode 0x%02x, speed 0x%02x\n", __func__, mode, speed); */
-
- return min(speed, mode);
-}
-
-/**
- * ide_get_best_pio_mode - get PIO mode from drive
- * @drive: drive to consider
- * @mode_wanted: preferred mode
- * @max_mode: highest allowed mode
- *
- * This routine returns the recommended PIO settings for a given drive,
- * based on the drive->id information and the ide_pio_blacklist[].
- *
- * Drive PIO mode is auto-selected if 255 is passed as mode_wanted.
- * This is used by most chipset support modules when "auto-tuning".
- */
-
-u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
-{
- u16 *id = drive->id;
- int pio_mode = -1, overridden = 0;
-
- if (mode_wanted != 255)
- return min_t(u8, mode_wanted, max_mode);
-
- if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0)
- pio_mode = ide_scan_pio_blacklist((char *)&id[ATA_ID_PROD]);
-
- if (pio_mode != -1) {
- printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name);
- } else {
- pio_mode = id[ATA_ID_OLD_PIO_MODES] >> 8;
- if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */
- pio_mode = 2;
- overridden = 1;
- }
-
- if (id[ATA_ID_FIELD_VALID] & 2) { /* ATA2? */
- if (ata_id_has_iordy(id)) {
- if (id[ATA_ID_PIO_MODES] & 7) {
- overridden = 0;
- if (id[ATA_ID_PIO_MODES] & 4)
- pio_mode = 5;
- else if (id[ATA_ID_PIO_MODES] & 2)
- pio_mode = 4;
- else
- pio_mode = 3;
- }
- }
- }
-
- if (overridden)
- printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n",
- drive->name);
- }
-
- if (pio_mode > max_mode)
- pio_mode = max_mode;
-
- return pio_mode;
-}
-EXPORT_SYMBOL_GPL(ide_get_best_pio_mode);
-
-/* req_pio == "255" for auto-tune */
-void ide_set_pio(ide_drive_t *drive, u8 req_pio)
-{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_port_ops *port_ops = hwif->port_ops;
- u8 host_pio, pio;
-
- if (port_ops == NULL || port_ops->set_pio_mode == NULL ||
- (hwif->host_flags & IDE_HFLAG_NO_SET_MODE))
- return;
-
- BUG_ON(hwif->pio_mask == 0x00);
-
- host_pio = fls(hwif->pio_mask) - 1;
-
- pio = ide_get_best_pio_mode(drive, req_pio, host_pio);
-
- /*
- * TODO:
- * - report device max PIO mode
- * - check req_pio != 255 against device max PIO mode
- */
- printk(KERN_DEBUG "%s: host max PIO%d wanted PIO%d%s selected PIO%d\n",
- drive->name, host_pio, req_pio,
- req_pio == 255 ? "(auto-tune)" : "", pio);
-
- (void)ide_set_pio_mode(drive, XFER_PIO_0 + pio);
-}
-EXPORT_SYMBOL_GPL(ide_set_pio);
-
/**
* ide_toggle_bounce - handle bounce buffering
* @drive: drive to update
@@ -188,89 +31,6 @@ void ide_toggle_bounce(ide_drive_t *driv
blk_queue_bounce_limit(drive->queue, addr);
}
-int ide_set_pio_mode(ide_drive_t *drive, const u8 mode)
-{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_port_ops *port_ops = hwif->port_ops;
-
- if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)
- return 0;
-
- if (port_ops == NULL || port_ops->set_pio_mode == NULL)
- return -1;
-
- /*
- * TODO: temporary hack for some legacy host drivers that didn't
- * set transfer mode on the device in ->set_pio_mode method...
- */
- if (port_ops->set_dma_mode == NULL) {
- port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
- return 0;
- }
-
- if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
- if (ide_config_drive_speed(drive, mode))
- return -1;
- port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
- return 0;
- } else {
- port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
- return ide_config_drive_speed(drive, mode);
- }
-}
-
-int ide_set_dma_mode(ide_drive_t *drive, const u8 mode)
-{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_port_ops *port_ops = hwif->port_ops;
-
- if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)
- return 0;
-
- if (port_ops == NULL || port_ops->set_dma_mode == NULL)
- return -1;
-
- if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
- if (ide_config_drive_speed(drive, mode))
- return -1;
- port_ops->set_dma_mode(drive, mode);
- return 0;
- } else {
- port_ops->set_dma_mode(drive, mode);
- return ide_config_drive_speed(drive, mode);
- }
-}
-EXPORT_SYMBOL_GPL(ide_set_dma_mode);
-
-/**
- * ide_set_xfer_rate - set transfer rate
- * @drive: drive to set
- * @rate: speed to attempt to set
- *
- * General helper for setting the speed of an IDE device. This
- * function knows about user enforced limits from the configuration
- * which ->set_pio_mode/->set_dma_mode does not.
- */
-
-int ide_set_xfer_rate(ide_drive_t *drive, u8 rate)
-{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_port_ops *port_ops = hwif->port_ops;
-
- if (port_ops == NULL || port_ops->set_dma_mode == NULL ||
- (hwif->host_flags & IDE_HFLAG_NO_SET_MODE))
- return -1;
-
- rate = ide_rate_filter(drive, rate);
-
- BUG_ON(rate < XFER_PIO_0);
-
- if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5)
- return ide_set_pio_mode(drive, rate);
-
- return ide_set_dma_mode(drive, rate);
-}
-
static void ide_dump_opcode(ide_drive_t *drive)
{
struct request *rq = drive->hwif->rq;
Index: b/drivers/ide/ide-xfer-mode.c
===================================================================
--- /dev/null
+++ b/drivers/ide/ide-xfer-mode.c
@@ -0,0 +1,246 @@
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/ide.h>
+#include <linux/bitops.h>
+
+static const char *udma_str[] =
+ { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44",
+ "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" };
+static const char *mwdma_str[] =
+ { "MWDMA0", "MWDMA1", "MWDMA2" };
+static const char *swdma_str[] =
+ { "SWDMA0", "SWDMA1", "SWDMA2" };
+static const char *pio_str[] =
+ { "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5" };
+
+/**
+ * ide_xfer_verbose - return IDE mode names
+ * @mode: transfer mode
+ *
+ * Returns a constant string giving the name of the mode
+ * requested.
+ */
+
+const char *ide_xfer_verbose(u8 mode)
+{
+ const char *s;
+ u8 i = mode & 0xf;
+
+ if (mode >= XFER_UDMA_0 && mode <= XFER_UDMA_7)
+ s = udma_str[i];
+ else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_2)
+ s = mwdma_str[i];
+ else if (mode >= XFER_SW_DMA_0 && mode <= XFER_SW_DMA_2)
+ s = swdma_str[i];
+ else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_5)
+ s = pio_str[i & 0x7];
+ else if (mode == XFER_PIO_SLOW)
+ s = "PIO SLOW";
+ else
+ s = "XFER ERROR";
+
+ return s;
+}
+EXPORT_SYMBOL(ide_xfer_verbose);
+
+/**
+ * ide_get_best_pio_mode - get PIO mode from drive
+ * @drive: drive to consider
+ * @mode_wanted: preferred mode
+ * @max_mode: highest allowed mode
+ *
+ * This routine returns the recommended PIO settings for a given drive,
+ * based on the drive->id information and the ide_pio_blacklist[].
+ *
+ * Drive PIO mode is auto-selected if 255 is passed as mode_wanted.
+ * This is used by most chipset support modules when "auto-tuning".
+ */
+
+u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
+{
+ u16 *id = drive->id;
+ int pio_mode = -1, overridden = 0;
+
+ if (mode_wanted != 255)
+ return min_t(u8, mode_wanted, max_mode);
+
+ if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0)
+ pio_mode = ide_scan_pio_blacklist((char *)&id[ATA_ID_PROD]);
+
+ if (pio_mode != -1) {
+ printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name);
+ } else {
+ pio_mode = id[ATA_ID_OLD_PIO_MODES] >> 8;
+ if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */
+ pio_mode = 2;
+ overridden = 1;
+ }
+
+ if (id[ATA_ID_FIELD_VALID] & 2) { /* ATA2? */
+ if (ata_id_has_iordy(id)) {
+ if (id[ATA_ID_PIO_MODES] & 7) {
+ overridden = 0;
+ if (id[ATA_ID_PIO_MODES] & 4)
+ pio_mode = 5;
+ else if (id[ATA_ID_PIO_MODES] & 2)
+ pio_mode = 4;
+ else
+ pio_mode = 3;
+ }
+ }
+ }
+
+ if (overridden)
+ printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n",
+ drive->name);
+ }
+
+ if (pio_mode > max_mode)
+ pio_mode = max_mode;
+
+ return pio_mode;
+}
+EXPORT_SYMBOL_GPL(ide_get_best_pio_mode);
+
+int ide_set_pio_mode(ide_drive_t *drive, const u8 mode)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ const struct ide_port_ops *port_ops = hwif->port_ops;
+
+ if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)
+ return 0;
+
+ if (port_ops == NULL || port_ops->set_pio_mode == NULL)
+ return -1;
+
+ /*
+ * TODO: temporary hack for some legacy host drivers that didn't
+ * set transfer mode on the device in ->set_pio_mode method...
+ */
+ if (port_ops->set_dma_mode == NULL) {
+ port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
+ return 0;
+ }
+
+ if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
+ if (ide_config_drive_speed(drive, mode))
+ return -1;
+ port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
+ return 0;
+ } else {
+ port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
+ return ide_config_drive_speed(drive, mode);
+ }
+}
+
+int ide_set_dma_mode(ide_drive_t *drive, const u8 mode)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ const struct ide_port_ops *port_ops = hwif->port_ops;
+
+ if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)
+ return 0;
+
+ if (port_ops == NULL || port_ops->set_dma_mode == NULL)
+ return -1;
+
+ if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
+ if (ide_config_drive_speed(drive, mode))
+ return -1;
+ port_ops->set_dma_mode(drive, mode);
+ return 0;
+ } else {
+ port_ops->set_dma_mode(drive, mode);
+ return ide_config_drive_speed(drive, mode);
+ }
+}
+EXPORT_SYMBOL_GPL(ide_set_dma_mode);
+
+/* req_pio == "255" for auto-tune */
+void ide_set_pio(ide_drive_t *drive, u8 req_pio)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ const struct ide_port_ops *port_ops = hwif->port_ops;
+ u8 host_pio, pio;
+
+ if (port_ops == NULL || port_ops->set_pio_mode == NULL ||
+ (hwif->host_flags & IDE_HFLAG_NO_SET_MODE))
+ return;
+
+ BUG_ON(hwif->pio_mask == 0x00);
+
+ host_pio = fls(hwif->pio_mask) - 1;
+
+ pio = ide_get_best_pio_mode(drive, req_pio, host_pio);
+
+ /*
+ * TODO:
+ * - report device max PIO mode
+ * - check req_pio != 255 against device max PIO mode
+ */
+ printk(KERN_DEBUG "%s: host max PIO%d wanted PIO%d%s selected PIO%d\n",
+ drive->name, host_pio, req_pio,
+ req_pio == 255 ? "(auto-tune)" : "", pio);
+
+ (void)ide_set_pio_mode(drive, XFER_PIO_0 + pio);
+}
+EXPORT_SYMBOL_GPL(ide_set_pio);
+
+/**
+ * ide_rate_filter - filter transfer mode
+ * @drive: IDE device
+ * @speed: desired speed
+ *
+ * Given the available transfer modes this function returns
+ * the best available speed at or below the speed requested.
+ *
+ * TODO: check device PIO capabilities
+ */
+
+static u8 ide_rate_filter(ide_drive_t *drive, u8 speed)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 mode = ide_find_dma_mode(drive, speed);
+
+ if (mode == 0) {
+ if (hwif->pio_mask)
+ mode = fls(hwif->pio_mask) - 1 + XFER_PIO_0;
+ else
+ mode = XFER_PIO_4;
+ }
+
+/* printk("%s: mode 0x%02x, speed 0x%02x\n", __func__, mode, speed); */
+
+ return min(speed, mode);
+}
+
+/**
+ * ide_set_xfer_rate - set transfer rate
+ * @drive: drive to set
+ * @rate: speed to attempt to set
+ *
+ * General helper for setting the speed of an IDE device. This
+ * function knows about user enforced limits from the configuration
+ * which ->set_pio_mode/->set_dma_mode does not.
+ */
+
+int ide_set_xfer_rate(ide_drive_t *drive, u8 rate)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ const struct ide_port_ops *port_ops = hwif->port_ops;
+
+ if (port_ops == NULL || port_ops->set_dma_mode == NULL ||
+ (hwif->host_flags & IDE_HFLAG_NO_SET_MODE))
+ return -1;
+
+ rate = ide_rate_filter(drive, rate);
+
+ BUG_ON(rate < XFER_PIO_0);
+
+ if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5)
+ return ide_set_pio_mode(drive, rate);
+
+ return ide_set_dma_mode(drive, rate);
+}
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1529,9 +1529,7 @@ static inline void ide_set_hwifdata (ide
hwif->hwif_data = data;
}
-const char *ide_xfer_verbose(u8 mode);
extern void ide_toggle_bounce(ide_drive_t *drive, int on);
-extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
u64 ide_get_lba_addr(struct ide_taskfile *, int);
u8 ide_dump_status(ide_drive_t *, const char *, u8);
@@ -1570,14 +1568,18 @@ void ide_timing_merge(struct ide_timing
struct ide_timing *, unsigned int);
int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
+#ifdef CONFIG_IDE_XFER_MODE
int ide_scan_pio_blacklist(char *);
-
+const char *ide_xfer_verbose(u8);
u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
-
int ide_set_pio_mode(ide_drive_t *, u8);
int ide_set_dma_mode(ide_drive_t *, u8);
-
void ide_set_pio(ide_drive_t *, u8);
+int ide_set_xfer_rate(ide_drive_t *, u8);
+#else
+static inline void ide_set_pio(ide_drive_t *drive, u8 pio) { ; }
+static inline int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) { return -1; }
+#endif
static inline void ide_set_max_pio(ide_drive_t *drive)
{
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
