Hello. David Daney wrote:
The forthcoming OCTEON SOC Compact Flash driver needs a few more timing values than were available in the ata_timing table. I add new columns for write_hold, read_hold, and read_holdz times. The values were obtained from the Compact Flash specification Rev 4.1. Signed-off-by: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
Not quite correct...
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 4214bfb..b29b7df 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2946,33 +2946,33 @@ int sata_set_spd(struct ata_link *link) */static const struct ata_timing ata_timing[] = {
[...]
+/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 30, 5, 30, 960, 0 }, */ + { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 30, 5, 30, 600, 0 }, + { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 20, 5, 30, 383, 0 }, + { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 15, 5, 30, 240, 0 }, + { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 10, 5, 30, 180, 0 }, + { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 10, 5, 30, 120, 0 }, + { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 5, 5, 20, 100, 0 }, + { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 5, 5, 20, 80, 0 }, + + { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 30, 5, 0, 960, 0 }, + { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 30, 5, 0, 480, 0 }, + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 15, 5, 0, 240, 0 }, + + { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 20, 20, 0, 480, 0 },
Wrong, -DIOR hold time is 5 ns for MWDMA0 as well as for all other modes.
diff --git a/include/linux/libata.h b/include/linux/libata.h index 59b0f1c..7c44e45 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h
[...]
@@ -863,6 +868,9 @@ struct ata_timing { unsigned short cyc8b; /* t0 for 8-bit I/O */ unsigned short active; /* t2 or tD */ unsigned short recover; /* t2i or tK */ + unsigned short write_hold; /* t4 */ + unsigned short read_hold; /* t6 */
-DIOR hold time is 5 ns for all PIO and MWDMA modes -- there's no sense in storing it here.
+ unsigned short read_holdz; /* t6z or tj */
T6z and Tj are not the same timing. Well, you specify it as 0 for DMA modes anyway...
MBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html