Hello.
David Daney wrote:
As part of our efforts to get the Cavium OCTEON processor support
merged (see: http://marc.info/?l=linux-mips&m=122704699515601), we
have this CF driver for your consideration.
Most OCTEON variants have *no* DMA or interrupt support on the CF
interface so for these, only PIO is supported. Although if DMA is
available, we do take advantage of it.
The register definitions are part of the chip support patch set
mentioned above, and are not included here.
At this point I would like to get feedback on the patch and would
expect that it would merge via the linux-mips tree along with the rest
of the chip support.
Thanks,
Signed-off-by: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
new file mode 100644
index 0000000..e8712c0
--- /dev/null
+++ b/drivers/ata/pata_octeon_cf.c
@@ -0,0 +1,942 @@
[...]
+/**
+ * Handle an I/O request.
+ *
+ * @cf: Device to access
+ * @lba_sector: Starting sector
+ * @num_sectors:
+ * Number of sectors to transfer
+ * @buffer: Data buffer
+ * @write: Is the a write. Default to a read
+ */
+static unsigned int octeon_cf_data_xfer(struct ata_device *dev,
+ unsigned char *buffer,
+ unsigned int buflen,
+ int rw)
+{
+ struct ata_port *ap = dev->link->ap;
+ struct octeon_cf_data *ocd = ap->dev->platform_data;
+ void __iomem *data_addr = ap->ioaddr.data_addr;
+ unsigned int words;
+ unsigned int count;
+
+ /*
+ * Odd lengths are not supported. We should always be a
+ * multiple of 512.
+ */
+ BUG_ON(buflen & 1);
+ if (ocd->is16bit) {
+ words = buflen / 2;
+ if (rw) {
+ count = 16;
+ while (words--) {
+ iowrite16(*(uint16_t *)buffer, data_addr);
+ buffer += sizeof(uint16_t);
+ /*
+ * Every 16 writes do a read so the
+ * bootbus FIFO doesn't fill up.
+ */
+ if (--count == 0) {
+ ioread8(ap->ioaddr.altstatus_addr);
+ count = 16;
+ }
+ }
+ } else {
+ while (words--) {
+ *(uint16_t *)buffer = ioread16(data_addr);
+ buffer += sizeof(uint16_t);
+ }
+ }
+ } else {
+ /* 8-bit */
+ words = buflen;
+ if (rw) {
+ count = 16;
+ while (words--) {
+ iowrite8(*buffer, data_addr);
About the 8-bit mode: you need to issue the Set Features command with
opcode 1 to enable that mode -- libata currently doesn't do that, so it won't
work I suppose...
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
