Re: AHCI backplane errors in 2.6.27

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Lazy <lazy404@xxxxxxxxx> writes:
> When booting 2.6.27-rc1 kernel on out intel SR1530HSH ( Quad core Xeon X3320)
> Sata controller is ICH9r running in AHCI mode with newest bios.
>
> After loading ahci driver backplane leds go amber which indicates a
> non fatal error according to my intel resseller.

I see the same effect on a "FUJITSU SIEMENS PRIMERGY TX150 S6" which
also has a ICH9r, running with the fake megaraid disabled in the bios.
This has 4 hotswap drive bays. When I boot from drive 0, the remaining
drives all blink their orange fault led.

It is possible to suppress the blinking with the boot parameter
ahci.ahci_em_messages=0.

-- 
Frank Cringle

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux