http://bugzilla.kernel.org/show_bug.cgi?id=11761 Summary: External BIOS-less VIA VT6410 card doesn't attach CD-ROM devices attached to the card Product: IO/Storage Version: 2.5 KernelVersion: 2.6.27 Platform: All OS/Version: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: IDE AssignedTo: io_ide@xxxxxxxxxxxxxxxxxxxx ReportedBy: brefi@xxxxxxxxx Earliest failing kernel version: 2.6.26 is the first tried Distribution: Debian-4 Etch Hardware Environment: i946GZ+ICH7 (G31) + Core2Duo CPU Software Environment: Xorg + IceWM Problem Description: ATAPI CDROM (mwdma2) and DVD-RW (udma-4) attached to the add-in card VT6410 card aren't available after OS boot although the card itself is detected & initialized normally by the OS. Having attached as slave devices to the HDD on the only PATA ICH7 channel of the motherboard, they're detected normally and work well. In WinXP, the devices are detected & work well on the card ( so, the card supports ATAPI CD/DVD as declared ) The card doesn't have any boot BIOS-ROM on the board thus isn't bootable itself. The LibATA's driver & SCSI-CDROM support are used. The logs are as follows: ------------------------- DEBUG.LOG Oct 14 00:00:23 vano-linux kernel: Entering add_active_range(0, 0, 229376) 0 entries of 256 used Oct 14 00:00:23 vano-linux kernel: On node 0 totalpages: 229376 Oct 14 00:00:23 vano-linux kernel: DMA zone: 32 pages used for memmap Oct 14 00:00:23 vano-linux kernel: DMA zone: 0 pages reserved Oct 14 00:00:23 vano-linux kernel: DMA zone: 4064 pages, LIFO batch:0 Oct 14 00:00:23 vano-linux kernel: Normal zone: 1760 pages used for memmap Oct 14 00:00:23 vano-linux kernel: Normal zone: 223520 pages, LIFO batch:31 Oct 14 00:00:23 vano-linux kernel: Movable zone: 0 pages used for memmap Oct 14 00:00:23 vano-linux kernel: ACPI: Local APIC address 0xfee00000 Oct 14 00:00:23 vano-linux kernel: mapped APIC to ffffb000 (fee00000) Oct 14 00:00:23 vano-linux kernel: CPA: page pool initialized 1 of 1 pages preallocated Oct 14 00:00:23 vano-linux kernel: ACPI: EC: Look up EC in DSDT Oct 14 00:00:23 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Oct 14 00:00:23 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Oct 14 00:00:23 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64 Oct 14 00:00:23 vano-linux kernel: pci 0000:00:02.0: Boot video device Oct 14 00:00:23 vano-linux kernel: Switched to high resolution mode on CPU 0 Oct 14 00:00:23 vano-linux kernel: Probing IDE interface ide0... Oct 14 00:00:23 vano-linux kernel: Probing IDE interface ide1... Oct 14 00:00:23 vano-linux kernel: PCI: setting IRQ 5 as level-triggered Oct 14 00:00:23 vano-linux kernel: PCI: setting IRQ 10 as level-triggered Oct 14 00:00:23 vano-linux kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D' Oct 14 00:00:23 vano-linux kernel: PCI: setting IRQ 11 as level-triggered Oct 14 00:00:23 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64 Oct 14 00:00:23 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64 Oct 14 00:00:23 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64 Oct 14 00:00:23 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64 Oct 14 00:00:23 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1b.0 to 64 Oct 14 00:00:23 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64 Oct 14 00:00:23 vano-linux kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Oct 14 00:00:23 vano-linux kernel: irda_init() Oct 14 00:00:38 vano-linux NetworkManager: <debug info>^I[1223924438.020149] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/platform_bluetooth'). Oct 14 00:01:52 vano-linux NetworkManager: <debug info>^I[1223924512.007949] nm_print_open_socks (): Open Sockets List: Oct 14 00:01:52 vano-linux NetworkManager: <debug info>^I[1223924512.007967] nm_print_open_socks (): Open Sockets List Done. Oct 14 00:59:26 vano-linux kernel: NR_CPUS: 8, nr_cpu_ids: 4 Oct 14 00:59:26 vano-linux kernel: mapped APIC to ffffb000 (fee00000) Oct 14 00:59:26 vano-linux kernel: mapped IOAPIC to ffffa000 (fec00000) Oct 14 00:59:26 vano-linux kernel: CPA: page pool initialized 1 of 1 pages preallocated Oct 14 00:59:26 vano-linux kernel: CPU0 attaching sched-domain: Oct 14 00:59:26 vano-linux kernel: domain 0: span 0-1 Oct 14 00:59:26 vano-linux kernel: groups: 0 1 Oct 14 00:59:26 vano-linux kernel: CPU1 attaching sched-domain: Oct 14 00:59:26 vano-linux kernel: domain 0: span 0-1 Oct 14 00:59:26 vano-linux kernel: groups: 1 0 Oct 14 00:59:26 vano-linux kernel: ACPI: EC: Look up EC in DSDT Oct 14 00:59:26 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Oct 14 00:59:26 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Oct 14 00:59:26 vano-linux kernel: libata version 3.00 loaded. Oct 14 00:59:26 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64 Oct 14 00:59:26 vano-linux kernel: pci 0000:00:02.0: Boot video device Oct 14 00:59:26 vano-linux kernel: Switched to high resolution mode on CPU 1 Oct 14 00:59:26 vano-linux kernel: Switched to high resolution mode on CPU 0 Oct 14 00:59:26 vano-linux kernel: ata_piix 0000:00:1f.2: version 2.12 Oct 14 00:59:26 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64 Oct 14 00:59:26 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 14 00:59:26 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 14 00:59:26 vano-linux kernel: sr 0:0:1:0: Attached scsi CD-ROM sr0 Oct 14 00:59:26 vano-linux kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D' Oct 14 00:59:26 vano-linux kernel: pata_via 0000:01:01.0: version 0.3.3 Oct 14 00:59:26 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64 Oct 14 00:59:26 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64 Oct 14 00:59:26 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64 Oct 14 00:59:26 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64 Oct 14 00:59:26 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64 Oct 14 00:59:26 vano-linux kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Oct 14 00:59:26 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1b.0 to 64 Oct 14 00:59:26 vano-linux kernel: irda_init() Oct 14 01:28:15 vano-linux kernel: ACPI: IRQ0 used by override. Oct 14 01:28:15 vano-linux kernel: ACPI: IRQ2 used by override. Oct 14 01:28:15 vano-linux kernel: ACPI: IRQ9 used by override. Oct 14 01:28:15 vano-linux kernel: NR_CPUS: 8, nr_cpu_ids: 4 Oct 14 01:28:15 vano-linux kernel: mapped APIC to ffffb000 (fee00000) Oct 14 01:28:15 vano-linux kernel: mapped IOAPIC to ffffa000 (fec00000) Oct 14 01:28:15 vano-linux kernel: CPA: page pool initialized 1 of 1 pages preallocated Oct 14 01:28:15 vano-linux kernel: CPU0 attaching sched-domain: Oct 14 01:28:15 vano-linux kernel: domain 0: span 0-1 Oct 14 01:28:15 vano-linux kernel: groups: 0 1 Oct 14 01:28:15 vano-linux kernel: CPU1 attaching sched-domain: Oct 14 01:28:15 vano-linux kernel: domain 0: span 0-1 Oct 14 01:28:15 vano-linux kernel: groups: 1 0 Oct 14 01:28:15 vano-linux kernel: ACPI: EC: Look up EC in DSDT Oct 14 01:28:15 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Oct 14 01:28:15 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Oct 14 01:28:15 vano-linux kernel: libata version 3.00 loaded. Oct 14 01:28:15 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64 Oct 14 01:28:15 vano-linux kernel: pci 0000:00:02.0: Boot video device Oct 14 01:28:15 vano-linux kernel: Switched to high resolution mode on CPU 1 Oct 14 01:28:15 vano-linux kernel: Switched to high resolution mode on CPU 0 Oct 14 01:28:15 vano-linux kernel: ata_piix 0000:00:1f.2: version 2.12 Oct 14 01:28:15 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64 Oct 14 01:28:15 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 14 01:28:15 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 14 01:28:15 vano-linux kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D' Oct 14 01:28:15 vano-linux kernel: pata_via 0000:01:01.0: version 0.3.3 Oct 14 01:28:15 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64 Oct 14 01:28:15 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64 Oct 14 01:28:15 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64 Oct 14 01:28:15 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64 Oct 14 01:28:15 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64 Oct 14 01:28:15 vano-linux kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Oct 14 01:28:15 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1b.0 to 64 Oct 14 01:28:15 vano-linux kernel: irda_init() Oct 14 01:28:24 vano-linux NetworkManager: <debug info>^I[1223929704.952758] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/platform_bluetooth'). Oct 14 01:30:44 vano-linux NetworkManager: <debug info>^I[1223929844.489467] nm_print_open_socks (): Open Sockets List: Oct 14 01:30:44 vano-linux NetworkManager: <debug info>^I[1223929844.489487] nm_print_open_socks (): Open Sockets List Done. Oct 14 01:33:24 vano-linux kernel: ACPI: IRQ0 used by override. Oct 14 01:33:24 vano-linux kernel: ACPI: IRQ2 used by override. Oct 14 01:33:24 vano-linux kernel: ACPI: IRQ9 used by override. Oct 14 01:33:24 vano-linux kernel: NR_CPUS: 8, nr_cpu_ids: 4 Oct 14 01:33:24 vano-linux kernel: mapped APIC to ffffb000 (fee00000) Oct 14 01:33:24 vano-linux kernel: mapped IOAPIC to ffffa000 (fec00000) Oct 14 01:33:24 vano-linux kernel: CPA: page pool initialized 1 of 1 pages preallocated Oct 14 01:33:24 vano-linux kernel: CPU0 attaching sched-domain: Oct 14 01:33:24 vano-linux kernel: domain 0: span 0-1 Oct 14 01:33:24 vano-linux kernel: groups: 0 1 Oct 14 01:33:24 vano-linux kernel: CPU1 attaching sched-domain: Oct 14 01:33:24 vano-linux kernel: domain 0: span 0-1 Oct 14 01:33:24 vano-linux kernel: groups: 1 0 Oct 14 01:33:24 vano-linux kernel: ACPI: EC: Look up EC in DSDT Oct 14 01:33:24 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Oct 14 01:33:24 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Oct 14 01:33:24 vano-linux kernel: libata version 3.00 loaded. Oct 14 01:33:24 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64 Oct 14 01:33:24 vano-linux kernel: pci 0000:00:02.0: Boot video device Oct 14 01:33:24 vano-linux kernel: Switched to high resolution mode on CPU 1 Oct 14 01:33:24 vano-linux kernel: Switched to high resolution mode on CPU 0 Oct 14 01:33:24 vano-linux kernel: ata_piix 0000:00:1f.2: version 2.12 Oct 14 01:33:24 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64 Oct 14 01:33:24 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 14 01:33:24 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 14 01:33:24 vano-linux kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D' Oct 14 01:33:24 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64 Oct 14 01:33:24 vano-linux kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Oct 14 01:33:24 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64 Oct 14 01:33:24 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64 Oct 14 01:33:24 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64 Oct 14 01:33:24 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64 Oct 14 01:33:24 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1b.0 to 64 Oct 14 01:33:24 vano-linux kernel: pata_via 0000:01:01.0: version 0.3.3 Oct 14 01:33:24 vano-linux kernel: irda_init() Oct 14 01:50:49 vano-linux kernel: ACPI: IRQ0 used by override. Oct 14 01:50:49 vano-linux kernel: ACPI: IRQ2 used by override. Oct 14 01:50:49 vano-linux kernel: ACPI: IRQ9 used by override. Oct 14 01:50:49 vano-linux kernel: NR_CPUS: 8, nr_cpu_ids: 4 Oct 14 01:50:49 vano-linux kernel: mapped APIC to ffffb000 (fee00000) Oct 14 01:50:49 vano-linux kernel: mapped IOAPIC to ffffa000 (fec00000) Oct 14 01:50:49 vano-linux kernel: CPA: page pool initialized 1 of 1 pages preallocated Oct 14 01:50:49 vano-linux kernel: CPU0 attaching sched-domain: Oct 14 01:50:49 vano-linux kernel: domain 0: span 0-1 Oct 14 01:50:49 vano-linux kernel: groups: 0 1 Oct 14 01:50:49 vano-linux kernel: CPU1 attaching sched-domain: Oct 14 01:50:49 vano-linux kernel: domain 0: span 0-1 Oct 14 01:50:49 vano-linux kernel: groups: 1 0 Oct 14 01:50:49 vano-linux kernel: ACPI: EC: Look up EC in DSDT Oct 14 01:50:49 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Oct 14 01:50:49 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Oct 14 01:50:49 vano-linux kernel: libata version 3.00 loaded. Oct 14 01:50:49 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64 Oct 14 01:50:49 vano-linux kernel: pci 0000:00:02.0: Boot video device Oct 14 01:50:49 vano-linux kernel: Switched to high resolution mode on CPU 1 Oct 14 01:50:49 vano-linux kernel: Switched to high resolution mode on CPU 0 Oct 14 01:50:49 vano-linux kernel: ata_piix 0000:00:1f.2: version 2.12 Oct 14 01:50:49 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64 Oct 14 01:50:49 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 14 01:50:49 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 14 01:50:49 vano-linux kernel: pata_via 0000:01:01.0: version 0.3.3 Oct 14 01:50:49 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64 Oct 14 01:50:49 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64 Oct 14 01:50:49 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64 Oct 14 01:50:49 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64 Oct 14 01:50:49 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64 Oct 14 01:50:49 vano-linux kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Oct 14 01:50:49 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1b.0 to 64 Oct 14 01:50:49 vano-linux kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D' Oct 14 01:50:49 vano-linux kernel: irda_init() Oct 14 01:50:58 vano-linux NetworkManager: <debug info>^I[1223931058.905585] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/platform_bluetooth'). Oct 14 01:52:52 vano-linux pppd[3424]: using channel 1 Oct 14 01:52:54 vano-linux pppd[3424]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xbf1cb84d> <pcomp> <accomp>] Oct 14 01:52:54 vano-linux pppd[3424]: rcvd [LCP ConfReq id=0x61 <asyncmap 0xa0000> <auth pap> <magic 0xbb5c3c4e> <pcomp> <accomp>] Oct 14 01:52:54 vano-linux pppd[3424]: sent [LCP ConfAck id=0x61 <asyncmap 0xa0000> <auth pap> <magic 0xbb5c3c4e> <pcomp> <accomp>] Oct 14 01:52:54 vano-linux pppd[3424]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xbf1cb84d> <pcomp> <accomp>] Oct 14 01:52:54 vano-linux pppd[3424]: sent [LCP EchoReq id=0x0 magic=0xbf1cb84d] Oct 14 01:52:54 vano-linux pppd[3424]: sent [PAP AuthReq id=0x1 user="userok" password=<hidden>] Oct 14 01:52:54 vano-linux pppd[3424]: rcvd [LCP EchoRep id=0x0 magic=0xbb5c3c4e] Oct 14 01:52:54 vano-linux pppd[3424]: rcvd [PAP AuthAck id=0x1 ""] Oct 14 01:52:54 vano-linux pppd[3424]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>] Oct 14 01:52:54 vano-linux pppd[3424]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>] Oct 14 01:52:54 vano-linux pppd[3424]: rcvd [IPCP ConfReq id=0x1 <compress VJ 0f 00> <addr 172.16.234.12>] Oct 14 01:52:54 vano-linux pppd[3424]: sent [IPCP ConfAck id=0x1 <compress VJ 0f 00> <addr 172.16.234.12>] Oct 14 01:52:55 vano-linux pppd[3424]: rcvd [LCP ProtRej id=0x62 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f] Oct 14 01:52:55 vano-linux pppd[3424]: Protocol-Reject for 'Compression Control Protocol' (0x80fd) received Oct 14 01:52:55 vano-linux pppd[3424]: rcvd [IPCP ConfNak id=0x1 <addr 94.158.56.236> <ms-dns1 94.158.48.2> <ms-dns3 94.158.48.1>] Oct 14 01:52:55 vano-linux pppd[3424]: sent [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 94.158.56.236> <ms-dns1 94.158.48.2> <ms-dns3 94.158.48.1>] Oct 14 01:52:55 vano-linux pppd[3424]: rcvd [IPCP ConfAck id=0x2 <compress VJ 0f 01> <addr 94.158.56.236> <ms-dns1 94.158.48.2> <ms-dns3 94.158.48.1>] Oct 14 01:52:55 vano-linux pppd[3424]: Script /etc/ppp/ip-up started (pid 3448) Oct 14 01:52:57 vano-linux pppd[3424]: Script /etc/ppp/ip-up finished (pid 3448), status = 0x0 Oct 14 02:05:55 vano-linux pppd[3424]: Script /etc/ppp/ip-down started (pid 3549) Oct 14 02:05:55 vano-linux pppd[3424]: sent [LCP TermReq id=0x2 "User request"] Oct 14 02:05:55 vano-linux pppd[3424]: Script /etc/ppp/ip-down finished (pid 3549), status = 0x0 Oct 14 02:05:55 vano-linux pppd[3424]: rcvd [LCP TermAck id=0x2] Oct 14 02:19:22 vano-linux kernel: usb-storage: device found at 3 Oct 14 02:19:22 vano-linux kernel: usb-storage: waiting for device to settle before scanning Oct 14 02:19:27 vano-linux kernel: sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00 Oct 14 02:19:27 vano-linux kernel: sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00 Oct 14 02:19:28 vano-linux kernel: usb-storage: device scan complete Oct 14 02:20:49 vano-linux kernel: usb-storage: device found at 4 Oct 14 02:20:49 vano-linux kernel: usb-storage: waiting for device to settle before scanning Oct 14 02:20:54 vano-linux kernel: sd 5:0:0:0: [sdb] Mode Sense: 00 00 00 00 Oct 14 02:20:54 vano-linux kernel: sd 5:0:0:0: [sdb] Mode Sense: 00 00 00 00 Oct 14 02:20:55 vano-linux kernel: usb-storage: device scan complete Oct 14 02:24:14 vano-linux kernel: ACPI: IRQ0 used by override. Oct 14 02:24:14 vano-linux kernel: ACPI: IRQ2 used by override. Oct 14 02:24:14 vano-linux kernel: ACPI: IRQ9 used by override. Oct 14 02:24:14 vano-linux kernel: NR_CPUS: 8, nr_cpu_ids: 4 Oct 14 02:24:14 vano-linux kernel: mapped APIC to ffffb000 (fee00000) Oct 14 02:24:14 vano-linux kernel: mapped IOAPIC to ffffa000 (fec00000) Oct 14 02:24:14 vano-linux kernel: CPA: page pool initialized 1 of 1 pages preallocated Oct 14 02:24:14 vano-linux kernel: CPU0 attaching sched-domain: Oct 14 02:24:14 vano-linux kernel: domain 0: span 0-1 Oct 14 02:24:14 vano-linux kernel: groups: 0 1 Oct 14 02:24:14 vano-linux kernel: CPU1 attaching sched-domain: Oct 14 02:24:14 vano-linux kernel: domain 0: span 0-1 Oct 14 02:24:14 vano-linux kernel: groups: 1 0 Oct 14 02:24:14 vano-linux kernel: ACPI: EC: Look up EC in DSDT Oct 14 02:24:14 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Oct 14 02:24:14 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Oct 14 02:24:14 vano-linux kernel: libata version 3.00 loaded. Oct 14 02:24:14 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64 Oct 14 02:24:14 vano-linux kernel: pci 0000:00:02.0: Boot video device Oct 14 02:24:14 vano-linux kernel: Switched to high resolution mode on CPU 1 Oct 14 02:24:14 vano-linux kernel: Switched to high resolution mode on CPU 0 Oct 14 02:24:14 vano-linux kernel: ata_piix 0000:00:1f.2: version 2.12 Oct 14 02:24:14 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64 Oct 14 02:24:14 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 14 02:24:14 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 14 02:24:14 vano-linux kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D' Oct 14 02:24:14 vano-linux kernel: pata_via 0000:01:01.0: version 0.3.3 Oct 14 02:24:14 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64 Oct 14 02:24:14 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64 Oct 14 02:24:14 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64 Oct 14 02:24:14 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64 Oct 14 02:24:14 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64 Oct 14 02:24:14 vano-linux kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Oct 14 02:24:14 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1b.0 to 64 Oct 14 02:24:14 vano-linux kernel: irda_init() Oct 14 02:25:38 vano-linux kernel: pata_via 0000:01:01.0: version 0.3.3 Oct 14 02:25:38 vano-linux NetworkManager: <debug info>^I[1223933138.036312] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1106_3164_scsi_host'). Oct 14 02:25:38 vano-linux NetworkManager: <debug info>^I[1223933138.047379] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1106_3164_scsi_host_0'). Oct 14 02:28:46 vano-linux kernel: usb-storage: device found at 3 Oct 14 02:28:46 vano-linux kernel: usb-storage: waiting for device to settle before scanning Oct 14 02:28:51 vano-linux kernel: sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 Oct 14 02:28:51 vano-linux kernel: sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 Oct 14 02:28:51 vano-linux kernel: usb-storage: device scan complete Oct 14 02:33:09 vano-linux pppd[5486]: using channel 1 Oct 14 02:33:11 vano-linux pppd[5486]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xeda4a6bb> <pcomp> <accomp>] Oct 14 02:33:11 vano-linux pppd[5486]: rcvd [LCP ConfReq id=0xb2 <asyncmap 0xa0000> <auth pap> <magic 0xdb76219b> <pcomp> <accomp>] Oct 14 02:33:11 vano-linux pppd[5486]: sent [LCP ConfAck id=0xb2 <asyncmap 0xa0000> <auth pap> <magic 0xdb76219b> <pcomp> <accomp>] Oct 14 02:33:11 vano-linux pppd[5486]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xeda4a6bb> <pcomp> <accomp>] Oct 14 02:33:11 vano-linux pppd[5486]: sent [LCP EchoReq id=0x0 magic=0xeda4a6bb] Oct 14 02:33:11 vano-linux pppd[5486]: sent [PAP AuthReq id=0x1 user="userok" password=<hidden>] Oct 14 02:33:12 vano-linux pppd[5486]: rcvd [LCP EchoRep id=0x0 magic=0xdb76219b] Oct 14 02:33:12 vano-linux pppd[5486]: rcvd [PAP AuthAck id=0x1 ""] Oct 14 02:33:12 vano-linux pppd[5486]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>] Oct 14 02:33:12 vano-linux pppd[5486]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>] Oct 14 02:33:12 vano-linux pppd[5486]: rcvd [IPCP ConfReq id=0x1 <compress VJ 0f 00> <addr 172.16.234.11>] Oct 14 02:33:12 vano-linux pppd[5486]: sent [IPCP ConfAck id=0x1 <compress VJ 0f 00> <addr 172.16.234.11>] Oct 14 02:33:12 vano-linux pppd[5486]: rcvd [LCP ProtRej id=0xb3 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f] Oct 14 02:33:12 vano-linux pppd[5486]: Protocol-Reject for 'Compression Control Protocol' (0x80fd) received Oct 14 02:33:12 vano-linux pppd[5486]: rcvd [IPCP ConfNak id=0x1 <addr 94.158.55.178> <ms-dns1 94.158.48.2> <ms-dns3 94.158.48.1>] Oct 14 02:33:12 vano-linux pppd[5486]: sent [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 94.158.55.178> <ms-dns1 94.158.48.2> <ms-dns3 94.158.48.1>] Oct 14 02:33:12 vano-linux pppd[5486]: rcvd [IPCP ConfAck id=0x2 <compress VJ 0f 01> <addr 94.158.55.178> <ms-dns1 94.158.48.2> <ms-dns3 94.158.48.1>] Oct 14 02:33:12 vano-linux pppd[5486]: Script /etc/ppp/ip-up started (pid 5529) Oct 14 02:33:13 vano-linux pppd[5486]: Script /etc/ppp/ip-up finished (pid 5529), status = 0x0 Oct 14 03:03:48 vano-linux pppd[5486]: Script /etc/ppp/ip-down started (pid 5696) Oct 14 03:03:48 vano-linux pppd[5486]: sent [LCP TermReq id=0x2 "User request"] Oct 14 03:03:48 vano-linux pppd[5486]: Script /etc/ppp/ip-down finished (pid 5696), status = 0x0 Oct 14 03:03:48 vano-linux pppd[5486]: rcvd [LCP TermAck id=0x2] Oct 14 03:48:20 vano-linux NetworkManager: <debug info>^I[1223938100.372020] nm_print_open_socks (): Open Sockets List: Oct 14 03:48:20 vano-linux NetworkManager: <debug info>^I[1223938100.372039] nm_print_open_socks (): Open Sockets List Done. Oct 14 03:48:54 vano-linux kernel: ACPI: IRQ0 used by override. Oct 14 03:48:54 vano-linux kernel: ACPI: IRQ2 used by override. Oct 14 03:48:54 vano-linux kernel: ACPI: IRQ9 used by override. Oct 14 03:48:54 vano-linux kernel: NR_CPUS: 8, nr_cpu_ids: 4 Oct 14 03:48:54 vano-linux kernel: mapped APIC to ffffb000 (fee00000) Oct 14 03:48:54 vano-linux kernel: mapped IOAPIC to ffffa000 (fec00000) Oct 14 03:48:54 vano-linux kernel: CPA: page pool initialized 1 of 1 pages preallocated Oct 14 03:48:54 vano-linux kernel: CPU0 attaching sched-domain: Oct 14 03:48:54 vano-linux kernel: domain 0: span 0-1 Oct 14 03:48:54 vano-linux kernel: groups: 0 1 Oct 14 03:48:54 vano-linux kernel: CPU1 attaching sched-domain: Oct 14 03:48:54 vano-linux kernel: domain 0: span 0-1 Oct 14 03:48:54 vano-linux kernel: groups: 1 0 Oct 14 03:48:54 vano-linux kernel: ACPI: EC: Look up EC in DSDT Oct 14 03:48:54 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Oct 14 03:48:54 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Oct 14 03:48:54 vano-linux kernel: libata version 3.00 loaded. Oct 14 03:48:54 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64 Oct 14 03:48:54 vano-linux kernel: pci 0000:00:02.0: Boot video device Oct 14 03:48:54 vano-linux kernel: Switched to high resolution mode on CPU 1 Oct 14 03:48:54 vano-linux kernel: Switched to high resolution mode on CPU 0 Oct 14 03:48:54 vano-linux kernel: ata_piix 0000:00:1f.2: version 2.12 Oct 14 03:48:54 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64 Oct 14 03:48:54 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 14 03:48:54 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 14 03:48:54 vano-linux kernel: pata_via 0000:01:01.0: version 0.3.3 Oct 14 03:48:54 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64 Oct 14 03:48:54 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64 Oct 14 03:48:54 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64 Oct 14 03:48:54 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64 Oct 14 03:48:54 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64 Oct 14 03:48:54 vano-linux kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Oct 14 03:48:54 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1b.0 to 64 Oct 14 03:48:54 vano-linux kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D' Oct 14 03:48:54 vano-linux kernel: irda_init() Oct 14 03:49:02 vano-linux NetworkManager: <debug info>^I[1223938142.848736] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/platform_bluetooth'). Oct 14 03:52:16 vano-linux NetworkManager: <debug info>^I[1223938336.578030] nm_print_open_socks (): Open Sockets List: Oct 14 03:52:16 vano-linux NetworkManager: <debug info>^I[1223938336.578050] nm_print_open_socks (): Open Sockets List Done. Oct 14 08:12:26 vano-linux kernel: ACPI: IRQ0 used by override. Oct 14 08:12:26 vano-linux kernel: ACPI: IRQ2 used by override. Oct 14 08:12:26 vano-linux kernel: ACPI: IRQ9 used by override. Oct 14 08:12:26 vano-linux kernel: NR_CPUS: 8, nr_cpu_ids: 4 Oct 14 08:12:26 vano-linux kernel: mapped APIC to ffffb000 (fee00000) Oct 14 08:12:26 vano-linux kernel: mapped IOAPIC to ffffa000 (fec00000) Oct 14 08:12:26 vano-linux kernel: CPA: page pool initialized 1 of 1 pages preallocated Oct 14 08:12:26 vano-linux kernel: CPU0 attaching sched-domain: Oct 14 08:12:26 vano-linux kernel: domain 0: span 0-1 Oct 14 08:12:26 vano-linux kernel: groups: 0 1 Oct 14 08:12:26 vano-linux kernel: CPU1 attaching sched-domain: Oct 14 08:12:26 vano-linux kernel: domain 0: span 0-1 Oct 14 08:12:26 vano-linux kernel: groups: 1 0 Oct 14 08:12:26 vano-linux kernel: ACPI: EC: Look up EC in DSDT Oct 14 08:12:26 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Oct 14 08:12:26 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Oct 14 08:12:26 vano-linux kernel: libata version 3.00 loaded. Oct 14 08:12:26 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64 Oct 14 08:12:26 vano-linux kernel: pci 0000:00:02.0: Boot video device Oct 14 08:12:26 vano-linux kernel: Switched to high resolution mode on CPU 1 Oct 14 08:12:26 vano-linux kernel: Switched to high resolution mode on CPU 0 Oct 14 08:12:26 vano-linux kernel: ata_piix 0000:00:1f.2: version 2.12 Oct 14 08:12:26 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64 Oct 14 08:12:26 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 14 08:12:26 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 14 08:12:26 vano-linux kernel: pata_via 0000:01:01.0: version 0.3.3 Oct 14 08:12:26 vano-linux kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D' Oct 14 08:12:26 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64 Oct 14 08:12:26 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64 Oct 14 08:12:26 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64 Oct 14 08:12:26 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64 Oct 14 08:12:26 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64 Oct 14 08:12:26 vano-linux kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Oct 14 08:12:26 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1b.0 to 64 Oct 14 08:12:26 vano-linux kernel: irda_init() Oct 14 08:12:35 vano-linux NetworkManager: <debug info>^I[1223953955.815939] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/platform_bluetooth'). Oct 14 08:18:04 vano-linux NetworkManager: <debug info>^I[1223954284.130193] nm_print_open_socks (): Open Sockets List: Oct 14 08:18:04 vano-linux NetworkManager: <debug info>^I[1223954284.130213] nm_print_open_socks (): Open Sockets List Done. Oct 14 22:52:50 vano-linux kernel: CPA: page pool initialized 1 of 1 pages preallocated Oct 14 22:52:50 vano-linux kernel: CPU0 attaching sched-domain: Oct 14 22:52:50 vano-linux kernel: domain 0: span 0-1 Oct 14 22:52:50 vano-linux kernel: groups: 0 1 Oct 14 22:52:50 vano-linux kernel: CPU1 attaching sched-domain: Oct 14 22:52:50 vano-linux kernel: domain 0: span 0-1 Oct 14 22:52:50 vano-linux kernel: groups: 1 0 Oct 14 22:52:50 vano-linux kernel: ACPI: EC: Look up EC in DSDT Oct 14 22:52:50 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Oct 14 22:52:50 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Oct 14 22:52:50 vano-linux kernel: libata version 3.00 loaded. Oct 14 22:52:50 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64 Oct 14 22:52:50 vano-linux kernel: pci 0000:00:02.0: Boot video device Oct 14 22:52:50 vano-linux kernel: Switched to high resolution mode on CPU 1 Oct 14 22:52:50 vano-linux kernel: Switched to high resolution mode on CPU 0 Oct 14 22:52:50 vano-linux kernel: ata_piix 0000:00:1f.2: version 2.12 Oct 14 22:52:50 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64 Oct 14 22:52:50 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 14 22:52:50 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 14 22:52:50 vano-linux kernel: sr 0:0:1:0: Attached scsi CD-ROM sr0 Oct 14 22:52:50 vano-linux kernel: pata_via 0000:01:01.0: version 0.3.3 Oct 14 22:52:50 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64 Oct 14 22:52:50 vano-linux kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Oct 14 22:52:50 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64 Oct 14 22:52:50 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64 Oct 14 22:52:50 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64 Oct 14 22:52:50 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64 Oct 14 22:52:50 vano-linux kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D' Oct 14 22:52:50 vano-linux kernel: PCI: Setting latency timer of device 0000:00:1b.0 to 64 Oct 14 22:52:50 vano-linux kernel: usb-storage: device found at 3 Oct 14 22:52:50 vano-linux kernel: usb-storage: waiting for device to settle before scanning Oct 14 22:52:50 vano-linux kernel: irda_init() Oct 14 22:52:50 vano-linux kernel: sd 4:0:0:0: [sdb] Mode Sense: 23 00 80 00 Oct 14 22:52:50 vano-linux kernel: sd 4:0:0:0: [sdb] Mode Sense: 23 00 80 00 Oct 14 22:52:50 vano-linux kernel: usb-storage: device scan complete Oct 14 22:52:59 vano-linux NetworkManager: <debug info>^I[1224006779.184846] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/platform_bluetooth'). Oct 14 22:59:28 vano-linux pppd[4625]: using channel 1 Oct 14 22:59:29 vano-linux pppd[4625]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <callback CBCP> <magic 0xbe5ff9af> <pcomp> <accomp>] Oct 14 22:59:29 vano-linux pppd[4625]: rcvd [LCP ConfReq id=0xa4 <asyncmap 0xa0000> <auth pap> <magic 0xbfad0158> <pcomp> <accomp>] Oct 14 22:59:29 vano-linux pppd[4625]: sent [LCP ConfAck id=0xa4 <asyncmap 0xa0000> <auth pap> <magic 0xbfad0158> <pcomp> <accomp>] Oct 14 22:59:29 vano-linux pppd[4625]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <callback CBCP> <magic 0xbe5ff9af> <pcomp> <accomp>] Oct 14 22:59:29 vano-linux pppd[4625]: sent [LCP EchoReq id=0x0 magic=0xbe5ff9af] Oct 14 22:59:29 vano-linux pppd[4625]: cbcp_lowerup Oct 14 22:59:29 vano-linux pppd[4625]: want: 14 Oct 14 22:59:29 vano-linux pppd[4625]: sent [PAP AuthReq id=0x1 user="userok:callback" password=<hidden>] Oct 14 22:59:29 vano-linux pppd[4625]: rcvd [LCP EchoRep id=0x0 magic=0xbfad0158] Oct 14 22:59:30 vano-linux pppd[4625]: rcvd [PAP AuthAck id=0x1 ""] Oct 14 22:59:30 vano-linux pppd[4625]: cbcp_open Oct 14 22:59:30 vano-linux pppd[4625]: rcvd [CBCP Request id=0x32 < UserDefined delay = 0 number = >] 00 Oct 14 22:59:30 vano-linux pppd[4625]: length: 5 Oct 14 22:59:30 vano-linux pppd[4625]: user callback allowed Oct 14 22:59:30 vano-linux pppd[4625]: cbcp_resp cb_type=4 Oct 14 22:59:30 vano-linux pppd[4625]: cbcp_resp CONF_USER Oct 14 22:59:30 vano-linux pppd[4625]: sent [CBCP Response id=0x32 < UserDefined delay = 5 number = 2896574>] 32 38 39 36 35 37 34 00 Oct 14 22:59:30 vano-linux pppd[4625]: rcvd [IPCP ConfReq id=0x1 <compress VJ 0f 00> <addr 172.16.234.12>] Oct 14 22:59:30 vano-linux pppd[4625]: sent [IPCP TermAck id=0x1] Oct 14 22:59:30 vano-linux pppd[4625]: rcvd [CBCP Ack id=0x32 < UserDefined delay = 5 number = 2896574>] 32 38 39 36 35 37 34 00 Oct 14 22:59:30 vano-linux pppd[4625]: peer will call: 2896574 Oct 14 22:59:30 vano-linux pppd[4625]: sent [LCP TermReq id=0x2 "Call me back, please"] Oct 14 22:59:30 vano-linux pppd[4625]: rcvd [LCP TermAck id=0x2] Oct 14 23:00:03 vano-linux pppd[4635]: using channel 2 Oct 14 23:00:04 vano-linux pppd[4635]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd58c23de> <pcomp> <accomp>] Oct 14 23:00:04 vano-linux pppd[4635]: rcvd [LCP ConfReq id=0xa5 <asyncmap 0xa0000> <auth pap> <magic 0xbfad8ac0> <pcomp> <accomp>] Oct 14 23:00:04 vano-linux pppd[4635]: sent [LCP ConfAck id=0xa5 <asyncmap 0xa0000> <auth pap> <magic 0xbfad8ac0> <pcomp> <accomp>] Oct 14 23:00:04 vano-linux pppd[4635]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xd58c23de> <pcomp> <accomp>] Oct 14 23:00:04 vano-linux pppd[4635]: sent [LCP EchoReq id=0x0 magic=0xd58c23de] Oct 14 23:00:04 vano-linux pppd[4635]: sent [PAP AuthReq id=0x1 user="userok:callback" password=<hidden>] Oct 14 23:00:05 vano-linux pppd[4635]: rcvd [LCP EchoRep id=0x0 magic=0xbfad8ac0] Oct 14 23:00:05 vano-linux pppd[4635]: rcvd [PAP AuthAck id=0x1 ""] Oct 14 23:00:05 vano-linux pppd[4635]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15>] Oct 14 23:00:05 vano-linux pppd[4635]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>] Oct 14 23:00:05 vano-linux pppd[4635]: rcvd [IPCP ConfReq id=0x1 <compress VJ 0f 00> <addr 172.16.234.12>] Oct 14 23:00:05 vano-linux pppd[4635]: sent [IPCP ConfAck id=0x1 <compress VJ 0f 00> <addr 172.16.234.12>] Oct 14 23:00:05 vano-linux pppd[4635]: rcvd [LCP ProtRej id=0xa6 80 fd 01 01 00 0c 1a 04 78 00 18 04 78 00] Oct 14 23:00:05 vano-linux pppd[4635]: Protocol-Reject for 'Compression Control Protocol' (0x80fd) received Oct 14 23:00:05 vano-linux pppd[4635]: rcvd [IPCP ConfNak id=0x1 <addr 94.158.56.149> <ms-dns1 94.158.48.2> <ms-dns3 94.158.48.1>] Oct 14 23:00:05 vano-linux pppd[4635]: sent [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 94.158.56.149> <ms-dns1 94.158.48.2> <ms-dns3 94.158.48.1>] Oct 14 23:00:05 vano-linux pppd[4635]: rcvd [IPCP ConfAck id=0x2 <compress VJ 0f 01> <addr 94.158.56.149> <ms-dns1 94.158.48.2> <ms-dns3 94.158.48.1>] Oct 14 23:00:05 vano-linux pppd[4635]: Script /etc/ppp/ip-up started (pid 4659) Oct 14 23:00:06 vano-linux pppd[4635]: Script /etc/ppp/ip-up finished (pid 4659), status = 0x0 Oct 14 23:00:45 vano-linux kernel: usb-storage: device found at 4 Oct 14 23:00:45 vano-linux kernel: usb-storage: waiting for device to settle before scanning Oct 14 23:00:50 vano-linux kernel: sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00 Oct 14 23:00:50 vano-linux kernel: sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00 Oct 14 23:00:50 vano-linux kernel: usb-storage: device scan complete Oct 14 23:05:07 vano-linux pppd[4635]: Script /etc/ppp/ip-down started (pid 4812) Oct 14 23:05:07 vano-linux pppd[4635]: sent [LCP TermReq id=0x2 "User request"] Oct 14 23:05:07 vano-linux pppd[4635]: Script /etc/ppp/ip-down finished (pid 4812), status = 0x0 Oct 14 23:05:07 vano-linux pppd[4635]: rcvd [LCP TermAck id=0x2] Oct 14 23:27:56 vano-linux NetworkManager: <debug info>^I[1224008876.405652] nm_print_open_socks (): Open Sockets List: Oct 14 23:27:56 vano-linux NetworkManager: <debug info>^I[1224008876.405672] nm_print_open_socks (): Open Sockets List Done. Oct 14 23:28:32 vano-linux kernel: PCI: 0000:00:02.0 reg 10 32bit mmio: [fea80000, feafffff] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:00:02.0 reg 14 io port: [dc00, dc07] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:00:02.0 reg 1c 32bit mmio: [fe900000, fe9fffff] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:00:1b.0 reg 10 64bit mmio: [fea78000, fea7bfff] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:00:1d.0 reg 20 io port: [d880, d89f] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:00:1d.1 reg 20 io port: [d800, d81f] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:00:1d.2 reg 20 io port: [d480, d49f] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:00:1d.3 reg 20 io port: [d400, d41f] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:00:1d.7 reg 10 32bit mmio: [fea77c00, fea77fff] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:00:1f.2 reg 10 io port: [0, 7] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:00:1f.2 reg 14 io port: [0, 3] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:00:1f.2 reg 18 io port: [0, 7] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:00:1f.2 reg 1c io port: [0, 3] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:00:1f.2 reg 20 io port: [ffa0, ffaf] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:00:1f.3 reg 20 io port: [400, 41f] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:01:00.0 reg 10 32bit mmio: [febffc00, febfffff] Oct 14 23:28:32 vano-linux kernel: pci 0000:01:00.0: supports D1 Oct 14 23:28:32 vano-linux kernel: pci 0000:01:00.0: supports D2 Oct 14 23:28:32 vano-linux kernel: PCI: 0000:01:01.0 reg 10 io port: [ec00, ec07] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:01:01.0 reg 14 io port: [e880, e883] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:01:01.0 reg 18 io port: [e800, e807] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:01:01.0 reg 1c io port: [e480, e483] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:01:01.0 reg 20 io port: [e400, e40f] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:01:02.0 reg 10 io port: [e000, e0ff] Oct 14 23:28:32 vano-linux kernel: PCI: 0000:01:02.0 reg 14 32bit mmio: [febff800, febff8ff] Oct 14 23:28:32 vano-linux kernel: pci 0000:01:02.0: supports D1 Oct 14 23:28:32 vano-linux kernel: pci 0000:01:02.0: supports D2 Oct 14 23:28:32 vano-linux kernel: PCI: bridge 0000:00:1e.0 io port: [e000, efff] Oct 14 23:28:32 vano-linux kernel: PCI: bridge 0000:00:1e.0 32bit mmio: [feb00000, febfffff] Oct 14 23:28:32 vano-linux kernel: bus 00 -> node 0 Oct 14 23:28:32 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Oct 14 23:28:32 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Oct 14 23:28:32 vano-linux kernel: libata version 3.00 loaded. Oct 14 23:28:32 vano-linux kernel: pci 0000:00:1e.0: setting latency timer to 64 Oct 14 23:28:32 vano-linux kernel: pci 0000:00:02.0: Boot video device Oct 14 23:28:32 vano-linux kernel: Switched to high resolution mode on CPU 1 Oct 14 23:28:32 vano-linux kernel: Switched to high resolution mode on CPU 0 Oct 14 23:28:32 vano-linux kernel: ata_piix 0000:00:1f.2: version 2.12 Oct 14 23:28:32 vano-linux kernel: ata_piix 0000:00:1f.2: setting latency timer to 64 Oct 14 23:28:32 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 14 23:28:32 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 14 23:28:32 vano-linux kernel: sr 0:0:1:0: Attached scsi CD-ROM sr0 Oct 14 23:28:32 vano-linux kernel: pata_via 0000:01:01.0: version 0.3.3 Oct 14 23:28:32 vano-linux kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64 Oct 14 23:28:32 vano-linux kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64 Oct 14 23:28:32 vano-linux kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64 Oct 14 23:28:32 vano-linux kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64 Oct 14 23:28:32 vano-linux kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64 Oct 14 23:28:32 vano-linux kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64 Oct 14 23:28:32 vano-linux kernel: ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported Oct 14 23:28:32 vano-linux kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D' Oct 14 23:28:32 vano-linux kernel: usb-storage: device found at 3 Oct 14 23:28:32 vano-linux kernel: usb-storage: waiting for device to settle before scanning Oct 14 23:28:32 vano-linux kernel: irda_init() Oct 14 23:28:32 vano-linux kernel: sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 Oct 14 23:28:32 vano-linux kernel: sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 Oct 14 23:28:32 vano-linux kernel: usb-storage: device scan complete ---------------------------------- lspci -vv output: 00:00.0 Host bridge: Intel Corporation Unknown device 29c0 (rev 10) Subsystem: Intel Corporation Unknown device 29c0 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Capabilities: [e0] Vendor Specific Information 00:02.0 VGA compatible controller: Intel Corporation Unknown device 29c2 (rev 10) (prog-if 00 [VGA]) Subsystem: Intel Corporation Unknown device 29c2 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: Memory at fea80000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at dc00 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at fe900000 (32-bit, non-prefetchable) [size=1M] Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) Subsystem: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fea78000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express Unknown type IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed unknown, Width x0 Capabilities: [100] Virtual Channel Capabilities: [130] Unknown (5) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at d880 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at d800 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at d480 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at d400 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fea77c00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Subsystem: Intel Corporation 82801 PCI Bridge 00:1f.0 ISA bridge: Intel Corporation 82801GH (ICH7DH) LPC Interface Bridge (rev 01) Subsystem: Intel Corporation 82801GH (ICH7DH) LPC Interface Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [e0] Vendor Specific Information 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) (prog-if 80 [Master]) Subsystem: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Intel Corporation 82801G (ICH7 Family) SMBus Controller Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 0400 [size=32] 01:00.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01) Subsystem: Philips Semiconductors Unknown device 0000 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (3750ns min, 9500ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:01.0 RAID bus controller: VIA Technologies, Inc. VT6410 ATA133 RAID controller (rev 06) Subsystem: VIA Technologies, Inc. VT6410 ATA133 RAID controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at ec00 [size=8] Region 1: I/O ports at e880 [size=4] Region 2: I/O ports at e800 [size=8] Region 3: I/O ports at e480 [size=4] Region 4: I/O ports at e400 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RT8139 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at e000 [size=256] Region 1: Memory at febff800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- ---------------------- -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee. -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
