Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> > Seems like ppc people are either very busy or don't care...  Oh well...

Very busy will do it :-) Among others, having a second child is a hit on
the hacking time !

In any case, I think we should contemplate removing the config option
alltogether and make DMA support built unconditionally to simplify the
mess, don't you think ?

Cheers,
Ben.

> > From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
> > Subject: [PATCH] ide: build-fix for CONFIG_BLK_DEV_IDEDMA_PMAC=n
> > 
> > IDE pmac host driver build fails with CONFIG_BLK_DEV_IDEDMA_PMAC=n
> > as reported by Kamalesh:
> > 
> > > drivers/ide/pmac.c: In function 'pmac_ide_set_pio_mode':
> > > drivers/ide/pmac.c:527: error: implicit declaration of function 'kauai_lookup_timing'
> > > drivers/ide/pmac.c:527: error: 'shasta_pio_timings' undeclared (first use in this function)
> > > drivers/ide/pmac.c:527: error: (Each undeclared identifier is reported only once
> > > drivers/ide/pmac.c:527: error: for each function it appears in.)
> > > drivers/ide/pmac.c:534: error: 'kauai_pio_timings' undeclared (first use in this function)
> > > drivers/ide/pmac.c: In function 'pmac_ide_do_resume':
> > > drivers/ide/pmac.c:914: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
> > > drivers/ide/pmac.c: At top level:
> > > drivers/ide/pmac.c:1007: error: 'pmac_ide_init_dma' undeclared here (not in a function)
> > > drivers/ide/pmac.c: In function 'pmac_ide_setup_device':
> > > drivers/ide/pmac.c:1107: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
> > > drivers/ide/pmac.c: In function 'pmac_ide_macio_attach':
> > > drivers/ide/pmac.c:1209: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
> > > drivers/ide/pmac.c:1210: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
> > > make[2]: *** [drivers/ide/pmac.o] Error 1
> > 
> > Fix it by removing the superfluous config option.
> 
> Thanks for the patch, it fixes the build failure.
> > 
> > Reported-by: Kamalesh Babulal <kamalesh@xxxxxxxxxxxxxxxxxx>
> > Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
> > Cc: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
> > Cc: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
> > Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
> > ---
> >  drivers/ide/Kconfig |   14 +++-----------
> >  drivers/ide/pmac.c  |   30 +++---------------------------
> >  2 files changed, 6 insertions(+), 38 deletions(-)
> > 
> > Index: b/drivers/ide/Kconfig
> > ===================================================================
> > --- a/drivers/ide/Kconfig
> > +++ b/drivers/ide/Kconfig
> > @@ -655,10 +655,12 @@ config BLK_DEV_CELLEB
> >  
> >  endif
> >  
> > +# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
> >  config BLK_DEV_IDE_PMAC
> >  	tristate "PowerMac on-board IDE support"
> >  	depends on PPC_PMAC && IDE=y
> >  	select IDE_TIMINGS
> > +	select BLK_DEV_IDEDMA_PCI
> >  	help
> >  	  This driver provides support for the on-board IDE controller on
> >  	  most of the recent Apple Power Macintoshes and PowerBooks.
> > @@ -675,16 +677,6 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST
> >  	  CD-ROM on hda. This option changes this to more natural hda for
> >  	  hard disk and hdc for CD-ROM.
> >  
> > -config BLK_DEV_IDEDMA_PMAC
> > -	bool "PowerMac IDE DMA support"
> > -	depends on BLK_DEV_IDE_PMAC
> > -	select BLK_DEV_IDEDMA_PCI
> > -	help
> > -	  This option allows the driver for the on-board IDE controller on
> > -	  Power Macintoshes and PowerBooks to use DMA (direct memory access)
> > -	  to transfer data to and from memory.  Saying Y is safe and improves
> > -	  performance.
> > -
> >  config BLK_DEV_IDE_AU1XXX
> >         bool "IDE for AMD Alchemy Au1200"
> >         depends on SOC_AU1200
> > @@ -903,7 +895,7 @@ config BLK_DEV_UMC8672
> >  endif
> >  
> >  config BLK_DEV_IDEDMA
> > -	def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \
> > +	def_bool BLK_DEV_IDEDMA_SFF || \
> >  		 BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
> >  
> >  endif # IDE
> > Index: b/drivers/ide/pmac.c
> > ===================================================================
> > --- a/drivers/ide/pmac.c
> > +++ b/drivers/ide/pmac.c
> > @@ -66,7 +66,6 @@ typedef struct pmac_ide_hwif {
> >  	struct macio_dev		*mdev;
> >  	u32				timings[4];
> >  	volatile u32 __iomem *		*kauai_fcr;
> > -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> >  	/* Those fields are duplicating what is in hwif. We currently
> >  	 * can't use the hwif ones because of some assumptions that are
> >  	 * beeing done by the generic code about the kind of dma controller
> > @@ -74,8 +73,6 @@ typedef struct pmac_ide_hwif {
> >  	 */
> >  	volatile struct dbdma_regs __iomem *	dma_regs;
> >  	struct dbdma_cmd*		dma_table_cpu;
> > -#endif
> > -	
> >  } pmac_ide_hwif_t;
> >  
> >  enum {
> > @@ -222,8 +219,6 @@ static const char* model_name[] = {
> >  #define KAUAI_FCR_UATA_RESET_N		0x00000002
> >  #define KAUAI_FCR_UATA_ENABLE		0x00000001
> >  
> > -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> > -
> >  /* Rounded Multiword DMA timings
> >   * 
> >   * I gave up finding a generic formula for all controller
> > @@ -413,8 +408,6 @@ static int pmac_ide_build_dmatable(ide_d
> >  static void pmac_ide_selectproc(ide_drive_t *drive);
> >  static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
> >  
> > -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
> > -
> >  #define PMAC_IDE_REG(x) \
> >  	((void __iomem *)((drive)->hwif->io_ports.data_addr + (x)))
> >  
> > @@ -584,8 +577,6 @@ pmac_ide_set_pio_mode(ide_drive_t *drive
> >  	pmac_ide_do_update_timings(drive);
> >  }
> >  
> > -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> > -
> >  /*
> >   * Calculate KeyLargo ATA/66 UDMA timings
> >   */
> > @@ -786,7 +777,6 @@ set_timings_mdma(ide_drive_t *drive, int
> >  		drive->name, speed & 0xf,  *timings);
> >  #endif	
> >  }
> > -#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
> >  
> >  static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
> >  {
> > @@ -804,7 +794,6 @@ static void pmac_ide_set_dma_mode(ide_dr
> >  	tl[0] = *timings;
> >  	tl[1] = *timings2;
> >  
> > -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> >  	if (speed >= XFER_UDMA_0) {
> >  		if (pmif->kind == controller_kl_ata4)
> >  			ret = set_timings_udma_ata4(&tl[0], speed);
> > @@ -817,7 +806,7 @@ static void pmac_ide_set_dma_mode(ide_dr
> >  			ret = -1;
> >  	} else
> >  		set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
> > -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
> > +
> >  	if (ret)
> >  		return;
> >  
> > @@ -1008,9 +997,7 @@ static const struct ide_port_info pmac_p
> >  	.chipset		= ide_pmac,
> >  	.tp_ops			= &pmac_tp_ops,
> >  	.port_ops		= &pmac_ide_port_ops,
> > -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> >  	.dma_ops		= &pmac_dma_ops,
> > -#endif
> >  	.host_flags		= IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
> >  				  IDE_HFLAG_POST_SET_MODE |
> >  				  IDE_HFLAG_MMIO |
> > @@ -1182,7 +1169,7 @@ pmac_ide_macio_attach(struct macio_dev *
> >  	pmif->regbase = regbase;
> >  	pmif->irq = irq;
> >  	pmif->kauai_fcr = NULL;
> > -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> > +
> >  	if (macio_resource_count(mdev) >= 2) {
> >  		if (macio_request_resource(mdev, 1, "ide-pmac (dma)"))
> >  			printk(KERN_WARNING "ide-pmac: can't request DMA "
> > @@ -1192,7 +1179,7 @@ pmac_ide_macio_attach(struct macio_dev *
> >  			pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000);
> >  	} else
> >  		pmif->dma_regs = NULL;
> > -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
> > +
> >  	dev_set_drvdata(&mdev->ofdev.dev, pmif);
> >  
> >  	memset(&hw, 0, sizeof(hw));
> > @@ -1300,9 +1287,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev
> >  
> >  	base = ioremap(rbase, rlen);
> >  	pmif->regbase = (unsigned long) base + 0x2000;
> > -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> >  	pmif->dma_regs = base + 0x1000;
> > -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
> >  	pmif->kauai_fcr = base;
> >  	pmif->irq = pdev->irq;
> >  
> > @@ -1434,8 +1419,6 @@ out:
> >  	return error;
> >  }
> >  
> > -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> > -
> >  /*
> >   * pmac_ide_build_dmatable builds the DBDMA command list
> >   * for a transfer and sets the DBDMA channel to point to it.
> > @@ -1723,13 +1706,6 @@ static int __devinit pmac_ide_init_dma(i
> >  
> >  	return 0;
> >  }
> > -#else
> > -static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
> > -				       const struct ide_port_info *d)
> > -{
> > -	return -EOPNOTSUPP;
> > -}
> > -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
> >  
> >  module_init(pmac_ide_probe);
> >  
> > &#0;
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux