* Tejun Heo <tj@xxxxxxxxxx> [2008-10-14 14:51:54]:
> Hmmm.. drives usually make reset wait while they're spinning up so
> that's where the spin wait logic is implemented. Strange. Can you
> post full boot log and the result of "hdparm -I" on the drive? Also,
> if you first spin up the drive by conneciting only the power connector
> and then connect the SATA cable a bit later, does it work?
OK, The drives are placed in hotswap-cages in an external enclosure with
it's own powersupply. I have no possibility to connect the power to the
actual drive before signal when I'm hotswapping. I don't think that'll
make a difference though, since I have the same issue when I do a "cold
boot".
With "cold boot" I mean that I turn the power on the enclosure first and
then boot the PC. With a "warm boot" I reboot the PC a second time
without powercycling the disc enclosure or the discs.
When I boot the first drive on the PMP is detected by the Sil3124. If
it's a "cold boot", the second drive is not detected in Linux with the
same error as when I hotplug the drive.
When I "warm boot" everything detects and is fine until I hotplug a
disc.
Attached is dmesg from cold and warm boot, and hdparm -I on one of the
disks.
BR,
/LM
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-xen-amd64 (Debian 2.6.26-8) (waldi@xxxxxxxxxx) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Oct 9 17:11:22 UTC 2008
[ 0.000000] Command line: root=/dev/mapper/cleopatra-root ro console=tty0 elevator=deadline
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 0000000080800000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 526336) 0 entries of 256 used
[ 0.000000] max_pfn_mapped = 526336
[ 0.000000] init_memory_mapping
[ 0.000000] DMI present.
[ 0.000000] Entering add_active_range(0, 0, 526336) 0 entries of 256 used
[ 0.000000] early res: 0 [200000-631917] TEXT DATA BSS
[ 0.000000] early res: 1 [632000-1f53fff] Xen provided
[ 0.000000] early res: 2 [1f54000-1f55fff] INITMAP
[ 0.000000] early res: 3 [1f56000-235efff] PGTABLE
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 526336
[ 0.000000] On node 0 totalpages: 526336
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4040 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7140 pages used for memmap
[ 0.000000] DMA32 zone: 515100 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: RSDP 000F5F00, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT DFEE3831, 003C (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP DFEE9E70, 0074 (r1 INTEL 6040000 PTL 3)
[ 0.000000] ACPI: DSDT DFEE4C59, 5217 (r1 INTEL GLENWOOD 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS DFEEAFC0, 0040
[ 0.000000] ACPI: MCFG DFEE9EE4, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: HPET DFEE9F20, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
[ 0.000000] ACPI: APIC DFEE9F58, 0080 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT DFEE9FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT DFEE386D, 13EC (r1 PmRef CpuPm 3000 INTL 20050228)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 0, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfecc0400] gsi_base[48])
[ 0.000000] IOAPIC[2]: apic_id 4, version 0, address 0xfecc0400, GSI 48-71
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to xen
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at e1000000 (gap: e0000000:10000000)
[ 0.000000] PERCPU: Allocating 22192 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519140
[ 0.000000] Kernel command line: root=/dev/mapper/cleopatra-root ro console=tty0 elevator=deadline
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Xen reported: 2394.012 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] console [xvc-1] enabled
[ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004000] Software IO TLB enabled:
[ 0.004000] Aperture: 64 megabytes
[ 0.004000] Kernel range: ffff88000438f000 - ffff88000838f000
[ 0.004000] Address size: 27 bits
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Memory: 1964436k/2105344k available (2277k kernel code, 132504k reserved, 1021k data, 216k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.788053] Calibrating delay using timer specific routine.. 4790.06 BogoMIPS (lpj=9580137)
[ 0.788262] Security Framework initialized
[ 0.788353] SELinux: Disabled at boot.
[ 0.788440] Capability LSM initialized
[ 0.788540] Mount-cache hash table entries: 256
[ 0.788756] Initializing cgroup subsys ns
[ 0.788845] Initializing cgroup subsys cpuacct
[ 0.788932] Initializing cgroup subsys devices
[ 0.789043] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.789193] CPU: L2 cache: 4096K
[ 0.789280] CPU: Physical Processor ID: 0
[ 0.789365] CPU: Processor Core ID: 0
[ 0.789461] ACPI: Core revision 20080321
[ 0.797499] Brought up 2 CPUs
[ 0.797499] Initializing CPU#1
[ 0.797499] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.797499] CPU: L2 cache: 4096K
[ 0.797499] CPU: Physical Processor ID: 0
[ 0.797499] CPU: Processor Core ID: 1
[ 0.798030] CPU0 attaching sched-domain:
[ 0.798033] domain 0: span 0-1
[ 0.798035] groups: 0 1
[ 0.798038] CPU1 attaching sched-domain:
[ 0.798040] domain 0: span 0-1
[ 0.798041] groups: 1 0
[ 0.800137] net_namespace: 1224 bytes
[ 0.800374] NET: Registered protocol family 16
[ 0.800734] ACPI: bus type pci registered
[ 0.800917] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 19
[ 0.801009] PCI: MCFG area at f0000000 reserved in E820
[ 0.802447] PCI: Using MMCONFIG at f0000000 - f13fffff
[ 0.802536] PCI: Using configuration type 1 for base access
[ 0.805382] ACPI: EC: Look up EC in DSDT
[ 0.808052] ACPI: Interpreter enabled
[ 0.808139] ACPI: (supports S0 S1 S5)
[ 0.808421] ACPI: Using IOAPIC for interrupt routing
[ 0.813075] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.814329] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.814440] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.814785] pci 0000:01:00.0: PXH quirk detected; SHPC device MSI disabled
[ 0.815053] pci 0000:01:00.2: PXH quirk detected; SHPC device MSI disabled
[ 0.816582] PCI: Transparent bridge - 0000:00:1e.0
[ 0.816727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.816940] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DEV1.PXHA._PRT]
[ 0.817101] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DEV1.PXHB._PRT]
[ 0.817269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.817364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.817425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
[ 0.817485] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.822117] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 11 14 15) *7
[ 0.822117] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 *11 14 15)
[ 0.822735] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 11 14 15) *5
[ 0.823410] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 *11 14 15)
[ 0.824024] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
[ 0.824788] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled.
[ 0.825546] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled.
[ 0.826311] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *10 11 14 15)
[ 0.830115] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.830115] pnp: PnP ACPI init
[ 0.830115] ACPI: bus type pnp registered
[ 0.830115] pnp 00:00: parse allocated resources
[ 0.830115] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.830115] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.830115] pnp 00:01: parse allocated resources
[ 0.830115] pnp 00:01: add io 0x10-0x1f flags 0x1
[ 0.830115] pnp 00:01: add io 0x24-0x25 flags 0x1
[ 0.830115] pnp 00:01: add io 0x28-0x29 flags 0x1
[ 0.830115] pnp 00:01: add io 0x2c-0x2d flags 0x1
[ 0.830115] pnp 00:01: add io 0x30-0x31 flags 0x1
[ 0.830115] pnp 00:01: add io 0x34-0x35 flags 0x1
[ 0.830115] pnp 00:01: add io 0x38-0x39 flags 0x1
[ 0.830115] pnp 00:01: add io 0x3c-0x3d flags 0x1
[ 0.830115] pnp 00:01: add io 0x72-0x77 flags 0x1
[ 0.830115] pnp 00:01: add io 0x80-0x80 flags 0x1
[ 0.830115] pnp 00:01: add io 0x90-0x9f flags 0x1
[ 0.830115] pnp 00:01: add io 0xa4-0xa5 flags 0x1
[ 0.830115] pnp 00:01: add io 0xa8-0xa9 flags 0x1
[ 0.830115] pnp 00:01: add io 0xac-0xad flags 0x1
[ 0.830115] pnp 00:01: add io 0xb0-0xb5 flags 0x1
[ 0.830115] pnp 00:01: add io 0xb8-0xb9 flags 0x1
[ 0.830115] pnp 00:01: add io 0xbc-0xbd flags 0x1
[ 0.830115] pnp 00:01: add io 0x295-0x296 flags 0x1
[ 0.830115] pnp 00:01: add io 0x800-0x83f flags 0x1
[ 0.830115] pnp 00:01: add io 0x900-0x90f flags 0x1
[ 0.830115] pnp 00:01: add io 0x1000-0x107f flags 0x1
[ 0.830115] pnp 00:01: add io 0x1180-0x11bf flags 0x1
[ 0.830115] pnp 00:01: add io 0x2e-0x2f flags 0x1
[ 0.830115] pnp 00:01: add io 0x4d0-0x4d1 flags 0x1
[ 0.830115] pnp 00:01: add io 0xfe00-0xfe00 flags 0x1
[ 0.830115] pnp 00:01: add mem 0xfed14000-0xfed17fff flags 0x1
[ 0.830115] pnp 00:01: add mem 0xfed13000-0xfed13fff flags 0x1
[ 0.830115] pnp 00:01: add mem 0xfed18000-0xfed1bfff flags 0x1
[ 0.830115] pnp 00:01: add mem 0xf0000000-0xf3ffffff flags 0x1
[ 0.830115] pnp 00:01: add mem 0xfed20000-0xfed8ffff flags 0x1
[ 0.830115] pnp 00:01: add mem 0xfef00000-0xfeffffff flags 0x1
[ 0.830115] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.830115] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.830115] pnp 00:02: parse allocated resources
[ 0.830115] pnp 00:02: add io 0x0-0xf flags 0x1
[ 0.830115] pnp 00:02: add io 0x81-0x8f flags 0x1
[ 0.830115] pnp 00:02: add io 0xc0-0xdf flags 0x1
[ 0.830115] pnp 00:02: add dma 4 flags 0x2
[ 0.830115] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.830115] pnp 00:03: parse allocated resources
[ 0.830115] pnp 00:03: add io 0xf0-0xfe flags 0x1
[ 0.830115] pnp 00:03: add irq 13 flags 0x1
[ 0.830115] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.830115] pnp 00:04: parse allocated resources
[ 0.830115] pnp 00:04: add io 0x70-0x71 flags 0x1
[ 0.830115] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.830115] pnp 00:05: parse allocated resources
[ 0.830115] pnp 00:05: add io 0x61-0x61 flags 0x1
[ 0.830115] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.830115] pnp 00:06: parse allocated resources
[ 0.830115] pnp 00:06: add irq 8 flags 0x1
[ 0.830115] pnp 00:06: add mem 0xfed00000-0xfed003ff flags 0x0
[ 0.830115] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.830115] pnp 00:07: parse allocated resources
[ 0.830115] pnp 00:07: add mem 0xff800000-0xffffffff flags 0x0
[ 0.830115] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.830115] pnp 00:08: parse allocated resources
[ 0.830115] pnp 00:08: add io 0x60-0x60 flags 0x1
[ 0.830115] pnp 00:08: add io 0x64-0x64 flags 0x1
[ 0.830115] pnp 00:08: add irq 1 flags 0x1
[ 0.830115] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.830115] pnp 00:09: parse allocated resources
[ 0.830115] pnp 00:09: add irq 12 flags 0x1
[ 0.830115] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 PNP0f13 (active)
[ 0.830115] pnp 00:0a: parse allocated resources
[ 0.830115] pnp 00:0a: add io 0x3f8-0x3ff flags 0x1
[ 0.830115] pnp 00:0a: add irq 4 flags 0x1
[ 0.830115] pnp 00:0a: parse resource options
[ 0.830115] pnp 00:0a: new independent option
[ 0.830115] pnp 00:0a: new dependent option (priority 0x0)
[ 0.830115] pnp 00:0a: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.830115] pnp 00:0a: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.830115] pnp 00:0a: new dependent option (priority 0x1)
[ 0.830115] pnp 00:0a: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.830115] pnp 00:0a: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.830115] pnp 00:0a: new dependent option (priority 0x1)
[ 0.830115] pnp 00:0a: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.830115] pnp 00:0a: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.830115] pnp 00:0a: new dependent option (priority 0x1)
[ 0.830115] pnp 00:0a: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.830115] pnp 00:0a: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.830115] pnp 00:0a: new dependent option (priority 0x2)
[ 0.830115] pnp 00:0a: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.830115] pnp 00:0a: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.830115] pnp 00:0a: new dependent option (priority 0x2)
[ 0.830115] pnp 00:0a: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.830115] pnp 00:0a: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.830115] pnp 00:0a: new dependent option (priority 0x2)
[ 0.830115] pnp 00:0a: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.830115] pnp 00:0a: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.830115] pnp 00:0a: new dependent option (priority 0x2)
[ 0.830115] pnp 00:0a: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.830115] pnp 00:0a: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.830115] pnp 00:0a: end dependent options
[ 0.830115] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.830115] pnp 00:0b: parse allocated resources
[ 0.830115] pnp 00:0b: add io 0x2f8-0x2ff flags 0x1
[ 0.830126] pnp 00:0b: add irq 3 flags 0x1
[ 0.830127] pnp 00:0b: parse resource options
[ 0.830129] pnp 00:0b: new independent option
[ 0.830137] pnp 00:0b: new dependent option (priority 0x1)
[ 0.830139] pnp 00:0b: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.830142] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.830145] pnp 00:0b: new dependent option (priority 0x0)
[ 0.830147] pnp 00:0b: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.830150] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.830152] pnp 00:0b: new dependent option (priority 0x1)
[ 0.830155] pnp 00:0b: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.830158] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.830160] pnp 00:0b: new dependent option (priority 0x1)
[ 0.830162] pnp 00:0b: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.830165] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.830168] pnp 00:0b: new dependent option (priority 0x2)
[ 0.830170] pnp 00:0b: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.830173] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.830175] pnp 00:0b: new dependent option (priority 0x2)
[ 0.830177] pnp 00:0b: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.830180] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.830183] pnp 00:0b: new dependent option (priority 0x2)
[ 0.830185] pnp 00:0b: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.830188] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.830190] pnp 00:0b: new dependent option (priority 0x2)
[ 0.830192] pnp 00:0b: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.830195] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.830198] pnp 00:0b: end dependent options
[ 0.830244] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.830369] pnp 00:0c: parse allocated resources
[ 0.830640] pnp 00:0c: add io 0x3f0-0x3f5 flags 0x1
[ 0.830643] pnp 00:0c: add io 0x3f7-0x3f7 flags 0x1
[ 0.830647] pnp 00:0c: add irq 6 flags 0x1
[ 0.830649] pnp 00:0c: add dma 2 flags 0x0
[ 0.830650] pnp 00:0c: parse resource options
[ 0.830652] pnp 00:0c: new independent option
[ 0.830657] pnp 00:0c: new dependent option (priority 0x0)
[ 0.830659] pnp 00:0c: io min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1
[ 0.830661] pnp 00:0c: io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1
[ 0.830665] pnp 00:0c: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000040 flags 0x1
[ 0.830667] pnp 00:0c: dma bitmask 0x4 flags 0x0
[ 0.830669] pnp 00:0c: new dependent option (priority 0x0)
[ 0.830671] pnp 00:0c: io min 0x370 max 0x370 align 1 size 6 flags 0x1
[ 0.830673] pnp 00:0c: io min 0x377 max 0x377 align 1 size 1 flags 0x1
[ 0.830676] pnp 00:0c: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000040 flags 0x1
[ 0.830679] pnp 00:0c: dma bitmask 0x4 flags 0x0
[ 0.830680] pnp 00:0c: end dependent options
[ 0.830728] pnp 00:0c: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.830888] pnp: PnP ACPI: found 13 devices
[ 0.830979] ACPI: ACPI bus type pnp unregistered
[ 0.831097] xen_mem: Initialising balloon driver.
[ 0.834114] usbcore: registered new interface driver usbfs
[ 0.834114] usbcore: registered new interface driver hub
[ 0.834114] usbcore: registered new device driver usb
[ 0.834115] PCI: Using ACPI for IRQ routing
[ 0.834115] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[ 0.840313] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[ 0.840405] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[ 0.878197] ACPI: RTC can wake from S4
[ 0.889989] pnp: the driver 'system' has been registered
[ 0.890008] system 00:01: ioport range 0x295-0x296 has been reserved
[ 0.890113] system 00:01: ioport range 0x800-0x83f has been reserved
[ 0.890197] system 00:01: ioport range 0x900-0x90f has been reserved
[ 0.890197] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.890197] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 0.890197] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.890197] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 0.890197] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.890197] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
[ 0.890197] system 00:01: iomem range 0xfed18000-0xfed1bfff has been reserved
[ 0.890197] system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 0.890197] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.890197] system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved
[ 0.890197] system 00:01: driver attached
[ 0.890197] PCI: Failed to allocate mem resource #9:100000@e1800000 for 0000:01:00.2
[ 0.890197] PCI: Bridge: 0000:01:00.0
[ 0.890197] IO window: 4000-4fff
[ 0.890197] MEM window: 0xe0200000-0xe02fffff
[ 0.890197] PREFETCH window: 0x00000000e1000000-0x00000000e17fffff
[ 0.890197] PCI: Bridge: 0000:01:00.2
[ 0.890197] IO window: 5000-5fff
[ 0.890197] MEM window: 0xe0300000-0xe03fffff
[ 0.890197] PREFETCH window: disabled.
[ 0.890197] PCI: Bridge: 0000:00:01.0
[ 0.890197] IO window: 4000-5fff
[ 0.890197] MEM window: 0xe0100000-0xe03fffff
[ 0.890197] PREFETCH window: 0x00000000e1000000-0x00000000e17fffff
[ 0.890197] PCI: Bridge: 0000:00:1c.0
[ 0.890197] IO window: disabled.
[ 0.890197] MEM window: disabled.
[ 0.890197] PREFETCH window: disabled.
[ 0.890197] PCI: Bridge: 0000:00:1c.4
[ 0.890197] IO window: 6000-6fff
[ 0.890197] MEM window: 0xe0400000-0xe04fffff
[ 0.890197] PREFETCH window: disabled.
[ 0.890197] PCI: Bridge: 0000:00:1c.5
[ 0.890197] IO window: 7000-7fff
[ 0.895446] MEM window: 0xe0500000-0xe05fffff
[ 0.895540] PREFETCH window: disabled.
[ 0.895637] PCI: Bridge: 0000:00:1e.0
[ 0.895727] IO window: 8000-8fff
[ 0.895820] MEM window: 0xe0600000-0xe06fffff
[ 0.895914] PREFETCH window: 0x00000000e8000000-0x00000000efffffff
[ 0.896041] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.896222] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.896252] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 0.896282] PCI: Setting latency timer of device 0000:01:00.2 to 64
[ 0.896315] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.896498] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.896529] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.896710] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.896741] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.896921] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.896940] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.896973] NET: Registered protocol family 2
[ 0.943648] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.944058] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.945552] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.946209] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.946300] TCP reno registered
[ 0.955754] NET: Registered protocol family 1
[ 0.955960] checking if image is initramfs... it is
[ 0.975589] Freeing initrd memory: 21558k freed
[ 0.984084] Simple Boot Flag at 0x38 set to 0x1
[ 0.986562] audit: initializing netlink socket (disabled)
[ 0.986562] type=2000 audit(1224002821.976:1): initialized
[ 0.986562] VFS: Disk quotas dquot_6.5.1
[ 0.986562] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.986562] msgmni has been set to 4138
[ 0.986562] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.986562] io scheduler noop registered
[ 0.986562] io scheduler anticipatory registered
[ 0.986562] io scheduler deadline registered (default)
[ 0.986562] io scheduler cfq registered
[ 0.986562] pci 0000:14:04.0: Boot video device
[ 0.986562] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.986562] assign_interrupt_mode Found MSI capability
[ 0.986562] no ownder
[ 0.986562] map irq failed
[ 0.986562] Allocate Port Service[0000:00:01.0:pcie00]
[ 0.986562] Allocate Port Service[0000:00:01.0:pcie03]
[ 0.986562] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.986562] assign_interrupt_mode Found MSI capability
[ 0.986562] no ownder
[ 0.986653] map irq failed
[ 0.987908] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.988343] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.988747] Allocate Port Service[0000:00:1c.0:pcie03]
[ 0.989217] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.989283] assign_interrupt_mode Found MSI capability
[ 0.989411] no ownder
[ 0.989496] map irq failed
[ 0.989582] Allocate Port Service[0000:00:1c.4:pcie00]
[ 0.990904] Allocate Port Service[0000:00:1c.4:pcie02]
[ 0.991722] Allocate Port Service[0000:00:1c.4:pcie03]
[ 0.991722] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.991722] assign_interrupt_mode Found MSI capability
[ 0.991722] no ownder
[ 0.991722] map irq failed
[ 0.991722] Allocate Port Service[0000:00:1c.5:pcie00]
[ 0.991722] Allocate Port Service[0000:00:1c.5:pcie02]
[ 0.991722] Allocate Port Service[0000:00:1c.5:pcie03]
[ 0.995722] Linux agpgart interface v0.103
[ 0.995722] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.995722] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.995722] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.995722] pnp: the driver 'serial' has been registered
[ 0.995722] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.995722] serial 00:0a: driver attached
[ 0.995722] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.995722] serial 00:0b: driver attached
[ 0.995722] brd: module loaded
[ 0.995722] input: Macintosh mouse button emulation as /class/input/input0
[ 0.995954] Xen virtual console successfully installed as xvc0
[ 0.996794] Event-channel device installed.
[ 0.999723] netfront: Initialising virtual ethernet driver.
[ 0.999723] pnp: the driver 'i8042 kbd' has been registered
[ 0.999723] i8042 kbd 00:08: driver attached
[ 0.999723] pnp: the driver 'i8042 aux' has been registered
[ 0.999723] i8042 aux 00:09: driver attached
[ 0.999723] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.002835] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.002931] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.030935] mice: PS/2 mouse device common for all mice
[ 1.031218] pnp: the driver 'rtc_cmos' has been registered
[ 1.031399] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.031512] rtc0: alarms up to one month, y3k
[ 1.031602] rtc_cmos 00:04: driver attached
[ 1.031765] No iBFT detected.
[ 1.032107] TCP cubic registered
[ 1.032107] NET: Registered protocol family 17
[ 1.032107] registered taskstats version 1
[ 1.032107] rtc_cmos 00:04: setting system clock to 2008-10-14 16:47:02 UTC (1224002822)
[ 1.032107] Freeing unused kernel memory: 216k freed
[ 1.052730] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.134498] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.136134] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.136545] ACPI: ACPI0007:02 is registered as cooling_device2
[ 1.136953] ACPI: ACPI0007:03 is registered as cooling_device3
[ 1.137360] ACPI: ACPI0007:04 is registered as cooling_device4
[ 1.137769] ACPI: ACPI0007:05 is registered as cooling_device5
[ 1.138179] ACPI: ACPI0007:06 is registered as cooling_device6
[ 1.138585] ACPI: ACPI0007:07 is registered as cooling_device7
[ 1.402389] SCSI subsystem initialized
[ 1.403304] 3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
[ 1.403461] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 24 (level, low) -> IRQ 24
[ 1.405473] No dock devices found.
[ 1.413656] libata version 3.00 loaded.
[ 1.426215] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
[ 1.426315] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.431707] USB Universal Host Controller Interface driver v3.0
[ 1.518256] floppy0: Unable to grab DMA2 for the floppy driver
[ 1.544618] FDC 0 is a post-1991 82077
[ 1.632660] scsi0 : 3ware 9000 Storage Controller
[ 1.632853] 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xe0200000, IRQ: 24.
[ 1.968585] 3w-9xxx: scsi0: Firmware FE9X 2.08.00.009, BIOS BE9X 2.03.01.052, Ports: 12.
[ 1.969625] sata_sil24 0000:03:01.0: version 1.1
[ 1.969983] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 48 (level, low) -> IRQ 48
[ 1.970179] sata_sil24 0000:03:01.0: Applying completion IRQ loss on PCI-X errata fix
[ 1.970684] scsi1 : sata_sil24
[ 1.970810] scsi2 : sata_sil24
[ 1.970932] scsi3 : sata_sil24
[ 1.971052] scsi4 : sata_sil24
[ 1.971163] ata1: SATA max UDMA/100 host m128@0xe0308000 port 0xe0300000 irq 48
[ 1.971274] ata2: SATA max UDMA/100 host m128@0xe0308000 port 0xe0302000 irq 48
[ 1.971384] ata3: SATA max UDMA/100 host m128@0xe0308000 port 0xe0304000 irq 48
[ 1.971495] ata4: SATA max UDMA/100 host m128@0xe0308000 port 0xe0306000 irq 48
[ 1.972714] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 1.972714] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1.972714] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.972714] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.972714] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003000
[ 1.972714] usb usb1: configuration #1 chosen from 1 choice
[ 1.972714] hub 1-0:1.0: USB hub found
[ 1.972714] hub 1-0:1.0: 2 ports detected
[ 2.073496] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.073604] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.073729] usb usb1: Product: UHCI Host Controller
[ 2.073818] usb usb1: Manufacturer: Linux 2.6.26-1-xen-amd64 uhci_hcd
[ 2.073909] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.074101] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 2.074284] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.074288] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.074413] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.074551] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003020
[ 2.081305] usb usb2: configuration #1 chosen from 1 choice
[ 2.081416] hub 2-0:1.0: USB hub found
[ 2.081510] hub 2-0:1.0: 2 ports detected
[ 2.186026] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.186132] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.186255] usb usb2: Product: UHCI Host Controller
[ 2.186343] usb usb2: Manufacturer: Linux 2.6.26-1-xen-amd64 uhci_hcd
[ 2.186433] usb usb2: SerialNumber: 0000:00:1d.1
[ 2.187777] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 2.187955] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.187959] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.188080] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.188216] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 2.188376] usb usb3: configuration #1 chosen from 1 choice
[ 2.188485] hub 3-0:1.0: USB hub found
[ 2.188579] hub 3-0:1.0: 2 ports detected
[ 2.291019] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.291125] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.291249] usb usb3: Product: UHCI Host Controller
[ 2.291336] usb usb3: Manufacturer: Linux 2.6.26-1-xen-amd64 uhci_hcd
[ 2.291426] usb usb3: SerialNumber: 0000:00:1d.2
[ 2.292772] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 2.292949] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 2.292953] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.293074] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 2.293211] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003060
[ 2.293269] usb usb4: configuration #1 chosen from 1 choice
[ 2.293269] hub 4-0:1.0: USB hub found
[ 2.293269] hub 4-0:1.0: 2 ports detected
[ 2.394870] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.394977] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.395100] usb usb4: Product: UHCI Host Controller
[ 2.395188] usb usb4: Manufacturer: Linux 2.6.26-1-xen-amd64 uhci_hcd
[ 2.395278] usb usb4: SerialNumber: 0000:00:1d.3
[ 2.397313] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 2.397505] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.397510] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.397636] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 2.401659] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.401756] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 2.401760] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0000000
[ 2.416650] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.416837] usb usb5: configuration #1 chosen from 1 choice
[ 2.416969] hub 5-0:1.0: USB hub found
[ 2.417067] hub 5-0:1.0: 8 ports detected
[ 2.520759] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.520870] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.520994] usb usb5: Product: EHCI Host Controller
[ 2.521084] usb usb5: Manufacturer: Linux 2.6.26-1-xen-amd64 ehci_hcd
[ 2.521177] usb usb5: SerialNumber: 0000:00:1d.7
[ 4.084772] ata1: SATA link down (SStatus 0 SControl 0)
[ 6.196947] ata2: SATA link down (SStatus 0 SControl 0)
[ 8.340912] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 8.341049] ata3.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
[ 8.356999] ata3.00: hard resetting link
[ 8.693037] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 8.693149] ata3.01: hard resetting link
[ 9.029033] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.029145] ata3.02: hard resetting link
[ 9.364951] ata3.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.365064] ata3.03: hard resetting link
[ 9.700966] ata3.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.701079] ata3.04: hard resetting link
[ 10.036928] ata3.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 10.037040] ata3.05: hard resetting link
[ 10.372938] ata3.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[ 10.380748] ata3.00: FORCE: horkage modified (noncq)
[ 10.380910] ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01112, max UDMA7
[ 10.381021] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (not used)
[ 10.387354] ata3.00: configured for UDMA/100
[ 10.393983] ata3.01: FORCE: horkage modified (noncq)
[ 10.394145] ata3.01: ATA-7: SAMSUNG HD103UJ, 1AA01112, max UDMA7
[ 10.394248] ata3.01: 1953525168 sectors, multi 0: LBA48 NCQ (not used)
[ 10.400756] ata3.01: configured for UDMA/100
[ 10.407119] ata3.02: FORCE: horkage modified (noncq)
[ 10.407279] ata3.02: ATA-7: SAMSUNG HD103UJ, 1AA01112, max UDMA7
[ 10.407391] ata3.02: 1953525168 sectors, multi 0: LBA48 NCQ (not used)
[ 10.413894] ata3.02: configured for UDMA/100
[ 10.420249] ata3.03: FORCE: horkage modified (noncq)
[ 10.420410] ata3.03: ATA-7: SAMSUNG HD103UJ, 1AA01112, max UDMA7
[ 10.420521] ata3.03: 1953525168 sectors, multi 0: LBA48 NCQ (not used)
[ 10.427013] ata3.03: configured for UDMA/100
[ 10.433387] ata3.04: FORCE: horkage modified (noncq)
[ 10.433547] ata3.04: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 10.433650] ata3.04: 1953525168 sectors, multi 0: LBA48 NCQ (not used)
[ 10.439892] ata3.04: configured for UDMA/100
[ 10.440027] ata3: EH complete
[ 12.550294] ata4: SATA link down (SStatus 0 SControl 0)
[ 12.550489] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 12.550719] scsi 3:1:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 12.550917] scsi 3:2:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 12.551115] scsi 3:3:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 12.551313] scsi 3:4:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 12.552827] ACPI: PCI Interrupt 0000:12:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 12.552827] PCI: Setting latency timer of device 0000:12:00.0 to 64
[ 12.568654] Driver 'sd' needs updating - please use bus_type methods
[ 12.568654] sd 3:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
[ 12.568654] sd 3:0:0:0: [sda] Write Protect is off
[ 12.568654] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 12.568654] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.568654] sd 3:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
[ 12.568654] sd 3:0:0:0: [sda] Write Protect is off
[ 12.568654] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 12.568654] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.568654] sda: sda1 sda2
[ 12.591301] sd 3:0:0:0: [sda] Attached SCSI disk
[ 12.591438] sd 3:1:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 12.591558] sd 3:1:0:0: [sdb] Write Protect is off
[ 12.591650] sd 3:1:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 12.591668] sd 3:1:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.591816] sd 3:1:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 12.591935] sd 3:1:0:0: [sdb] Write Protect is off
[ 12.592026] sd 3:1:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 12.592044] sd 3:1:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.592157] sdb: sdb1 sdb2
[ 12.606434] sd 3:1:0:0: [sdb] Attached SCSI disk
[ 12.606441] sd 3:2:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
[ 12.606561] sd 3:2:0:0: [sdc] Write Protect is off
[ 12.606652] sd 3:2:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 12.606670] sd 3:2:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.606816] sd 3:2:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
[ 12.606935] sd 3:2:0:0: [sdc] Write Protect is off
[ 12.607027] sd 3:2:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 12.607045] sd 3:2:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.607158] sdc: sdc1 sdc2
[ 12.622303] sd 3:2:0:0: [sdc] Attached SCSI disk
[ 12.622303] sd 3:3:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
[ 12.622303] sd 3:3:0:0: [sdd] Write Protect is off
[ 12.622635] sd 3:3:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 12.622654] sd 3:3:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.622798] sd 3:3:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
[ 12.622918] sd 3:3:0:0: [sdd] Write Protect is off
[ 12.623009] sd 3:3:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 12.623027] sd 3:3:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.623141] sdd: sdd1 sdd2
[ 12.634020] sd 3:3:0:0: [sdd] Attached SCSI disk
[ 12.634146] sd 3:4:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
[ 12.634266] sd 3:4:0:0: [sde] Write Protect is off
[ 12.634357] sd 3:4:0:0: [sde] Mode Sense: 00 3a 00 00
[ 12.634375] sd 3:4:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.634467] sd 3:4:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
[ 12.634592] sd 3:4:0:0: [sde] Write Protect is off
[ 12.634692] sd 3:4:0:0: [sde] Mode Sense: 00 3a 00 00
[ 12.634711] sd 3:4:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.634823] sde: sde1 sde2
[ 12.648639] sd 3:4:0:0: [sde] Attached SCSI disk
[ 12.674483] eth0: (PCI Express:2.5GB/s:Width x1) 00:30:48:8f:59:b6
[ 12.674812] eth0: Intel(R) PRO/1000 Network Connection
[ 12.675076] eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
[ 12.675240] ACPI: PCI Interrupt 0000:13:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 12.675433] PCI: Setting latency timer of device 0000:13:00.0 to 64
[ 12.801251] eth1: (PCI Express:2.5GB/s:Width x1) 00:30:48:8f:59:b7
[ 12.801353] eth1: Intel(R) PRO/1000 Network Connection
[ 12.801511] eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff
[ 12.804898] ata_piix 0000:00:1f.2: version 2.12
[ 12.804931] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 12.805119] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 12.971325] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 12.971899] scsi5 : ata_piix
[ 12.972545] scsi6 : ata_piix
[ 12.973391] ata5: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30a0 irq 14
[ 12.973484] ata6: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30a8 irq 15
[ 13.136414] ata5.00: FORCE: horkage modified (noncq)
[ 13.138356] ata5.00: ATA-8: SAMSUNG HM121HI, LZ100-08, max UDMA7
[ 13.138460] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (not used)
[ 13.154277] ata5.00: configured for UDMA/133
[ 13.316425] ata6.00: FORCE: horkage modified (noncq)
[ 13.318362] ata6.00: ATA-8: SAMSUNG HM121HI, LZ100-08, max UDMA7
[ 13.318466] ata6.00: 234441648 sectors, multi 16: LBA48 NCQ (not used)
[ 13.334269] ata6.00: configured for UDMA/133
[ 13.334463] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HM121HI LZ10 PQ: 0 ANSI: 5
[ 13.334654] sd 5:0:0:0: [sdf] 234441648 512-byte hardware sectors (120034 MB)
[ 13.334760] sd 5:0:0:0: [sdf] Write Protect is off
[ 13.334851] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 13.334869] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 13.335023] sd 5:0:0:0: [sdf] 234441648 512-byte hardware sectors (120034 MB)
[ 13.335030] sd 5:0:0:0: [sdf] Write Protect is off
[ 13.335030] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 13.335030] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 13.335030] sdf: sdf1 sdf2
[ 13.931999] sd 5:0:0:0: [sdf] Attached SCSI disk
[ 13.932162] scsi 6:0:0:0: Direct-Access ATA SAMSUNG HM121HI LZ10 PQ: 0 ANSI: 5
[ 13.932329] sd 6:0:0:0: [sdg] 234441648 512-byte hardware sectors (120034 MB)
[ 13.932434] sd 6:0:0:0: [sdg] Write Protect is off
[ 13.932525] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[ 13.932543] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 13.932690] sd 6:0:0:0: [sdg] 234441648 512-byte hardware sectors (120034 MB)
[ 13.932795] sd 6:0:0:0: [sdg] Write Protect is off
[ 13.932886] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[ 13.932903] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 13.933017] sdg: sdg1 sdg2
[ 14.570553] sd 6:0:0:0: [sdg] Attached SCSI disk
[ 14.577082] Uniform Multi-Platform E-IDE driver
[ 14.577082] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 14.807015] md: raid1 personality registered for level 1
[ 14.811907] xor: automatically using best checksumming function: generic_sse
[ 14.828986] generic_sse: 5708.000 MB/sec
[ 14.828988] xor: using function: generic_sse (5708.000 MB/sec)
[ 14.830490] async_tx: api initialized (async)
[ 14.900184] raid6: int64x1 2224 MB/s
[ 14.968199] raid6: int64x2 3011 MB/s
[ 15.036212] raid6: int64x4 2640 MB/s
[ 15.104225] raid6: int64x8 1718 MB/s
[ 15.172246] raid6: sse2x1 3278 MB/s
[ 15.240263] raid6: sse2x2 3458 MB/s
[ 15.308276] raid6: sse2x4 7026 MB/s
[ 15.308276] raid6: using algorithm sse2x4 (7026 MB/s)
[ 15.308344] md: raid6 personality registered for level 6
[ 15.308435] md: raid5 personality registered for level 5
[ 15.308527] md: raid4 personality registered for level 4
[ 15.323279] md: md0 stopped.
[ 15.335116] md: bind<sdg1>
[ 15.336052] md: bind<sdf1>
[ 15.343167] raid1: raid set md0 active with 2 out of 2 mirrors
[ 15.345281] md0: bitmap initialized from disk: read 4/4 pages, set 0 bits
[ 15.345373] created bitmap (61 pages) for device md0
[ 15.398448] md: md1 stopped.
[ 15.430427] md: bind<sdg2>
[ 15.430745] md: bind<sdf2>
[ 15.437979] raid1: raid set md1 active with 2 out of 2 mirrors
[ 15.445315] md1: bitmap initialized from disk: read 14/14 pages, set 82 bits
[ 15.445421] created bitmap (223 pages) for device md1
[ 15.514327] md: md2 stopped.
[ 15.516073] md: md4 stopped.
[ 15.553178] md: md3 stopped.
[ 15.629129] device-mapper: uevent: version 1.0.3
[ 15.629129] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx
[ 15.845439] kjournald starting. Commit interval 5 seconds
[ 15.845554] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.695612] udevd version 125 started
[ 18.386357] EDAC MC: Ver: 2.1.0 Oct 9 2008
[ 18.387685] EDAC MC0: Giving out device to 'i3000_edac' 'i3000': DEV 0000:00:00.0
[ 18.387812] EDAC PCI0: Giving out device to module 'i3000_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[ 18.442301] input: Power Button (FF) as /class/input/input2
[ 18.474192] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 18.488487] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.510587] ACPI: Power Button (FF) [PWRF]
[ 18.510759] input: Power Button (CM) as /class/input/input3
[ 18.574941] ACPI: Power Button (CM) [PWRB]
[ 18.785352] intel_rng: FWH not detected
[ 18.817877] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 18.832969] input: PC Speaker as /class/input/input4
[ 18.853427] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 19.337047] input: ImExPS/2 Generic Explorer Mouse as /class/input/input5
[ 19.363849] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x1060)
[ 19.363849] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 21.122217] EXT3 FS on dm-0, internal journal
[ 22.430017] loop: module loaded
[ 22.505335] md: md2 stopped.
[ 22.575811] md: md4 stopped.
[ 22.739161] md: bind<sdb2>
[ 22.739395] md: bind<sdc2>
[ 22.739622] md: bind<sdd2>
[ 22.741955] md: bind<sde2>
[ 22.742210] md: bind<sda2>
[ 22.833279] raid5: device sda2 operational as raid disk 0
[ 22.833374] raid5: device sde2 operational as raid disk 4
[ 22.833466] raid5: device sdd2 operational as raid disk 3
[ 22.833557] raid5: device sdc2 operational as raid disk 2
[ 22.833648] raid5: device sdb2 operational as raid disk 1
[ 22.833764] raid5: allocated 5324kB for md11
[ 22.833764] raid5: raid level 5 set md11 active with 5 out of 5 devices, algorithm 2
[ 22.833764] RAID5 conf printout:
[ 22.833764] --- rd:5 wd:5
[ 22.833764] disk 0, o:1, dev:sda2
[ 22.833764] disk 1, o:1, dev:sdb2
[ 22.833764] disk 2, o:1, dev:sdc2
[ 22.833764] disk 3, o:1, dev:sdd2
[ 22.833764] disk 4, o:1, dev:sde2
[ 22.855137] md: bind<sdb1>
[ 22.855384] md: bind<sdc1>
[ 22.855614] md: bind<sdd1>
[ 22.855841] md: bind<sde1>
[ 22.856062] md: bind<sda1>
[ 22.888052] raid5: device sda1 operational as raid disk 0
[ 22.888144] raid5: device sde1 operational as raid disk 4
[ 22.888233] raid5: device sdd1 operational as raid disk 3
[ 22.888322] raid5: device sdc1 operational as raid disk 2
[ 22.888410] raid5: device sdb1 operational as raid disk 1
[ 22.888836] raid5: allocated 5324kB for md10
[ 22.888924] raid5: raid level 6 set md10 active with 5 out of 5 devices, algorithm 2
[ 22.889031] RAID5 conf printout:
[ 22.889116] --- rd:5 wd:5
[ 22.889200] disk 0, o:1, dev:sda1
[ 22.889285] disk 1, o:1, dev:sdb1
[ 22.889369] disk 2, o:1, dev:sdc1
[ 22.889454] disk 3, o:1, dev:sdd1
[ 22.889539] disk 4, o:1, dev:sde1
[ 24.425636] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 24.425636] SGI XFS Quota Management subsystem
[ 24.555015] Adding 4972536k swap on /dev/mapper/cleopatra-swap_1. Priority:-1 extents:1 across:4972536k
[ 26.036483] NET: Registered protocol family 10
[ 26.036483] lo: Disabled Privacy Extensions
[ 26.210010] no ownder
[ 26.210113] map irq failed
[ 26.211788] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.062713] RPC: Registered udp transport module.
[ 28.062825] RPC: Registered tcp transport module.
[ 28.413655] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 29.335150] eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 29.335622] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 34.303864] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 34.333004] NFSD: starting 90-second grace period
[ 37.763115] Bridge firewalling registered
[ 37.763986] tmpbridge: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 38.066787] no ownder
[ 38.066881] map irq failed
[ 38.069574] ADDRCONF(NETDEV_UP): peth0: link is not ready
[ 40.964632] peth0: Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 40.965866] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
[ 41.161573] device peth0 entered promiscuous mode
[ 41.181626] eth0: port 1(peth0) entering learning state
[ 41.184954] eth0: topology change detected, propagating
[ 41.185052] eth0: port 1(peth0) entering forwarding state
[ 41.735776] suspend: event channel 26
[ 51.951855] peth0: no IPv6 routers present
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-xen-amd64 (Debian 2.6.26-8) (waldi@xxxxxxxxxx) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Oct 9 17:11:22 UTC 2008
[ 0.000000] Command line: root=/dev/mapper/cleopatra-root ro console=tty0 elevator=deadline
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 0000000080800000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 526336) 0 entries of 256 used
[ 0.000000] max_pfn_mapped = 526336
[ 0.000000] init_memory_mapping
[ 0.000000] DMI present.
[ 0.000000] Entering add_active_range(0, 0, 526336) 0 entries of 256 used
[ 0.000000] early res: 0 [200000-631917] TEXT DATA BSS
[ 0.000000] early res: 1 [632000-1f53fff] Xen provided
[ 0.000000] early res: 2 [1f54000-1f55fff] INITMAP
[ 0.000000] early res: 3 [1f56000-235efff] PGTABLE
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 526336
[ 0.000000] On node 0 totalpages: 526336
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4040 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7140 pages used for memmap
[ 0.000000] DMA32 zone: 515100 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: RSDP 000F5F00, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT DFEE3831, 003C (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP DFEE9E70, 0074 (r1 INTEL 6040000 PTL 3)
[ 0.000000] ACPI: DSDT DFEE4C59, 5217 (r1 INTEL GLENWOOD 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS DFEEAFC0, 0040
[ 0.000000] ACPI: MCFG DFEE9EE4, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: HPET DFEE9F20, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
[ 0.000000] ACPI: APIC DFEE9F58, 0080 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT DFEE9FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT DFEE386D, 13EC (r1 PmRef CpuPm 3000 INTL 20050228)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 0, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfecc0400] gsi_base[48])
[ 0.000000] IOAPIC[2]: apic_id 4, version 0, address 0xfecc0400, GSI 48-71
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to xen
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at e1000000 (gap: e0000000:10000000)
[ 0.000000] PERCPU: Allocating 22192 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519140
[ 0.000000] Kernel command line: root=/dev/mapper/cleopatra-root ro console=tty0 elevator=deadline
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Xen reported: 2394.012 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] console [xvc-1] enabled
[ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004000] Software IO TLB enabled:
[ 0.004000] Aperture: 64 megabytes
[ 0.004000] Kernel range: ffff88000438f000 - ffff88000838f000
[ 0.004000] Address size: 27 bits
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Memory: 1964436k/2105344k available (2277k kernel code, 132504k reserved, 1021k data, 216k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.788052] Calibrating delay using timer specific routine.. 4796.97 BogoMIPS (lpj=9593953)
[ 0.788261] Security Framework initialized
[ 0.788352] SELinux: Disabled at boot.
[ 0.788439] Capability LSM initialized
[ 0.788538] Mount-cache hash table entries: 256
[ 0.788756] Initializing cgroup subsys ns
[ 0.788844] Initializing cgroup subsys cpuacct
[ 0.788931] Initializing cgroup subsys devices
[ 0.789042] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.789192] CPU: L2 cache: 4096K
[ 0.789279] CPU: Physical Processor ID: 0
[ 0.789365] CPU: Processor Core ID: 0
[ 0.789460] ACPI: Core revision 20080321
[ 0.797504] Brought up 2 CPUs
[ 0.797504] Initializing CPU#1
[ 0.797504] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.797504] CPU: L2 cache: 4096K
[ 0.797504] CPU: Physical Processor ID: 0
[ 0.797504] CPU: Processor Core ID: 1
[ 0.798035] CPU0 attaching sched-domain:
[ 0.798038] domain 0: span 0-1
[ 0.798040] groups: 0 1
[ 0.798043] CPU1 attaching sched-domain:
[ 0.798045] domain 0: span 0-1
[ 0.798046] groups: 1 0
[ 0.800145] net_namespace: 1224 bytes
[ 0.800383] NET: Registered protocol family 16
[ 0.800743] ACPI: bus type pci registered
[ 0.800926] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 19
[ 0.801018] PCI: MCFG area at f0000000 reserved in E820
[ 0.802456] PCI: Using MMCONFIG at f0000000 - f13fffff
[ 0.802545] PCI: Using configuration type 1 for base access
[ 0.805481] ACPI: EC: Look up EC in DSDT
[ 0.807438] ACPI: Interpreter enabled
[ 0.807528] ACPI: (supports S0 S1 S5)
[ 0.807819] ACPI: Using IOAPIC for interrupt routing
[ 0.813653] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.815356] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.815466] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.815812] pci 0000:01:00.0: PXH quirk detected; SHPC device MSI disabled
[ 0.816079] pci 0000:01:00.2: PXH quirk detected; SHPC device MSI disabled
[ 0.817588] PCI: Transparent bridge - 0000:00:1e.0
[ 0.817732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.817948] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DEV1.PXHA._PRT]
[ 0.818105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DEV1.PXHB._PRT]
[ 0.818273] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.818370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.818431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
[ 0.818491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.822621] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 11 14 15) *7
[ 0.823336] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 *11 14 15)
[ 0.823946] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 11 14 15) *5
[ 0.824620] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 *11 14 15)
[ 0.825234] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
[ 0.825991] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled.
[ 0.826620] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled.
[ 0.827408] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *10 11 14 15)
[ 0.829049] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.829645] pnp: PnP ACPI init
[ 0.829737] ACPI: bus type pnp registered
[ 0.829836] pnp 00:00: parse allocated resources
[ 0.830619] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.830619] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.830619] pnp 00:01: parse allocated resources
[ 0.830619] pnp 00:01: add io 0x10-0x1f flags 0x1
[ 0.830619] pnp 00:01: add io 0x24-0x25 flags 0x1
[ 0.830619] pnp 00:01: add io 0x28-0x29 flags 0x1
[ 0.830619] pnp 00:01: add io 0x2c-0x2d flags 0x1
[ 0.830619] pnp 00:01: add io 0x30-0x31 flags 0x1
[ 0.830619] pnp 00:01: add io 0x34-0x35 flags 0x1
[ 0.830619] pnp 00:01: add io 0x38-0x39 flags 0x1
[ 0.830619] pnp 00:01: add io 0x3c-0x3d flags 0x1
[ 0.830619] pnp 00:01: add io 0x72-0x77 flags 0x1
[ 0.830619] pnp 00:01: add io 0x80-0x80 flags 0x1
[ 0.830619] pnp 00:01: add io 0x90-0x9f flags 0x1
[ 0.830619] pnp 00:01: add io 0xa4-0xa5 flags 0x1
[ 0.830619] pnp 00:01: add io 0xa8-0xa9 flags 0x1
[ 0.830619] pnp 00:01: add io 0xac-0xad flags 0x1
[ 0.830619] pnp 00:01: add io 0xb0-0xb5 flags 0x1
[ 0.830619] pnp 00:01: add io 0xb8-0xb9 flags 0x1
[ 0.830619] pnp 00:01: add io 0xbc-0xbd flags 0x1
[ 0.830619] pnp 00:01: add io 0x295-0x296 flags 0x1
[ 0.830619] pnp 00:01: add io 0x800-0x83f flags 0x1
[ 0.830619] pnp 00:01: add io 0x900-0x90f flags 0x1
[ 0.830619] pnp 00:01: add io 0x1000-0x107f flags 0x1
[ 0.830619] pnp 00:01: add io 0x1180-0x11bf flags 0x1
[ 0.830619] pnp 00:01: add io 0x2e-0x2f flags 0x1
[ 0.830619] pnp 00:01: add io 0x4d0-0x4d1 flags 0x1
[ 0.830619] pnp 00:01: add io 0xfe00-0xfe00 flags 0x1
[ 0.830619] pnp 00:01: add mem 0xfed14000-0xfed17fff flags 0x1
[ 0.830619] pnp 00:01: add mem 0xfed13000-0xfed13fff flags 0x1
[ 0.830619] pnp 00:01: add mem 0xfed18000-0xfed1bfff flags 0x1
[ 0.830619] pnp 00:01: add mem 0xf0000000-0xf3ffffff flags 0x1
[ 0.830619] pnp 00:01: add mem 0xfed20000-0xfed8ffff flags 0x1
[ 0.830619] pnp 00:01: add mem 0xfef00000-0xfeffffff flags 0x1
[ 0.830619] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.830619] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.830619] pnp 00:02: parse allocated resources
[ 0.830619] pnp 00:02: add io 0x0-0xf flags 0x1
[ 0.830619] pnp 00:02: add io 0x81-0x8f flags 0x1
[ 0.830619] pnp 00:02: add io 0xc0-0xdf flags 0x1
[ 0.830619] pnp 00:02: add dma 4 flags 0x2
[ 0.830619] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.830619] pnp 00:03: parse allocated resources
[ 0.830619] pnp 00:03: add io 0xf0-0xfe flags 0x1
[ 0.830619] pnp 00:03: add irq 13 flags 0x1
[ 0.830619] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.830619] pnp 00:04: parse allocated resources
[ 0.830619] pnp 00:04: add io 0x70-0x71 flags 0x1
[ 0.830619] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.830619] pnp 00:05: parse allocated resources
[ 0.830619] pnp 00:05: add io 0x61-0x61 flags 0x1
[ 0.830619] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.830619] pnp 00:06: parse allocated resources
[ 0.830619] pnp 00:06: add irq 8 flags 0x1
[ 0.830619] pnp 00:06: add mem 0xfed00000-0xfed003ff flags 0x0
[ 0.830619] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.830619] pnp 00:07: parse allocated resources
[ 0.830619] pnp 00:07: add mem 0xff800000-0xffffffff flags 0x0
[ 0.830619] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.830619] pnp 00:08: parse allocated resources
[ 0.830619] pnp 00:08: add io 0x60-0x60 flags 0x1
[ 0.830619] pnp 00:08: add io 0x64-0x64 flags 0x1
[ 0.830619] pnp 00:08: add irq 1 flags 0x1
[ 0.830619] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.830619] pnp 00:09: parse allocated resources
[ 0.830619] pnp 00:09: add irq 12 flags 0x1
[ 0.830619] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 PNP0f13 (active)
[ 0.830759] pnp 00:0a: parse allocated resources
[ 0.830943] pnp 00:0a: add io 0x3f8-0x3ff flags 0x1
[ 0.830947] pnp 00:0a: add irq 4 flags 0x1
[ 0.830949] pnp 00:0a: parse resource options
[ 0.830951] pnp 00:0a: new independent option
[ 0.830959] pnp 00:0a: new dependent option (priority 0x0)
[ 0.830961] pnp 00:0a: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.830965] pnp 00:0a: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.830968] pnp 00:0a: new dependent option (priority 0x1)
[ 0.830970] pnp 00:0a: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.830973] pnp 00:0a: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.830975] pnp 00:0a: new dependent option (priority 0x1)
[ 0.830979] pnp 00:0a: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.830982] pnp 00:0a: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.830984] pnp 00:0a: new dependent option (priority 0x1)
[ 0.830986] pnp 00:0a: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.830990] pnp 00:0a: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.830992] pnp 00:0a: new dependent option (priority 0x2)
[ 0.830994] pnp 00:0a: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.830997] pnp 00:0a: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.831000] pnp 00:0a: new dependent option (priority 0x2)
[ 0.831002] pnp 00:0a: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.831005] pnp 00:0a: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.831008] pnp 00:0a: new dependent option (priority 0x2)
[ 0.831010] pnp 00:0a: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.831013] pnp 00:0a: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.831016] pnp 00:0a: new dependent option (priority 0x2)
[ 0.831018] pnp 00:0a: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.831021] pnp 00:0a: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.831023] pnp 00:0a: end dependent options
[ 0.834618] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.834618] pnp 00:0b: parse allocated resources
[ 0.834618] pnp 00:0b: add io 0x2f8-0x2ff flags 0x1
[ 0.834618] pnp 00:0b: add irq 3 flags 0x1
[ 0.834618] pnp 00:0b: parse resource options
[ 0.834618] pnp 00:0b: new independent option
[ 0.834618] pnp 00:0b: new dependent option (priority 0x1)
[ 0.834618] pnp 00:0b: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.834618] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.834618] pnp 00:0b: new dependent option (priority 0x0)
[ 0.834618] pnp 00:0b: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.834618] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.834618] pnp 00:0b: new dependent option (priority 0x1)
[ 0.834618] pnp 00:0b: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.834618] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.834618] pnp 00:0b: new dependent option (priority 0x1)
[ 0.834618] pnp 00:0b: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.834618] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.834618] pnp 00:0b: new dependent option (priority 0x2)
[ 0.834618] pnp 00:0b: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.834618] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.834618] pnp 00:0b: new dependent option (priority 0x2)
[ 0.834618] pnp 00:0b: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.834618] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.834618] pnp 00:0b: new dependent option (priority 0x2)
[ 0.834618] pnp 00:0b: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.834618] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.834618] pnp 00:0b: new dependent option (priority 0x2)
[ 0.834618] pnp 00:0b: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.834618] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.834618] pnp 00:0b: end dependent options
[ 0.834618] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.834618] pnp 00:0c: parse allocated resources
[ 0.834618] pnp 00:0c: add io 0x3f0-0x3f5 flags 0x1
[ 0.834618] pnp 00:0c: add io 0x3f7-0x3f7 flags 0x1
[ 0.834618] pnp 00:0c: add irq 6 flags 0x1
[ 0.834618] pnp 00:0c: add dma 2 flags 0x0
[ 0.834618] pnp 00:0c: parse resource options
[ 0.834618] pnp 00:0c: new independent option
[ 0.834618] pnp 00:0c: new dependent option (priority 0x0)
[ 0.834618] pnp 00:0c: io min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1
[ 0.834618] pnp 00:0c: io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1
[ 0.834618] pnp 00:0c: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000040 flags 0x1
[ 0.834618] pnp 00:0c: dma bitmask 0x4 flags 0x0
[ 0.834618] pnp 00:0c: new dependent option (priority 0x0)
[ 0.834618] pnp 00:0c: io min 0x370 max 0x370 align 1 size 6 flags 0x1
[ 0.834618] pnp 00:0c: io min 0x377 max 0x377 align 1 size 1 flags 0x1
[ 0.834618] pnp 00:0c: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000040 flags 0x1
[ 0.834618] pnp 00:0c: dma bitmask 0x4 flags 0x0
[ 0.834618] pnp 00:0c: end dependent options
[ 0.834618] pnp 00:0c: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.834618] pnp: PnP ACPI: found 13 devices
[ 0.834618] ACPI: ACPI bus type pnp unregistered
[ 0.834618] xen_mem: Initialising balloon driver.
[ 0.834618] usbcore: registered new interface driver usbfs
[ 0.834618] usbcore: registered new interface driver hub
[ 0.834618] usbcore: registered new device driver usb
[ 0.834618] PCI: Using ACPI for IRQ routing
[ 0.834618] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[ 0.844634] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[ 0.844728] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[ 0.864776] ACPI: RTC can wake from S4
[ 0.884689] pnp: the driver 'system' has been registered
[ 0.884700] system 00:01: ioport range 0x295-0x296 has been reserved
[ 0.884805] system 00:01: ioport range 0x800-0x83f has been reserved
[ 0.884909] system 00:01: ioport range 0x900-0x90f has been reserved
[ 0.885016] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.885107] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 0.885198] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.885289] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 0.885381] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.885473] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
[ 0.885565] system 00:01: iomem range 0xfed18000-0xfed1bfff has been reserved
[ 0.885658] system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 0.885765] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.885857] system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved
[ 0.885949] system 00:01: driver attached
[ 0.886480] PCI: Failed to allocate mem resource #9:100000@e1800000 for 0000:01:00.2
[ 0.886480] PCI: Bridge: 0000:01:00.0
[ 0.886480] IO window: 4000-4fff
[ 0.886480] MEM window: 0xe0200000-0xe02fffff
[ 0.886480] PREFETCH window: 0x00000000e1000000-0x00000000e17fffff
[ 0.886480] PCI: Bridge: 0000:01:00.2
[ 0.886480] IO window: 5000-5fff
[ 0.886480] MEM window: 0xe0300000-0xe03fffff
[ 0.886480] PREFETCH window: disabled.
[ 0.886480] PCI: Bridge: 0000:00:01.0
[ 0.886480] IO window: 4000-5fff
[ 0.886480] MEM window: 0xe0100000-0xe03fffff
[ 0.886480] PREFETCH window: 0x00000000e1000000-0x00000000e17fffff
[ 0.886480] PCI: Bridge: 0000:00:1c.0
[ 0.886480] IO window: disabled.
[ 0.886480] MEM window: disabled.
[ 0.886480] PREFETCH window: disabled.
[ 0.886480] PCI: Bridge: 0000:00:1c.4
[ 0.886480] IO window: 6000-6fff
[ 0.886480] MEM window: 0xe0400000-0xe04fffff
[ 0.886480] PREFETCH window: disabled.
[ 0.886480] PCI: Bridge: 0000:00:1c.5
[ 0.886480] IO window: 7000-7fff
[ 0.886574] MEM window: 0xe0500000-0xe05fffff
[ 0.886580] PREFETCH window: disabled.
[ 0.891268] PCI: Bridge: 0000:00:1e.0
[ 0.891358] IO window: 8000-8fff
[ 0.891451] MEM window: 0xe0600000-0xe06fffff
[ 0.891545] PREFETCH window: 0x00000000e8000000-0x00000000efffffff
[ 0.891669] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.891849] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.891879] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 0.891909] PCI: Setting latency timer of device 0000:01:00.2 to 64
[ 0.891942] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.892124] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.892156] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.892336] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.892367] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.892548] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.892566] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.892603] NET: Registered protocol family 2
[ 0.939494] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.939873] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.941505] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.942215] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.942307] TCP reno registered
[ 0.951517] NET: Registered protocol family 1
[ 0.951725] checking if image is initramfs... it is
[ 0.971406] Freeing initrd memory: 21558k freed
[ 0.979853] Simple Boot Flag at 0x38 set to 0x1
[ 0.982401] audit: initializing netlink socket (disabled)
[ 0.982401] type=2000 audit(1224002540.968:1): initialized
[ 0.982401] VFS: Disk quotas dquot_6.5.1
[ 0.982401] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.982401] msgmni has been set to 4138
[ 0.982401] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.982401] io scheduler noop registered
[ 0.982401] io scheduler anticipatory registered
[ 0.982401] io scheduler deadline registered (default)
[ 0.982401] io scheduler cfq registered
[ 0.982401] pci 0000:14:04.0: Boot video device
[ 0.982401] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.982401] assign_interrupt_mode Found MSI capability
[ 0.982401] no ownder
[ 0.982401] map irq failed
[ 0.982401] Allocate Port Service[0000:00:01.0:pcie00]
[ 0.982401] Allocate Port Service[0000:00:01.0:pcie03]
[ 0.982401] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.982401] assign_interrupt_mode Found MSI capability
[ 0.982401] no ownder
[ 0.982493] map irq failed
[ 0.983778] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.984211] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.984613] Allocate Port Service[0000:00:1c.0:pcie03]
[ 0.985081] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.985147] assign_interrupt_mode Found MSI capability
[ 0.985275] no ownder
[ 0.985361] map irq failed
[ 0.985447] Allocate Port Service[0000:00:1c.4:pcie00]
[ 0.986797] Allocate Port Service[0000:00:1c.4:pcie02]
[ 0.987592] Allocate Port Service[0000:00:1c.4:pcie03]
[ 0.987592] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.987592] assign_interrupt_mode Found MSI capability
[ 0.987592] no ownder
[ 0.987592] map irq failed
[ 0.987592] Allocate Port Service[0000:00:1c.5:pcie00]
[ 0.987592] Allocate Port Service[0000:00:1c.5:pcie02]
[ 0.987592] Allocate Port Service[0000:00:1c.5:pcie03]
[ 0.991592] Linux agpgart interface v0.103
[ 0.991592] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.991592] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.991592] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.991592] pnp: the driver 'serial' has been registered
[ 0.991592] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.991592] serial 00:0a: driver attached
[ 0.991592] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.991592] serial 00:0b: driver attached
[ 0.991593] brd: module loaded
[ 0.991593] input: Macintosh mouse button emulation as /class/input/input0
[ 0.991761] Xen virtual console successfully installed as xvc0
[ 0.992518] Event-channel device installed.
[ 0.995593] netfront: Initialising virtual ethernet driver.
[ 0.995593] pnp: the driver 'i8042 kbd' has been registered
[ 0.995593] i8042 kbd 00:08: driver attached
[ 0.995593] pnp: the driver 'i8042 aux' has been registered
[ 0.995593] i8042 aux 00:09: driver attached
[ 0.995593] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.997831] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.997922] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.016855] mice: PS/2 mouse device common for all mice
[ 1.016990] pnp: the driver 'rtc_cmos' has been registered
[ 1.017048] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.017158] rtc0: alarms up to one month, y3k
[ 1.017245] rtc_cmos 00:04: driver attached
[ 1.017274] No iBFT detected.
[ 1.017671] TCP cubic registered
[ 1.017757] NET: Registered protocol family 17
[ 1.017938] registered taskstats version 1
[ 1.018150] rtc_cmos 00:04: setting system clock to 2008-10-14 16:42:21 UTC (1224002541)
[ 1.018265] Freeing unused kernel memory: 216k freed
[ 1.040665] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.122890] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.123258] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.123606] ACPI: ACPI0007:02 is registered as cooling_device2
[ 1.123954] ACPI: ACPI0007:03 is registered as cooling_device3
[ 1.124301] ACPI: ACPI0007:04 is registered as cooling_device4
[ 1.124651] ACPI: ACPI0007:05 is registered as cooling_device5
[ 1.125001] ACPI: ACPI0007:06 is registered as cooling_device6
[ 1.125357] ACPI: ACPI0007:07 is registered as cooling_device7
[ 1.383912] No dock devices found.
[ 1.388931] SCSI subsystem initialized
[ 1.402806] libata version 3.00 loaded.
[ 1.402856] 3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
[ 1.403017] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 24 (level, low) -> IRQ 24
[ 1.419617] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
[ 1.419716] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.431513] USB Universal Host Controller Interface driver v3.0
[ 1.523034] floppy0: Unable to grab DMA2 for the floppy driver
[ 1.541613] FDC 0 is a post-1991 82077
[ 1.630458] scsi0 : 3ware 9000 Storage Controller
[ 1.630641] 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xe0200000, IRQ: 24.
[ 1.966457] 3w-9xxx: scsi0: Firmware FE9X 2.08.00.009, BIOS BE9X 2.03.01.052, Ports: 12.
[ 1.968018] sata_sil24 0000:03:01.0: version 1.1
[ 1.968046] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 48 (level, low) -> IRQ 48
[ 1.968236] sata_sil24 0000:03:01.0: Applying completion IRQ loss on PCI-X errata fix
[ 1.968280] scsi1 : sata_sil24
[ 1.968280] scsi2 : sata_sil24
[ 1.968280] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 1.968280] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1.968280] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.968280] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.968280] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003000
[ 1.968280] usb usb1: configuration #1 chosen from 1 choice
[ 1.968280] hub 1-0:1.0: USB hub found
[ 1.968280] hub 1-0:1.0: 2 ports detected
[ 1.968280] scsi3 : sata_sil24
[ 1.968280] scsi4 : sata_sil24
[ 1.968280] ata1: SATA max UDMA/100 host m128@0xe0308000 port 0xe0300000 irq 48
[ 1.968280] ata2: SATA max UDMA/100 host m128@0xe0308000 port 0xe0302000 irq 48
[ 1.968280] ata3: SATA max UDMA/100 host m128@0xe0308000 port 0xe0304000 irq 48
[ 1.968280] ata4: SATA max UDMA/100 host m128@0xe0308000 port 0xe0306000 irq 48
[ 2.071272] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.071380] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.071503] usb usb1: Product: UHCI Host Controller
[ 2.071590] usb usb1: Manufacturer: Linux 2.6.26-1-xen-amd64 uhci_hcd
[ 2.071680] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.073094] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 2.073271] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.073275] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.073399] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.073536] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003020
[ 2.079771] usb usb2: configuration #1 chosen from 1 choice
[ 2.079881] hub 2-0:1.0: USB hub found
[ 2.079975] hub 2-0:1.0: 2 ports detected
[ 2.184509] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.184615] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.184739] usb usb2: Product: UHCI Host Controller
[ 2.184826] usb usb2: Manufacturer: Linux 2.6.26-1-xen-amd64 uhci_hcd
[ 2.184916] usb usb2: SerialNumber: 0000:00:1d.1
[ 2.186273] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 2.186451] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.186455] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.186577] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.186715] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 2.186877] usb usb3: configuration #1 chosen from 1 choice
[ 2.186985] hub 3-0:1.0: USB hub found
[ 2.186985] hub 3-0:1.0: 2 ports detected
[ 2.288723] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.288836] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.288943] usb usb3: Product: UHCI Host Controller
[ 2.289030] usb usb3: Manufacturer: Linux 2.6.26-1-xen-amd64 uhci_hcd
[ 2.289121] usb usb3: SerialNumber: 0000:00:1d.2
[ 2.290451] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 2.290627] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 2.290632] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.290753] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 2.290890] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003060
[ 2.290985] usb usb4: configuration #1 chosen from 1 choice
[ 2.290985] hub 4-0:1.0: USB hub found
[ 2.290985] hub 4-0:1.0: 2 ports detected
[ 2.393691] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.393797] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.393920] usb usb4: Product: UHCI Host Controller
[ 2.394007] usb usb4: Manufacturer: Linux 2.6.26-1-xen-amd64 uhci_hcd
[ 2.394098] usb usb4: SerialNumber: 0000:00:1d.3
[ 2.395468] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 2.395653] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.395657] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.395781] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 2.399808] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.399902] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 2.399906] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0000000
[ 2.414732] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.414914] usb usb5: configuration #1 chosen from 1 choice
[ 2.415042] hub 5-0:1.0: USB hub found
[ 2.415138] hub 5-0:1.0: 8 ports detected
[ 2.518837] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.518944] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.519067] usb usb5: Product: EHCI Host Controller
[ 2.519154] usb usb5: Manufacturer: Linux 2.6.26-1-xen-amd64 ehci_hcd
[ 2.519245] usb usb5: SerialNumber: 0000:00:1d.7
[ 4.087104] ata1: SATA link down (SStatus 0 SControl 0)
[ 6.199345] ata2: SATA link down (SStatus 0 SControl 0)
[ 8.343532] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 8.343757] ata3.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
[ 8.359613] ata3.00: hard resetting link
[ 8.695610] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 8.695723] ata3.01: hard resetting link
[ 9.031587] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.031699] ata3.02: hard resetting link
[ 9.367582] ata3.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.367694] ata3.03: hard resetting link
[ 9.703578] ata3.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.703690] ata3.04: hard resetting link
[ 10.039574] ata3.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 10.039687] ata3.05: hard resetting link
[ 10.375537] ata3.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[ 10.383308] ata3.00: FORCE: horkage modified (noncq)
[ 10.383471] ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01112, max UDMA7
[ 10.383574] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (not used)
[ 10.389920] ata3.00: configured for UDMA/100
[ 10.404563] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x11)
[ 10.404668] ata3.15: hard resetting link
[ 12.532590] ata3.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 12.532818] ata3.00: hard resetting link
[ 12.868695] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 12.868807] ata3.01: hard resetting link
[ 13.204711] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 13.204823] ata3.02: hard resetting link
[ 13.540650] ata3.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 13.540763] ata3.03: hard resetting link
[ 13.876662] ata3.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 13.876775] ata3.04: hard resetting link
[ 14.212691] ata3.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 14.212801] ata3.05: hard resetting link
[ 14.548666] ata3.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[ 14.561833] ata3.00: configured for UDMA/100
[ 14.576783] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x11)
[ 14.577849] ata3.15: hard resetting link
[ 16.705791] ata3.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 16.706018] ata3.00: hard resetting link
[ 17.041916] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 17.042028] ata3.01: hard resetting link
[ 17.377911] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 17.378024] ata3.02: hard resetting link
[ 17.713834] ata3.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 17.713938] ata3.03: hard resetting link
[ 18.049813] ata3.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 18.049925] ata3.04: hard resetting link
[ 18.385941] ata3.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 18.386054] ata3.05: hard resetting link
[ 18.721898] ata3.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[ 18.735003] ata3.00: configured for UDMA/100
[ 18.749948] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x11)
[ 18.750052] ata3.01: failed to recover link after 3 tries, disabling
[ 18.750155] ata3: failed to recover PMP, retrying in 5 secs
[ 23.753975] ata3.15: hard resetting link
[ 25.881927] ata3.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 26.201981] ata3.00: hard resetting link
[ 26.538070] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 26.538178] ata3.02: hard resetting link
[ 26.874030] ata3.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 26.874143] ata3.03: hard resetting link
[ 27.210041] ata3.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 27.210145] ata3.04: hard resetting link
[ 27.545988] ata3.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 27.546100] ata3.05: hard resetting link
[ 27.881968] ata3.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[ 27.894998] ata3.00: configured for UDMA/100
[ 27.901497] ata3.02: FORCE: horkage modified (noncq)
[ 27.901658] ata3.02: ATA-7: SAMSUNG HD103UJ, 1AA01112, max UDMA7
[ 27.901769] ata3.02: 1953525168 sectors, multi 0: LBA48 NCQ (not used)
[ 27.908257] ata3.02: configured for UDMA/100
[ 27.914623] ata3.03: FORCE: horkage modified (noncq)
[ 27.914784] ata3.03: ATA-7: SAMSUNG HD103UJ, 1AA01112, max UDMA7
[ 27.914895] ata3.03: 1953525168 sectors, multi 0: LBA48 NCQ (not used)
[ 27.921389] ata3.03: configured for UDMA/100
[ 27.927753] ata3.04: FORCE: horkage modified (noncq)
[ 27.927913] ata3.04: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 27.928016] ata3.04: 1953525168 sectors, multi 0: LBA48 NCQ (not used)
[ 27.934519] ata3.04: configured for UDMA/100
[ 28.270164] ata3: EH complete
[ 30.382321] ata4: SATA link down (SStatus 0 SControl 0)
[ 30.382450] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 30.382681] scsi 3:2:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 30.382880] scsi 3:3:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 30.383079] scsi 3:4:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 30.384310] ACPI: PCI Interrupt 0000:12:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 30.384498] PCI: Setting latency timer of device 0000:12:00.0 to 64
[ 30.395994] Driver 'sd' needs updating - please use bus_type methods
[ 30.404791] sd 3:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
[ 30.404925] sd 3:0:0:0: [sda] Write Protect is off
[ 30.405017] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.405036] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.405196] sd 3:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
[ 30.405315] sd 3:0:0:0: [sda] Write Protect is off
[ 30.405407] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.405427] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.405542] sda: sda1 sda2
[ 30.450713] sd 3:0:0:0: [sda] Attached SCSI disk
[ 30.450863] sd 3:2:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 30.450984] sd 3:2:0:0: [sdb] Write Protect is off
[ 30.451075] sd 3:2:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 30.451093] sd 3:2:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.451238] sd 3:2:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 30.451358] sd 3:2:0:0: [sdb] Write Protect is off
[ 30.451449] sd 3:2:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 30.451467] sd 3:2:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.451580] sdb: sdb1 sdb2
[ 30.462216] sd 3:2:0:0: [sdb] Attached SCSI disk
[ 30.462346] sd 3:3:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
[ 30.462466] sd 3:3:0:0: [sdc] Write Protect is off
[ 30.462557] sd 3:3:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 30.462575] sd 3:3:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.468807] sd 3:3:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
[ 30.468926] sd 3:3:0:0: [sdc] Write Protect is off
[ 30.469018] sd 3:3:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 30.469036] sd 3:3:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.469149] sdc: sdc1 sdc2
[ 30.482928] sd 3:3:0:0: [sdc] Attached SCSI disk
[ 30.483446] sd 3:4:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
[ 30.483566] sd 3:4:0:0: [sdd] Write Protect is off
[ 30.483657] sd 3:4:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 30.483675] sd 3:4:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.483820] sd 3:4:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
[ 30.483939] sd 3:4:0:0: [sdd] Write Protect is off
[ 30.484030] sd 3:4:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 30.484048] sd 3:4:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.484161] sdd: sdd1 sdd2
[ 30.498842] sd 3:4:0:0: [sdd] Attached SCSI disk
[ 30.507249] eth0: (PCI Express:2.5GB/s:Width x1) 00:30:48:8f:59:b6
[ 30.507353] eth0: Intel(R) PRO/1000 Network Connection
[ 30.507615] eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
[ 30.507770] ACPI: PCI Interrupt 0000:13:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 30.507959] PCI: Setting latency timer of device 0000:13:00.0 to 64
[ 30.630491] eth1: (PCI Express:2.5GB/s:Width x1) 00:30:48:8f:59:b7
[ 30.630589] eth1: Intel(R) PRO/1000 Network Connection
[ 30.630745] eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff
[ 30.635561] ata_piix 0000:00:1f.2: version 2.12
[ 30.635561] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 30.635561] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 30.789665] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 30.790040] scsi5 : ata_piix
[ 30.790211] scsi6 : ata_piix
[ 30.791060] ata5: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30a0 irq 14
[ 30.791156] ata6: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30a8 irq 15
[ 30.954946] ata5.00: FORCE: horkage modified (noncq)
[ 30.956884] ata5.00: ATA-8: SAMSUNG HM121HI, LZ100-08, max UDMA7
[ 30.956988] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (not used)
[ 30.972764] ata5.00: configured for UDMA/133
[ 31.139542] ata6.00: FORCE: horkage modified (noncq)
[ 31.141661] ata6.00: ATA-8: SAMSUNG HM121HI, LZ100-08, max UDMA7
[ 31.141661] ata6.00: 234441648 sectors, multi 16: LBA48 NCQ (not used)
[ 31.161601] ata6.00: configured for UDMA/133
[ 31.161659] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HM121HI LZ10 PQ: 0 ANSI: 5
[ 31.161659] sd 5:0:0:0: [sde] 234441648 512-byte hardware sectors (120034 MB)
[ 31.161659] sd 5:0:0:0: [sde] Write Protect is off
[ 31.161659] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 31.161659] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 31.161659] sd 5:0:0:0: [sde] 234441648 512-byte hardware sectors (120034 MB)
[ 31.161659] sd 5:0:0:0: [sde] Write Protect is off
[ 31.161659] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 31.161659] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 31.161659] sde: sde1 sde2
[ 31.814038] sd 5:0:0:0: [sde] Attached SCSI disk
[ 31.814201] scsi 6:0:0:0: Direct-Access ATA SAMSUNG HM121HI LZ10 PQ: 0 ANSI: 5
[ 31.814365] sd 6:0:0:0: [sdf] 234441648 512-byte hardware sectors (120034 MB)
[ 31.814469] sd 6:0:0:0: [sdf] Write Protect is off
[ 31.814561] sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 31.814578] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 31.814722] sd 6:0:0:0: [sdf] 234441648 512-byte hardware sectors (120034 MB)
[ 31.814827] sd 6:0:0:0: [sdf] Write Protect is off
[ 31.814918] sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 31.814935] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 31.815049] sdf: sdf1 sdf2
[ 32.491794] sd 6:0:0:0: [sdf] Attached SCSI disk
[ 32.494108] Uniform Multi-Platform E-IDE driver
[ 32.494108] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 32.728630] md: raid1 personality registered for level 1
[ 32.733849] xor: automatically using best checksumming function: generic_sse
[ 32.750906] generic_sse: 5720.000 MB/sec
[ 32.750906] xor: using function: generic_sse (5720.000 MB/sec)
[ 32.750906] async_tx: api initialized (async)
[ 32.822546] raid6: int64x1 2240 MB/s
[ 32.890559] raid6: int64x2 3012 MB/s
[ 32.958571] raid6: int64x4 2643 MB/s
[ 33.026583] raid6: int64x8 1720 MB/s
[ 33.094600] raid6: sse2x1 3275 MB/s
[ 33.162615] raid6: sse2x2 3568 MB/s
[ 33.230627] raid6: sse2x4 7050 MB/s
[ 33.230627] raid6: using algorithm sse2x4 (7050 MB/s)
[ 33.230627] md: raid6 personality registered for level 6
[ 33.230627] md: raid5 personality registered for level 5
[ 33.230627] md: raid4 personality registered for level 4
[ 33.242464] md: md0 stopped.
[ 33.256246] md: bind<sdf1>
[ 33.256574] md: bind<sde1>
[ 33.264344] raid1: raid set md0 active with 2 out of 2 mirrors
[ 33.266445] md0: bitmap initialized from disk: read 4/4 pages, set 0 bits
[ 33.266537] created bitmap (61 pages) for device md0
[ 33.310420] md: md1 stopped.
[ 33.319791] md: bind<sdf2>
[ 33.319791] md: bind<sde2>
[ 33.327606] raid1: raid set md1 active with 2 out of 2 mirrors
[ 33.337696] md1: bitmap initialized from disk: read 14/14 pages, set 82 bits
[ 33.337792] created bitmap (223 pages) for device md1
[ 33.384725] md: md2 stopped.
[ 33.387372] md: md4 stopped.
[ 33.423094] md: md3 stopped.
[ 33.481275] device-mapper: uevent: version 1.0.3
[ 33.481275] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx
[ 33.712637] kjournald starting. Commit interval 5 seconds
[ 33.712756] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.658257] udevd version 125 started
[ 36.357557] EDAC MC: Ver: 2.1.0 Oct 9 2008
[ 36.380399] input: Power Button (FF) as /class/input/input2
[ 36.385009] EDAC MC0: Giving out device to 'i3000_edac' 'i3000': DEV 0000:00:00.0
[ 36.385009] EDAC PCI0: Giving out device to module 'i3000_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[ 36.429066] ACPI: Power Button (FF) [PWRF]
[ 36.429234] input: Power Button (CM) as /class/input/input3
[ 36.501472] ACPI: Power Button (CM) [PWRB]
[ 36.657100] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 36.667726] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 36.782686] intel_rng: FWH not detected
[ 36.802131] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 36.814264] input: PC Speaker as /class/input/input4
[ 36.853791] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 37.236354] input: ImExPS/2 Generic Explorer Mouse as /class/input/input5
[ 37.264723] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x1060)
[ 37.264865] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 39.163310] EXT3 FS on dm-0, internal journal
[ 40.477642] loop: module loaded
[ 40.545727] md: md2 stopped.
[ 40.617272] md: md4 stopped.
[ 40.760450] md: bind<sdb2>
[ 40.761655] md: bind<sdc2>
[ 40.761883] md: bind<sdd2>
[ 40.762104] md: bind<sda2>
[ 40.847721] raid5: device sda2 operational as raid disk 0
[ 40.847721] raid5: device sdd2 operational as raid disk 4
[ 40.847721] raid5: device sdc2 operational as raid disk 3
[ 40.847721] raid5: device sdb2 operational as raid disk 2
[ 40.847721] raid5: allocated 5324kB for md11
[ 40.847721] raid5: raid level 5 set md11 active with 4 out of 5 devices, algorithm 2
[ 40.847721] RAID5 conf printout:
[ 40.847721] --- rd:5 wd:4
[ 40.847721] disk 0, o:1, dev:sda2
[ 40.847721] disk 2, o:1, dev:sdb2
[ 40.847721] disk 3, o:1, dev:sdc2
[ 40.853869] disk 4, o:1, dev:sdd2
[ 40.857847] md: bind<sdb1>
[ 40.858057] md: bind<sdc1>
[ 40.858261] md: bind<sdd1>
[ 40.858464] md: bind<sda1>
[ 40.888956] raid5: device sda1 operational as raid disk 0
[ 40.889054] raid5: device sdd1 operational as raid disk 4
[ 40.889146] raid5: device sdc1 operational as raid disk 3
[ 40.889238] raid5: device sdb1 operational as raid disk 2
[ 40.891733] raid5: allocated 5324kB for md10
[ 40.891733] raid5: raid level 6 set md10 active with 4 out of 5 devices, algorithm 2
[ 40.891733] RAID5 conf printout:
[ 40.891733] --- rd:5 wd:4
[ 40.891733] disk 0, o:1, dev:sda1
[ 40.891733] disk 2, o:1, dev:sdb1
[ 40.891733] disk 3, o:1, dev:sdc1
[ 40.891733] disk 4, o:1, dev:sdd1
[ 42.296413] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 42.296413] SGI XFS Quota Management subsystem
[ 42.423652] Adding 4972536k swap on /dev/mapper/cleopatra-swap_1. Priority:-1 extents:1 across:4972536k
[ 43.910868] NET: Registered protocol family 10
[ 43.910868] lo: Disabled Privacy Extensions
[ 44.057216] no ownder
[ 44.057308] map irq failed
[ 44.058743] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 45.912555] RPC: Registered udp transport module.
[ 45.912555] RPC: Registered tcp transport module.
[ 46.251245] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 46.749950] eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 46.750443] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 52.125226] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 52.171087] NFSD: starting 90-second grace period
[ 55.827905] Bridge firewalling registered
[ 55.828777] tmpbridge: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 56.138353] no ownder
[ 56.138462] map irq failed
[ 56.139864] ADDRCONF(NETDEV_UP): peth0: link is not ready
[ 58.739116] peth0: Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 58.739729] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
[ 59.186009] device peth0 entered promiscuous mode
[ 59.464293] eth0: port 1(peth0) entering learning state
[ 59.468010] eth0: topology change detected, propagating
[ 59.468292] eth0: port 1(peth0) entering forwarding state
[ 60.052183] suspend: event channel 26
[ 69.073711] peth0: no IPv6 routers present
/dev/sdb:
ATA device, with non-removable media
Model Number: SAMSUNG HD103UJ
Serial Number: S13PJ1EQ505832
Firmware Revision: 1AA01112
Standards:
Used: ATA-8-ACS revision 3b
Supported: 7 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 1953525168
device size with M = 1024*1024: 953869 MBytes
device size with M = 1000*1000: 1000204 MBytes (1000 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 0
Advanced power management level: disabled
Recommended acoustic management value: 254, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 udma6 udma7
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Advanced Power Management feature set
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
Media Card Pass-Through
* General Purpose Logging feature set
* 64-bit World wide name
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
* unknown 76[12]
DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
178min for SECURITY ERASE UNIT. 178min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5000f00b058523
NAA : 5
IEEE OUI : f0
Unique ID : 0b058523
Checksum: correct
