On Fri, 10 Oct 2008, Borislav Petkov wrote:
> please hit the "reply-to-all" button on your mail client next time
> so that all people/mailing lists on the CC also get included.
You are right. Sorry. I sometimes find myself asking the same thing to
people sending debian bug reports to me.
> Ok, can you now turn off your hdd drive - the CDU5211 one (simply disconnecting
> the power cable should suffice) and then reboot and send me dmesg again. See,
> there's a lot of verbose output there in the dmesg and I can't differentiate
> which comes from which but hdc-only output is relevant.
Here it is.
Note: The delay is now about 180 seconds because there has been an
udev upgrade in the meantime, which overwrote the file
/usr/share/initramfs-tools/scripts/init-premount/udev
where I reduced the time from 180 to 10 seconds.
The kernel is the same as before (2.6.27-rc7)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-rc7 (sanvila@salma1) (gcc version 4.3.1 (Debian 4.3.1-9) ) #1 SMP Sun Oct 5 11:29:16 CEST 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0xfff0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to fff0000 @ 7000-d000
[ 0.000000] RAMDISK: 0fd9e000 - 0ffdf96d
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP 000F7610, 0014 (r0 VIA694)
[ 0.000000] ACPI: RSDT 0FFF3000, 0028 (r1 VIA694 MSI ACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 0FFF3040, 0074 (r1 VIA694 MSI ACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 0FFF30C0, 259F (r1 VIA694 AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 0FFF0000, 0040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0fff0000
[ 0.000000] low ram: 00000000 - 0fff0000
[ 0.000000] bootmap 00002000 - 00004000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 000fff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00004268e0] TEXT DATA BSS ==> [0000100000 - 00004268e0]
[ 0.000000] #4 [000fd9e000 - 000ffdf96d] RAMDISK ==> [000fd9e000 - 000ffdf96d]
[ 0.000000] #5 [0000427000 - 000042a000] INIT_PG_TABLE ==> [0000427000 - 000042a000]
[ 0.000000] #6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #8 [0000002000 - 0000004000] BOOTMAP ==> [0000002000 - 0000004000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000fff0
[ 0.000000] HighMem 0x0000fff0 -> 0x0000fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0000fff0
[ 0.000000] On node 0 totalpages: 65424
[ 0.000000] free_area_init_node: node 0, pgdat c0367000, node_mem_map c1000000
[ 0.000000] DMA zone: 3968 pages, LIFO batch:0
[ 0.000000] Normal zone: 60944 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (01201000)
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:efff0000)
[ 0.000000] PERCPU: Allocating 37500 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64912
[ 0.000000] Kernel command line: root=/dev/hda6 ro vga=4
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 799.608 MHz processor.
[ 0.004000] Console: colour VGA+ 80x30
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.004000] Memory: 253612k/262080k available (1787k kernel code, 7892k reserved, 733k data, 280k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff50000 - 0xfffff000 ( 700 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[ 0.004000] .init : 0xc037d000 - 0xc03c3000 ( 280 kB)
[ 0.004000] .data : 0xc02bec70 - 0xc0376290 ( 733 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02bec70 (1787 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004023] Calibrating delay loop (skipped), value calculated using timer frequency.. 1599.21 BogoMIPS (lpj=3198432)
[ 0.004229] Security Framework initialized
[ 0.004294] SELinux: Disabled at boot.
[ 0.004382] Mount-cache hash table entries: 512
[ 0.004828] Initializing cgroup subsys ns
[ 0.004894] Initializing cgroup subsys cpuacct
[ 0.004955] Initializing cgroup subsys devices
[ 0.005052] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.005122] CPU: L2 Cache: 64K (64 bytes/line)
[ 0.005181] Intel machine check architecture supported.
[ 0.005242] Intel machine check reporting enabled on CPU#0.
[ 0.005336] Checking 'hlt' instruction... OK.
[ 0.020122] SMP alternatives: switching to UP code
[ 0.033615] Freeing SMP alternatives: 10k freed
[ 0.033687] ACPI: Core revision 20080609
[ 0.041767] ACPI: setting ELCR to 0800 (from 1c20)
[ 0.043679] weird, boot CPU (#0) not listedby the BIOS.
[ 0.043742] SMP motherboard not detected.
[ 0.043797] Local APIC not detected. Using dummy APIC emulation.
[ 0.043860] SMP disabled
[ 0.044083] Brought up 1 CPUs
[ 0.044140] Total of 1 processors activated (1599.21 BogoMIPS).
[ 0.044227] CPU0 attaching sched-domain:
[ 0.044234] domain 0: span 0 level CPU
[ 0.044241] groups: 0
[ 0.044908] net_namespace: 832 bytes
[ 0.044993] Booting paravirtualized kernel on bare hardware
[ 0.045779] NET: Registered protocol family 16
[ 0.046552] ACPI: bus type pci registered
[ 0.079946] PCI: PCI BIOS revision 2.10 entry at 0xfb160, last bus=1
[ 0.080010] PCI: Using configuration type 1 for base access
[ 0.082631] ACPI: EC: Look up EC in DSDT
[ 0.090615] ACPI: Interpreter enabled
[ 0.090688] ACPI: (supports S0 S1 S4 S5)
[ 0.090904] ACPI: Using PIC for interrupt routing
[ 0.101901] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.102163] PCI: 0000:00:00.0 reg 10 32bit mmio: [d0000000, d3ffffff]
[ 0.102208] pci 0000:00:00.0: Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 8d & 1f -> 0d
[ 0.102344] pci 0000:00:01.0: supports D1
[ 0.102461] PCI: 0000:00:07.1 reg 20 io port: [a000, a00f]
[ 0.102530] PCI: 0000:00:07.2 reg 20 io port: [a400, a41f]
[ 0.102598] PCI: 0000:00:07.3 reg 20 io port: [a800, a81f]
[ 0.102690] pci 0000:00:07.4: quirk: region 6000-607f claimed by vt82c686 HW-mon
[ 0.102768] pci 0000:00:07.4: quirk: region 5000-500f claimed by vt82c686 SMB
[ 0.102872] PCI: 0000:00:09.0 reg 10 io port: [b000, b0ff]
[ 0.102883] PCI: 0000:00:09.0 reg 14 32bit mmio: [da000000, da0000ff]
[ 0.102921] pci 0000:00:09.0: supports D1
[ 0.102925] pci 0000:00:09.0: supports D2
[ 0.102931] pci 0000:00:09.0: PME# supported from D1 D2 D3hot
[ 0.102995] pci 0000:00:09.0: PME# disabled
[ 0.103091] PCI: 0000:00:0a.0 reg 20 io port: [b400, b41f]
[ 0.103116] pci 0000:00:0a.0: supports D1
[ 0.103120] pci 0000:00:0a.0: supports D2
[ 0.103126] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.103193] pci 0000:00:0a.0: PME# disabled
[ 0.103291] PCI: 0000:00:0a.1 reg 20 io port: [b800, b81f]
[ 0.103316] pci 0000:00:0a.1: supports D1
[ 0.103321] pci 0000:00:0a.1: supports D2
[ 0.103326] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.103393] pci 0000:00:0a.1: PME# disabled
[ 0.103473] PCI: 0000:00:0a.2 reg 10 32bit mmio: [da001000, da0010ff]
[ 0.103515] pci 0000:00:0a.2: supports D1
[ 0.103519] pci 0000:00:0a.2: supports D2
[ 0.103524] pci 0000:00:0a.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.103591] pci 0000:00:0a.2: PME# disabled
[ 0.103680] PCI: 0000:00:0e.0 reg 10 io port: [bc00, bc1f]
[ 0.103720] pci 0000:00:0e.0: supports D1
[ 0.103725] pci 0000:00:0e.0: supports D2
[ 0.103754] PCI: 0000:00:0e.1 reg 10 io port: [c000, c007]
[ 0.103795] pci 0000:00:0e.1: supports D1
[ 0.103799] pci 0000:00:0e.1: supports D2
[ 0.103873] PCI: 0000:01:00.0 reg 10 32bit mmio: [d4000000, d7ffffff]
[ 0.103884] PCI: 0000:01:00.0 reg 14 io port: [9000, 90ff]
[ 0.103894] PCI: 0000:01:00.0 reg 18 32bit mmio: [d9000000, d9003fff]
[ 0.103918] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.103940] pci 0000:01:00.0: supports D1
[ 0.103978] PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
[ 0.104109] PCI: bridge 0000:00:01.0 32bit mmio: [d8000000, d9ffffff]
[ 0.104119] PCI: bridge 0000:00:01.0 32bit mmio pref: [d4000000, d7ffffff]
[ 0.104132] bus 00 -> node 0
[ 0.104166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.146081] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 0.146953] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[ 0.147815] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 0.148706] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
[ 0.149666] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.149833] pnp: PnP ACPI init
[ 0.149908] ACPI: bus type pnp registered
[ 0.158168] pnp: PnP ACPI: found 12 devices
[ 0.158237] ACPI: ACPI bus type pnp unregistered
[ 0.158301] PnPBIOS: Disabled by ACPI PNP
[ 0.159094] PCI: Using ACPI for IRQ routing
[ 0.159429] system 00:00: iomem range 0xcb000-0xcbfff has been reserved
[ 0.159429] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.159429] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.160037] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.160107] system 00:00: iomem range 0xfff0000-0xfffffff could not be reserved
[ 0.160184] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 0.160261] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.160328] system 00:00: iomem range 0x100000-0xffeffff could not be reserved
[ 0.160404] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.160490] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.196470] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.196547] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.196611] pci 0000:00:01.0: MEM window: 0xd8000000-0xd9ffffff
[ 0.196678] pci 0000:00:01.0: PREFETCH window: 0x000000d4000000-0x000000d7ffffff
[ 0.196772] pci 0000:00:01.0: setting latency timer to 64
[ 0.196781] bus: 00 index 0 io port: [0, ffff]
[ 0.196837] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.196894] bus: 01 index 0 io port: [9000, 9fff]
[ 0.196952] bus: 01 index 1 mmio: [d8000000, d9ffffff]
[ 0.197011] bus: 01 index 2 mmio: [d4000000, d7ffffff]
[ 0.197070] bus: 01 index 3 mmio: [0, 0]
[ 0.197192] NET: Registered protocol family 2
[ 0.197618] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.198286] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.198635] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.198987] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.199055] TCP reno registered
[ 0.199431] NET: Registered protocol family 1
[ 0.199793] checking if image is initramfs... it is
[ 0.650053] Freeing initrd memory: 2310k freed
[ 0.651812] audit: initializing netlink socket (disabled)
[ 0.651918] type=2000 audit(1223633266.648:1): initialized
[ 0.652318] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.652584] VFS: Disk quotas dquot_6.5.1
[ 0.652715] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.652873] msgmni has been set to 500
[ 0.653336] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.653423] io scheduler noop registered
[ 0.653477] io scheduler anticipatory registered
[ 0.653534] io scheduler deadline registered
[ 0.654560] io scheduler cfq registered (default)
[ 0.654646] pci 0000:00:00.0: Applying VIA southbridge workaround
[ 0.654714] PCI: VIA PCI bridge detected.Disabling DAC.
[ 0.654778] pci 0000:00:07.0: Disabling VIA external APIC routing
[ 0.654947] pci 0000:01:00.0: Boot video device
[ 0.655919] isapnp: Scanning for PnP cards...
[ 0.700035] Switched to high resolution mode on CPU 0
[ 1.010355] isapnp: No Plug & Play device found
[ 1.018876] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.019220] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.019564] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.020652] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.021148] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.025674] brd: module loaded
[ 1.026008] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.026077] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.026476] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.026958] mice: PS/2 mouse device common for all mice
[ 1.027402] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.027510] rtc0: alarms up to one year, y3k
[ 1.027677] cpuidle: using governor ladder
[ 1.027736] cpuidle: using governor menu
[ 1.027799] No iBFT detected.
[ 1.028955] TCP cubic registered
[ 1.029011] NET: Registered protocol family 17
[ 1.029102] Using IPI No-Shortcut mode
[ 1.029601] registered taskstats version 1
[ 1.029977] rtc_cmos 00:04: setting system clock to 2008-10-10 10:07:48 UTC (1223633268)
[ 1.031025] Freeing unused kernel memory: 280k freed
[ 1.058269] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.219209] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 1.219526] processor ACPI0007:00: registered as cooling_device0
[ 1.219598] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 2.163132] No dock devices found.
[ 2.293543] SCSI subsystem initialized
[ 2.302437] 8139too Fast Ethernet driver 0.9.28
[ 2.303526] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 2.303594] PCI: setting IRQ 11 as level-triggered
[ 2.303605] 8139too 0000:00:09.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 2.304739] eth0: RealTek RTL8139 at 0xb000, 00:05:1c:04:cf:92, IRQ 11
[ 2.304810] eth0: Identified 8139 chip type 'RTL-8139C'
[ 2.350734] usbcore: registered new interface driver usbfs
[ 2.350881] usbcore: registered new interface driver hub
[ 2.351026] usbcore: registered new device driver usb
[ 2.357284] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.408435] libata version 3.00 loaded.
[ 2.413629] USB Universal Host Controller Interface driver v3.0
[ 2.414717] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 2.414786] PCI: setting IRQ 10 as level-triggered
[ 2.414799] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 2.414897] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 2.415099] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 2.415216] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000a400
[ 2.415550] usb usb1: configuration #1 chosen from 1 choice
[ 2.415683] hub 1-0:1.0: USB hub found
[ 2.415760] hub 1-0:1.0: 2 ports detected
[ 2.514638] Floppy drive(s): fd0 is 1.44M
[ 2.531989] FDC 0 is a post-1991 82077
[ 2.620521] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.620603] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.620679] usb usb1: Product: UHCI Host Controller
[ 2.620737] usb usb1: Manufacturer: Linux 2.6.27-rc7 uhci_hcd
[ 2.620799] usb usb1: SerialNumber: 0000:00:07.2
[ 2.621037] uhci_hcd 0000:00:07.3: PCI INT D -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 2.621134] uhci_hcd 0000:00:07.3: UHCI Host Controller
[ 2.621255] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
[ 2.621368] uhci_hcd 0000:00:07.3: irq 10, io base 0x0000a800
[ 2.621677] usb usb2: configuration #1 chosen from 1 choice
[ 2.621820] hub 2-0:1.0: USB hub found
[ 2.621897] hub 2-0:1.0: 2 ports detected
[ 2.651389] Marking TSC unstable due to TSC halts in idle
[ 2.828379] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.828454] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.828529] usb usb2: Product: UHCI Host Controller
[ 2.828586] usb usb2: Manufacturer: Linux 2.6.27-rc7 uhci_hcd
[ 2.828649] usb usb2: SerialNumber: 0000:00:07.3
[ 2.829866] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
[ 2.829938] PCI: setting IRQ 12 as level-triggered
[ 2.829951] uhci_hcd 0000:00:0a.0: PCI INT A -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12
[ 2.830046] uhci_hcd 0000:00:0a.0: UHCI Host Controller
[ 2.830209] uhci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 3
[ 2.830324] uhci_hcd 0000:00:0a.0: irq 12, io base 0x0000b400
[ 2.830648] usb usb3: configuration #1 chosen from 1 choice
[ 2.830781] hub 3-0:1.0: USB hub found
[ 2.830855] hub 3-0:1.0: 2 ports detected
[ 2.940062] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 3.036376] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.036455] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.036530] usb usb3: Product: UHCI Host Controller
[ 3.036588] usb usb3: Manufacturer: Linux 2.6.27-rc7 uhci_hcd
[ 3.036649] usb usb3: SerialNumber: 0000:00:0a.0
[ 3.036818] uhci_hcd 0000:00:0a.1: PCI INT B -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 3.036915] uhci_hcd 0000:00:0a.1: UHCI Host Controller
[ 3.037057] uhci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 4
[ 3.037169] uhci_hcd 0000:00:0a.1: irq 10, io base 0x0000b800
[ 3.037485] usb usb4: configuration #1 chosen from 1 choice
[ 3.037622] hub 4-0:1.0: USB hub found
[ 3.037700] hub 4-0:1.0: 2 ports detected
[ 3.103685] usb 2-2: configuration #1 chosen from 1 choice
[ 3.109927] usb 2-2: New USB device found, idVendor=05e3, idProduct=0502
[ 3.110011] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.110084] usb 2-2: Product: USB Host To Host Bridge
[ 3.220064] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 3.244391] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.244467] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.244542] usb usb4: Product: UHCI Host Controller
[ 3.244600] usb usb4: Manufacturer: Linux 2.6.27-rc7 uhci_hcd
[ 3.244662] usb usb4: SerialNumber: 0000:00:0a.1
[ 3.245744] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 3.245820] PCI: setting IRQ 5 as level-triggered
[ 3.245832] ehci_hcd 0000:00:0a.2: PCI INT C -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 3.245937] ehci_hcd 0000:00:0a.2: EHCI Host Controller
[ 3.246104] ehci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 5
[ 3.246286] ehci_hcd 0000:00:0a.2: irq 5, io mem 0xda001000
[ 3.348134] ehci_hcd 0000:00:0a.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.348508] usb usb5: configuration #1 chosen from 1 choice
[ 3.348647] hub 5-0:1.0: USB hub found
[ 3.348730] hub 5-0:1.0: 4 ports detected
[ 3.556514] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.556596] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.556672] usb usb5: Product: EHCI Host Controller
[ 3.556730] usb usb5: Manufacturer: Linux 2.6.27-rc7 ehci_hcd
[ 3.556792] usb usb5: SerialNumber: 0000:00:0a.2
[ 3.599646] Uniform Multi-Platform E-IDE driver
[ 3.606517] via82cxxx 0000:00:07.1: VIA vt82c686b (rev 40) IDE UDMA100
[ 3.606602] via82cxxx 0000:00:07.1: IDE controller (0x1106:0x0571 rev 0x06)
[ 3.606730] via82cxxx 0000:00:07.1: not 100% native mode: will probe irqs later
[ 3.606812] ide0: BM-DMA at 0xa000-0xa007
[ 3.606883] ide1: BM-DMA at 0xa008-0xa00f
[ 3.606945] Probing IDE interface ide0...
[ 3.744061] usb 3-2: device not accepting address 2, error -71
[ 3.800071] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 4.020253] hda: Maxtor 91021U2, ATA DISK drive
[ 4.112056] usb 3-2: new low speed USB device using uhci_hcd and address 4
[ 4.288641] usb 3-2: configuration #1 chosen from 1 choice
[ 4.291872] usb 3-2: New USB device found, idVendor=046d, idProduct=c00e
[ 4.291956] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.292087] usb 3-2: Product: USB-PS/2 Optical Mouse
[ 4.292147] usb 3-2: Manufacturer: Logitech
[ 4.354123] usbcore: registered new interface driver hiddev
[ 4.367385] input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
[ 4.368497] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0a.0-2
[ 4.368768] usbcore: registered new interface driver usbhid
[ 4.368834] usbhid: v2.6:USB HID core driver
[ 4.692185] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 4.692396] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
[ 4.692487] hda: UDMA/33 mode selected
[ 4.692757] Probing IDE interface ide1...
[ 5.556253] hdc: AOPEN CD-RW CRW2040, ATAPI CD/DVD-ROM drive
[ 5.892194] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 5.892375] hdc: MWDMA2 mode selected
[ 5.892730] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.892869] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.941335] hda: max request size: 128KiB
[ 5.956425] hda: 20010816 sectors (10245 MB) w/512KiB Cache, CHS=19852/16/63
[ 5.956575] hda: cache flushes not supported
[ 5.956758] hda:<6>ide-cd driver 5.00
[ 5.968863] hda1 hda2 hda3 < hda5 hda6 hda7 >
[ 6.037216] ide-cd: Call ide_cdrom_setup
[ 6.037288] ide-cd: Call ide_cdrom_probe_capabilities, drive->media: 0x5, drive->atapi_flags: 0xa
[ 6.037370] ide-cd: Call ide_cdrom_get_capabilities
[ 6.038458] ide-cd: Call ide_cd_queue_pc, rq->cmd[0]: 0x5a, write: 0x0, timeout: 1750, cmd_flags: 0x0
[ 6.038583] ide-cd: Call ide_cd_do_request, rq->cmd_type: 0xb, block: 18446744073709551615
[ 6.038663] ide-cd: Call cdrom_do_block_pc, rq->cmd_type: 0xb
[ 6.038726] ide-cd: Call cdrom_start_packet_command, xferlen: 24
[ 6.038800] ide-cd: Call cdrom_transfer_packet_command
[ 6.039300] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x5a, write: 0x0
[ 6.039386] ide-cd: cdrom_newpc_intr: DRQ: stat: 0x58, thislen: 24
[ 6.039452] ide-cd: Call ide_cd_check_ireason, ireason: 0x2, rw: 0x0
[ 6.039518] ide-cd: cdrom_newpc_intr: data transfer, rq->cmd_type: 0xb, ireason: 0x2
[ 6.039707] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x5a, write: 0x0
[ 6.039782] ide-cd: cdrom_newpc_intr: DRQ: stat: 0x50, thislen: 0
[ 6.039846] ide-cd: Call ide_cd_request_sense_fixup
[ 6.039906] ide-cd: Call cdrom_end_request, cmd: 0x5a, uptodate: 0x1, nsectors: 0
[ 6.039982] ide-cd: Exit cdrom_end_request, uptodate: 0x1, nsectors: 1
[ 6.040502] ide-cd: Call ide_cdrom_update_speed
[ 6.040571] ide-cd: hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
[ 6.040799] ide-cd: Call ide_cdrom_register, nslots: 1
[ 6.040858] Uniform CD-ROM driver Revision: 3.20
[ 6.040922] ide-cd: Call ide_cd_read_toc
[ 6.040977] ide-cd: Call cdrom_check_status
[ 6.041033] ide-cd: Call ide_cd_queue_pc, rq->cmd[0]: 0x0, write: 0x0, timeout: 0, cmd_flags: 0x1000
[ 6.041148] ide-cd: Call ide_cd_do_request, rq->cmd_type: 0xb, block: 18446744073709551615
[ 6.041228] ide-cd: Call cdrom_do_block_pc, rq->cmd_type: 0xb
[ 6.041291] ide-cd: Call cdrom_start_packet_command, xferlen: 0
[ 6.041363] ide-cd: Call cdrom_transfer_packet_command
[ 6.041625] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x0, write: 0x0
[ 6.041701] ide-cd: cdrom_decode_status: stat: 0x51, good_stat: 0x0, rq->cmd_type: 0xb, err: 0x20
[ 6.041783] ide-cd: Call cdrom_queue_request_sense
[ 6.041840] ide-cd: failed_cmd: 0x0
[ 6.041904] ide-cd: Call ide_cd_do_request, rq->cmd_type: 0x3, block: 18446744073709551615
[ 6.041982] ide-cd: Call cdrom_do_block_pc, rq->cmd_type: 0x3
[ 6.042045] ide-cd: Call cdrom_start_packet_command, xferlen: 18
[ 6.042117] ide-cd: Call cdrom_transfer_packet_command
[ 6.042370] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x3, write: 0x0
[ 6.042446] ide-cd: cdrom_newpc_intr: DRQ: stat: 0x58, thislen: 18
[ 6.042511] ide-cd: Call ide_cd_check_ireason, ireason: 0x2, rw: 0x0
[ 6.042576] ide-cd: cdrom_newpc_intr: data transfer, rq->cmd_type: 0x3, ireason: 0x2
[ 6.042752] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x3, write: 0x0
[ 6.042825] ide-cd: cdrom_newpc_intr: DRQ: stat: 0x50, thislen: 0
[ 6.042887] ide-cd: Call ide_cd_request_sense_fixup
[ 6.042946] ide-cd: Call cdrom_end_request, cmd: 0x3, uptodate: 0x1, nsectors: 0
[ 6.043021] ide-cd: Call cdrom_analyze_sense_data, error_code: 0x70, sense_key: 0x2
[ 6.043098] ide-cd: cdrom_analyze_sense_data: failed cmd: 0x0
[ 6.043160] ATAPI device hdc:
[ 6.043208] Error: Not ready -- (Sense key=0x02)
[ 6.043300] Medium not present -- (asc=0x3a, ascq=0x00)
[ 6.043361] The failed "Test Unit Ready" packet command was:
[ 6.043365] "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "
[ 6.044118] ide-cd: Exit cdrom_end_request, uptodate: 0x1, nsectors: 1
[ 6.044223] ide-cd: Call cdrom_read_capacity
[ 6.044281] ide-cd: Call ide_cd_queue_pc, rq->cmd[0]: 0x25, write: 0x0, timeout: 0, cmd_flags: 0x1000
[ 6.044389] ide-cd: Call ide_cd_do_request, rq->cmd_type: 0xb, block: 18446744073709551615
[ 6.044467] ide-cd: Call cdrom_do_block_pc, rq->cmd_type: 0xb
[ 6.044529] ide-cd: Call cdrom_start_packet_command, xferlen: 8
[ 6.044601] ide-cd: Call cdrom_transfer_packet_command
[ 6.044844] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x25, write: 0x0
[ 6.044919] ide-cd: cdrom_decode_status: stat: 0x51, good_stat: 0x0, rq->cmd_type: 0xb, err: 0x20
[ 6.044999] ide-cd: Call cdrom_queue_request_sense
[ 6.045056] ide-cd: failed_cmd: 0x25
[ 6.045120] ide-cd: Call ide_cd_do_request, rq->cmd_type: 0x3, block: 18446744073709551615
[ 6.045198] ide-cd: Call cdrom_do_block_pc, rq->cmd_type: 0x3
[ 6.045260] ide-cd: Call cdrom_start_packet_command, xferlen: 18
[ 6.045333] ide-cd: Call cdrom_transfer_packet_command
[ 6.045710] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x3, write: 0x0
[ 6.045792] ide-cd: cdrom_newpc_intr: DRQ: stat: 0x58, thislen: 18
[ 6.045855] ide-cd: Call ide_cd_check_ireason, ireason: 0x2, rw: 0x0
[ 6.045921] ide-cd: cdrom_newpc_intr: data transfer, rq->cmd_type: 0x3, ireason: 0x2
[ 6.046144] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x3, write: 0x0
[ 6.046217] ide-cd: cdrom_newpc_intr: DRQ: stat: 0x50, thislen: 0
[ 6.046281] ide-cd: Call ide_cd_request_sense_fixup
[ 6.046339] ide-cd: Call cdrom_end_request, cmd: 0x3, uptodate: 0x1, nsectors: 0
[ 6.046415] ide-cd: Call cdrom_analyze_sense_data, error_code: 0x70, sense_key: 0x2
[ 6.046491] ide-cd: cdrom_analyze_sense_data: failed cmd: 0x25
[ 6.046555] ATAPI device hdc:
[ 6.046604] Error: Not ready -- (Sense key=0x02)
[ 6.046695] Medium not present -- (asc=0x3a, ascq=0x00)
[ 6.046757] The failed "Read Cd/Dvd Capacity" packet command was:
[ 6.046761] "25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "
[ 6.047453] ide-cd: Exit cdrom_end_request, uptodate: 0x1, nsectors: 1
[ 6.047550] ide-cd: Call cdrom_read_tocentry
[ 6.047608] ide-cd: Call ide_cd_queue_pc, rq->cmd[0]: 0x43, write: 0x0, timeout: 0, cmd_flags: 0x1000
[ 6.047719] ide-cd: Call ide_cd_do_request, rq->cmd_type: 0xb, block: 18446744073709551615
[ 6.047799] ide-cd: Call cdrom_do_block_pc, rq->cmd_type: 0xb
[ 6.047861] ide-cd: Call cdrom_start_packet_command, xferlen: 4
[ 6.047935] ide-cd: Call cdrom_transfer_packet_command
[ 6.048909] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x43, write: 0x0
[ 6.048998] ide-cd: cdrom_decode_status: stat: 0x51, good_stat: 0x0, rq->cmd_type: 0xb, err: 0x20
[ 6.049078] ide-cd: Call cdrom_queue_request_sense
[ 6.049135] ide-cd: failed_cmd: 0x43
[ 6.049211] ide-cd: Call ide_cd_do_request, rq->cmd_type: 0x3, block: 18446744073709551615
[ 6.049292] ide-cd: Call cdrom_do_block_pc, rq->cmd_type: 0x3
[ 6.049354] ide-cd: Call cdrom_start_packet_command, xferlen: 18
[ 6.049427] ide-cd: Call cdrom_transfer_packet_command
[ 6.049690] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x3, write: 0x0
[ 6.049761] ide-cd: cdrom_newpc_intr: DRQ: stat: 0x58, thislen: 18
[ 6.049824] ide-cd: Call ide_cd_check_ireason, ireason: 0x2, rw: 0x0
[ 6.049888] ide-cd: cdrom_newpc_intr: data transfer, rq->cmd_type: 0x3, ireason: 0x2
[ 6.050069] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x3, write: 0x0
[ 6.050144] ide-cd: cdrom_newpc_intr: DRQ: stat: 0x50, thislen: 0
[ 6.050207] ide-cd: Call ide_cd_request_sense_fixup
[ 6.050267] ide-cd: Call cdrom_end_request, cmd: 0x3, uptodate: 0x1, nsectors: 0
[ 6.050344] ide-cd: Call cdrom_analyze_sense_data, error_code: 0x70, sense_key: 0x2
[ 6.050419] ide-cd: cdrom_analyze_sense_data: failed cmd: 0x43
[ 6.050481] ATAPI device hdc:
[ 6.050529] Error: Not ready -- (Sense key=0x02)
[ 6.050621] Medium not present -- (asc=0x3a, ascq=0x00)
[ 6.050682] The failed "Read Table of Contents" packet command was:
[ 6.050686] "43 02 00 00 00 00 00 00 04 00 00 00 00 00 00 00 "
[ 6.051397] ide-cd: Exit cdrom_end_request, uptodate: 0x1, nsectors: 1
[ 6.074570] ide-cd: Call cdrom_check_status
[ 6.074649] ide-cd: Call ide_cd_queue_pc, rq->cmd[0]: 0x0, write: 0x0, timeout: 0, cmd_flags: 0x1000
[ 6.074783] ide-cd: Call ide_cd_do_request, rq->cmd_type: 0xb, block: 18446744073709551615
[ 6.074865] ide-cd: Call cdrom_do_block_pc, rq->cmd_type: 0xb
[ 6.074928] ide-cd: Call cdrom_start_packet_command, xferlen: 0
[ 6.075002] ide-cd: Call cdrom_transfer_packet_command
[ 6.075264] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x0, write: 0x0
[ 6.075340] ide-cd: cdrom_decode_status: stat: 0x51, good_stat: 0x0, rq->cmd_type: 0xb, err: 0x20
[ 6.075423] ide-cd: Call cdrom_queue_request_sense
[ 6.075479] ide-cd: failed_cmd: 0x0
[ 6.075543] ide-cd: Call ide_cd_do_request, rq->cmd_type: 0x3, block: 18446744073709551615
[ 6.075620] ide-cd: Call cdrom_do_block_pc, rq->cmd_type: 0x3
[ 6.075682] ide-cd: Call cdrom_start_packet_command, xferlen: 18
[ 6.075753] ide-cd: Call cdrom_transfer_packet_command
[ 6.076006] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x3, write: 0x0
[ 6.076131] ide-cd: cdrom_newpc_intr: DRQ: stat: 0x58, thislen: 18
[ 6.076196] ide-cd: Call ide_cd_check_ireason, ireason: 0x2, rw: 0x0
[ 6.076263] ide-cd: cdrom_newpc_intr: data transfer, rq->cmd_type: 0x3, ireason: 0x2
[ 6.076475] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x3, write: 0x0
[ 6.076549] ide-cd: cdrom_newpc_intr: DRQ: stat: 0x50, thislen: 0
[ 6.076612] ide-cd: Call ide_cd_request_sense_fixup
[ 6.076670] ide-cd: Call cdrom_end_request, cmd: 0x3, uptodate: 0x1, nsectors: 0
[ 6.076745] ide-cd: Call cdrom_analyze_sense_data, error_code: 0x70, sense_key: 0x2
[ 6.076821] ide-cd: cdrom_analyze_sense_data: failed cmd: 0x0
[ 6.076882] ATAPI device hdc:
[ 6.076931] Error: Not ready -- (Sense key=0x02)
[ 6.077022] Medium not present -- (asc=0x3a, ascq=0x00)
[ 6.077084] The failed "Test Unit Ready" packet command was:
[ 6.077088] "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "
[ 6.077792] ide-cd: Exit cdrom_end_request, uptodate: 0x1, nsectors: 1
[ 6.079598] ide-cd: Call ide_cd_read_toc
[ 6.079661] ide-cd: Call cdrom_check_status
[ 6.079718] ide-cd: Call ide_cd_queue_pc, rq->cmd[0]: 0x0, write: 0x0, timeout: 0, cmd_flags: 0x1000
[ 6.080940] ide-cd: Call ide_cd_do_request, rq->cmd_type: 0xb, block: 18446744073709551615
[ 6.081020] ide-cd: Call cdrom_do_block_pc, rq->cmd_type: 0xb
[ 6.081083] ide-cd: Call cdrom_start_packet_command, xferlen: 0
[ 6.081156] ide-cd: Call cdrom_transfer_packet_command
[ 6.081396] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x0, write: 0x0
[ 6.081469] ide-cd: cdrom_decode_status: stat: 0x51, good_stat: 0x0, rq->cmd_type: 0xb, err: 0x20
[ 6.081550] ide-cd: Call cdrom_queue_request_sense
[ 6.081606] ide-cd: failed_cmd: 0x0
[ 6.081668] ide-cd: Call ide_cd_do_request, rq->cmd_type: 0x3, block: 18446744073709551615
[ 6.081745] ide-cd: Call cdrom_do_block_pc, rq->cmd_type: 0x3
[ 6.081806] ide-cd: Call cdrom_start_packet_command, xferlen: 18
[ 6.081877] ide-cd: Call cdrom_transfer_packet_command
[ 6.082141] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x3, write: 0x0
[ 6.082215] ide-cd: cdrom_newpc_intr: DRQ: stat: 0x58, thislen: 18
[ 6.082282] ide-cd: Call ide_cd_check_ireason, ireason: 0x2, rw: 0x0
[ 6.082347] ide-cd: cdrom_newpc_intr: data transfer, rq->cmd_type: 0x3, ireason: 0x2
[ 6.082524] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x3, write: 0x0
[ 6.082596] ide-cd: cdrom_newpc_intr: DRQ: stat: 0x50, thislen: 0
[ 6.082659] ide-cd: Call ide_cd_request_sense_fixup
[ 6.082717] ide-cd: Call cdrom_end_request, cmd: 0x3, uptodate: 0x1, nsectors: 0
[ 6.082793] ide-cd: Call cdrom_analyze_sense_data, error_code: 0x70, sense_key: 0x2
[ 6.082868] ide-cd: cdrom_analyze_sense_data: failed cmd: 0x0
[ 6.082929] ATAPI device hdc:
[ 6.082978] Error: Not ready -- (Sense key=0x02)
[ 6.083069] Medium not present -- (asc=0x3a, ascq=0x00)
[ 6.083130] The failed "Test Unit Ready" packet command was:
[ 6.083134] "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "
[ 6.083825] ide-cd: Exit cdrom_end_request, uptodate: 0x1, nsectors: 1
[ 6.085619] ide-cd: Call cdrom_read_capacity
[ 6.085695] ide-cd: Call ide_cd_queue_pc, rq->cmd[0]: 0x25, write: 0x0, timeout: 0, cmd_flags: 0x1000
[ 6.085818] ide-cd: Call ide_cd_do_request, rq->cmd_type: 0xb, block: 18446744073709551615
[ 6.085898] ide-cd: Call cdrom_do_block_pc, rq->cmd_type: 0xb
[ 6.085960] ide-cd: Call cdrom_start_packet_command, xferlen: 8
[ 6.086033] ide-cd: Call cdrom_transfer_packet_command
[ 6.086269] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x25, write: 0x0
[ 6.086347] ide-cd: cdrom_decode_status: stat: 0x51, good_stat: 0x0, rq->cmd_type: 0xb, err: 0x20
[ 6.086428] ide-cd: Call cdrom_queue_request_sense
[ 6.086485] ide-cd: failed_cmd: 0x25
[ 6.086548] ide-cd: Call ide_cd_do_request, rq->cmd_type: 0x3, block: 18446744073709551615
[ 6.086627] ide-cd: Call cdrom_do_block_pc, rq->cmd_type: 0x3
[ 6.086690] ide-cd: Call cdrom_start_packet_command, xferlen: 18
[ 6.086762] ide-cd: Call cdrom_transfer_packet_command
[ 6.087061] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x3, write: 0x0
[ 6.087137] ide-cd: cdrom_newpc_intr: DRQ: stat: 0x58, thislen: 18
[ 6.087201] ide-cd: Call ide_cd_check_ireason, ireason: 0x2, rw: 0x0
[ 6.087266] ide-cd: cdrom_newpc_intr: data transfer, rq->cmd_type: 0x3, ireason: 0x2
[ 6.087485] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x3, write: 0x0
[ 6.087558] ide-cd: cdrom_newpc_intr: DRQ: stat: 0x50, thislen: 0
[ 6.087622] ide-cd: Call ide_cd_request_sense_fixup
[ 6.087680] ide-cd: Call cdrom_end_request, cmd: 0x3, uptodate: 0x1, nsectors: 0
[ 6.087757] ide-cd: Call cdrom_analyze_sense_data, error_code: 0x70, sense_key: 0x2
[ 6.087834] ide-cd: cdrom_analyze_sense_data: failed cmd: 0x25
[ 6.087896] ATAPI device hdc:
[ 6.087946] Error: Not ready -- (Sense key=0x02)
[ 6.088092] Medium not present -- (asc=0x3a, ascq=0x00)
[ 6.088155] The failed "Read Cd/Dvd Capacity" packet command was:
[ 6.088159] "25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "
[ 6.088875] ide-cd: Exit cdrom_end_request, uptodate: 0x1, nsectors: 1
[ 6.089009] ide-cd: Call cdrom_read_tocentry
[ 6.089068] ide-cd: Call ide_cd_queue_pc, rq->cmd[0]: 0x43, write: 0x0, timeout: 0, cmd_flags: 0x1000
[ 6.089174] ide-cd: Call ide_cd_do_request, rq->cmd_type: 0xb, block: 18446744073709551615
[ 6.089252] ide-cd: Call cdrom_do_block_pc, rq->cmd_type: 0xb
[ 6.089316] ide-cd: Call cdrom_start_packet_command, xferlen: 4
[ 6.089388] ide-cd: Call cdrom_transfer_packet_command
[ 6.090405] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x43, write: 0x0
[ 6.090493] ide-cd: cdrom_decode_status: stat: 0x51, good_stat: 0x0, rq->cmd_type: 0xb, err: 0x20
[ 6.090576] ide-cd: Call cdrom_queue_request_sense
[ 6.090634] ide-cd: failed_cmd: 0x43
[ 6.090713] ide-cd: Call ide_cd_do_request, rq->cmd_type: 0x3, block: 18446744073709551615
[ 6.090792] ide-cd: Call cdrom_do_block_pc, rq->cmd_type: 0x3
[ 6.090856] ide-cd: Call cdrom_start_packet_command, xferlen: 18
[ 6.090929] ide-cd: Call cdrom_transfer_packet_command
[ 6.091187] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x3, write: 0x0
[ 6.091262] ide-cd: cdrom_newpc_intr: DRQ: stat: 0x58, thislen: 18
[ 6.091328] ide-cd: Call ide_cd_check_ireason, ireason: 0x2, rw: 0x0
[ 6.091394] ide-cd: cdrom_newpc_intr: data transfer, rq->cmd_type: 0x3, ireason: 0x2
[ 6.091676] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x3, write: 0x0
[ 6.091751] ide-cd: cdrom_newpc_intr: DRQ: stat: 0x50, thislen: 0
[ 6.091815] ide-cd: Call ide_cd_request_sense_fixup
[ 6.091873] ide-cd: Call cdrom_end_request, cmd: 0x3, uptodate: 0x1, nsectors: 0
[ 6.091949] ide-cd: Call cdrom_analyze_sense_data, error_code: 0x70, sense_key: 0x2
[ 6.092075] ide-cd: cdrom_analyze_sense_data: failed cmd: 0x43
[ 6.092139] ATAPI device hdc:
[ 6.092187] Error: Not ready -- (Sense key=0x02)
[ 6.092280] Medium not present -- (asc=0x3a, ascq=0x00)
[ 6.092341] The failed "Read Table of Contents" packet command was:
[ 6.092345] "43 02 00 00 00 00 00 00 04 00 00 00 00 00 00 00 "
[ 6.093058] ide-cd: Exit cdrom_end_request, uptodate: 0x1, nsectors: 1
[ 6.093341] ide-cd: Call ide_cd_do_request, rq->cmd_type: 0x2, block: 18446744073709551615
[ 6.093425] Sending BLOCK_PC to drive! Fixed.
[ 6.093482] Original rq: : dev hdc: type=2, flags=504c8
[ 6.093544] sector 18446744073709551615, nr/cnr 0/0
[ 6.093603] bio cf87b5a0, biotail cf87b5a0, buffer 00000000, data 00000000, len 36
[ 6.093678] cdb: 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
[ 6.094292] rq->cmd_len: 6
[ 6.094345] Pid: 806, comm: cdrom_id Not tainted 2.6.27-rc7 #1
[ 6.094423] [<d091cd0b>] ide_cd_do_request+0x4d9/0x6c6 [ide_cd_mod]
[ 6.094546] [<c01e9b50>] __const_udelay+0x29/0x2a
[ 6.094647] [<d0900b68>] __ide_wait_stat+0xab/0xd6 [ide_core]
[ 6.094808] [<d090168b>] ide_wait_stat+0x3f/0x6c [ide_core]
[ 6.094931] [<d08ffdc3>] ide_do_request+0x671/0x876 [ide_core]
[ 6.095055] [<c02bdc3c>] _spin_lock_irqsave+0x23/0x29
[ 6.095152] [<c012b978>] lock_timer_base+0x19/0x35
[ 6.095251] [<c012b978>] lock_timer_base+0x19/0x35
[ 6.095343] [<c012ba3c>] del_timer+0x4a/0x50
[ 6.095433] [<c01d855f>] elv_insert+0xc2/0x1d6
[ 6.095526] [<c01dc491>] blk_execute_rq_nowait+0x5a/0x87
[ 6.095626] [<c01dc539>] blk_execute_rq+0x7b/0x96
[ 6.095719] [<c01dc414>] blk_end_sync_rq+0x0/0x23
[ 6.095811] [<c0199e84>] bio_add_pc_page+0x16/0x1b
[ 6.095906] [<c019a422>] bio_copy_user_iov+0x10d/0x169
[ 6.096001] [<c01d8c05>] blk_rq_bio_prep+0x73/0xa6
[ 6.096143] [<c01dc266>] blk_rq_append_bio+0x11/0x3a
[ 6.096237] [<c01dc37e>] blk_rq_map_user+0xef/0x185
[ 6.096332] [<c01deb90>] sg_io+0x1eb/0x2c8
[ 6.096425] [<c01df0bb>] scsi_cmd_ioctl+0x1b8/0x40d
[ 6.096520] [<c015a744>] find_get_page+0x1f/0x81
[ 6.096619] [<c015ab06>] find_lock_page+0x10/0x43
[ 6.096711] [<c015b12a>] filemap_fault+0x1f3/0x344
[ 6.096823] [<d0915c5e>] cdrom_ioctl+0x25/0xb31 [cdrom]
[ 6.096933] [<c0167d5e>] handle_mm_fault+0x2f5/0x6e9
[ 6.097034] [<d091c4aa>] idecd_ioctl+0x12d/0x142 [ide_cd_mod]
[ 6.097138] [<c018036c>] do_lookup+0x53/0x153
[ 6.097235] [<c0188932>] dput+0x16/0x103
[ 6.097329] [<c01dd0cb>] blkdev_driver_ioctl+0x4b/0x5b
[ 6.097426] [<c01dd795>] blkdev_ioctl+0x6ba/0x6d9
[ 6.097519] [<c019b4ae>] blkdev_open+0x0/0x4d
[ 6.097612] [<c019b4d3>] blkdev_open+0x25/0x4d
[ 6.097702] [<c0178ae5>] __dentry_open+0x130/0x1fc
[ 6.097804] [<c0178c2e>] nameidata_to_filp+0x1c/0x2c
[ 6.097899] [<c0183405>] do_filp_open+0x34b/0x6a0
[ 6.097994] [<c011511f>] __ptep_modify_prot_start+0x16/0x2e
[ 6.098104] [<c019aaf9>] block_ioctl+0x13/0x16
[ 6.098195] [<c019aae6>] block_ioctl+0x0/0x16
[ 6.098286] [<c01840ac>] vfs_ioctl+0x1c/0x5f
[ 6.098376] [<c0184331>] do_vfs_ioctl+0x242/0x255
[ 6.098466] [<c017894e>] do_sys_open+0xaa/0xb2
[ 6.098557] [<c0184385>] sys_ioctl+0x41/0x58
[ 6.098646] [<c010398e>] syscall_call+0x7/0xb
[ 6.098742] =======================
[ 6.098794] ide-cd: Call cdrom_do_block_pc, rq->cmd_type: 0xb
[ 6.098857] ide-cd: Call cdrom_start_packet_command, xferlen: 36
[ 6.098931] ide-cd: Call cdrom_transfer_packet_command
[ 6.099563] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x12, write: 0x0
[ 6.099649] ide-cd: cdrom_newpc_intr: DRQ: stat: 0x58, thislen: 36
[ 6.099713] ide-cd: Call ide_cd_check_ireason, ireason: 0x2, rw: 0x0
[ 6.099778] ide-cd: cdrom_newpc_intr: data transfer, rq->cmd_type: 0xb, ireason: 0x2
[ 6.099953] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x12, write: 0x0
[ 6.100070] ide-cd: cdrom_newpc_intr: DRQ: stat: 0x50, thislen: 0
[ 6.100134] ide-cd: Call ide_cd_request_sense_fixup
[ 6.100193] ide-cd: Call cdrom_end_request, cmd: 0x12, uptodate: 0x1, nsectors: 0
[ 6.101294] ide-cd: Exit cdrom_end_request, uptodate: 0x1, nsectors: 1
[ 6.108015] ide-cd: Call ide_cd_do_request, rq->cmd_type: 0x2, block: 18446744073709551615
[ 6.108165] Sending BLOCK_PC to drive! Fixed.
[ 6.108224] Original rq: : dev hdc: type=2, flags=504c8
[ 6.108286] sector 18446744073709551615, nr/cnr 0/0
[ 6.108346] bio cf87b5a0, biotail cf87b5a0, buffer 00000000, data 00000000, len 8
[ 6.108421] cdb: 46 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00
[ 6.109036] rq->cmd_len: 10
[ 6.109088] Pid: 806, comm: cdrom_id Not tainted 2.6.27-rc7 #1
[ 6.109164] [<d091cd0b>] ide_cd_do_request+0x4d9/0x6c6 [ide_cd_mod]
[ 6.109289] [<c01e9b50>] __const_udelay+0x29/0x2a
[ 6.109386] [<d0900b68>] __ide_wait_stat+0xab/0xd6 [ide_core]
[ 6.109545] [<d090168b>] ide_wait_stat+0x3f/0x6c [ide_core]
[ 6.109670] [<d08ffdc3>] ide_do_request+0x671/0x876 [ide_core]
[ 6.109794] [<c02bdc3c>] _spin_lock_irqsave+0x23/0x29
[ 6.109890] [<c012b978>] lock_timer_base+0x19/0x35
[ 6.109990] [<c012b978>] lock_timer_base+0x19/0x35
[ 6.110084] [<c012ba3c>] del_timer+0x4a/0x50
[ 6.110174] [<c01d855f>] elv_insert+0xc2/0x1d6
[ 6.110267] [<c01dc491>] blk_execute_rq_nowait+0x5a/0x87
[ 6.110369] [<c01dc539>] blk_execute_rq+0x7b/0x96
[ 6.110461] [<c01dc414>] blk_end_sync_rq+0x0/0x23
[ 6.110553] [<c0199e84>] bio_add_pc_page+0x16/0x1b
[ 6.110647] [<c019a422>] bio_copy_user_iov+0x10d/0x169
[ 6.110742] [<c01d8c05>] blk_rq_bio_prep+0x73/0xa6
[ 6.110835] [<c01dc266>] blk_rq_append_bio+0x11/0x3a
[ 6.110929] [<c01dc37e>] blk_rq_map_user+0xef/0x185
[ 6.111021] [<c01deb90>] sg_io+0x1eb/0x2c8
[ 6.111115] [<c01df0bb>] scsi_cmd_ioctl+0x1b8/0x40d
[ 6.111209] [<c015a744>] find_get_page+0x1f/0x81
[ 6.111307] [<c015ab06>] find_lock_page+0x10/0x43
[ 6.111400] [<c015b12a>] filemap_fault+0x1f3/0x344
[ 6.111493] [<d0915c5e>] cdrom_ioctl+0x25/0xb31 [cdrom]
[ 6.111601] [<c0167d5e>] handle_mm_fault+0x2f5/0x6e9
[ 6.111700] [<d091c4aa>] idecd_ioctl+0x12d/0x142 [ide_cd_mod]
[ 6.111803] [<c018036c>] do_lookup+0x53/0x153
[ 6.111899] [<c0188932>] dput+0x16/0x103
[ 6.111992] [<c01dd0cb>] blkdev_driver_ioctl+0x4b/0x5b
[ 6.112150] [<c01dd795>] blkdev_ioctl+0x6ba/0x6d9
[ 6.112244] [<c019b4ae>] blkdev_open+0x0/0x4d
[ 6.112336] [<c019b4d3>] blkdev_open+0x25/0x4d
[ 6.112426] [<c0178ae5>] __dentry_open+0x130/0x1fc
[ 6.112528] [<c0178c2e>] nameidata_to_filp+0x1c/0x2c
[ 6.112621] [<c0183405>] do_filp_open+0x34b/0x6a0
[ 6.112715] [<c011511f>] __ptep_modify_prot_start+0x16/0x2e
[ 6.112823] [<c019aaf9>] block_ioctl+0x13/0x16
[ 6.112913] [<c019aae6>] block_ioctl+0x0/0x16
[ 6.113003] [<c01840ac>] vfs_ioctl+0x1c/0x5f
[ 6.113095] [<c0184331>] do_vfs_ioctl+0x242/0x255
[ 6.113185] [<c017894e>] do_sys_open+0xaa/0xb2
[ 6.113276] [<c0184385>] sys_ioctl+0x41/0x58
[ 6.113365] [<c010398e>] syscall_call+0x7/0xb
[ 6.113460] =======================
[ 6.113531] ide-cd: Call cdrom_do_block_pc, rq->cmd_type: 0xb
[ 6.113594] ide-cd: Call cdrom_start_packet_command, xferlen: 8
[ 6.113667] ide-cd: Call cdrom_transfer_packet_command
[ 6.115773] ide-cd: Call cdrom_newpc_intr, rq->cmd[0]: 0x46, write: 0x0
[ 6.115862] ide-cd: cdrom_decode_status: stat: 0x59, good_stat: 0x0, rq->cmd_type: 0xb, err: 0x20
[ 6.115945] ide-cd: Call cdrom_queue_request_sense
[ 6.116003] ide-cd: failed_cmd: 0x46
[ 6.116143] hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
[ 6.116387] hdc: status error: error=0x20 { LastFailedSense=0x02 }
[ 6.116547] ide: failed opcode was: unknown
[ 6.116643] hdc: drive not ready for command 0x3
[ 181.548254] PM: Starting manual resume from disk
[ 181.661486] kjournald starting. Commit interval 5 seconds
[ 181.661590] EXT3-fs: mounted filesystem with ordered data mode.
[ 184.598661] udevd version 125 started
[ 185.162317] ide-cd: Call cdrom_check_status
[ 185.162406] ide-cd: Call ide_cd_queue_pc, rq->cmd[0]: 0x0, write: 0x0, timeout: 0, cmd_flags: 0x1000
[ 185.162557] hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
[ 185.162802] hdc: status error: error=0x20 { LastFailedSense=0x02 }
[ 185.162965] ide: failed opcode was: unknown
[ 185.163064] hdc: drive not ready for command 0x0
[ 185.163136] ide-cd: Call ide_cd_read_toc
[ 185.163190] ide-cd: Call cdrom_check_status
[ 185.163245] ide-cd: Call ide_cd_queue_pc, rq->cmd[0]: 0x0, write: 0x0, timeout: 0, cmd_flags: 0x1000
[ 185.163354] hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
[ 185.163596] hdc: status error: error=0x20 { LastFailedSense=0x02 }
[ 185.163756] ide: failed opcode was: unknown
[ 185.163845] hdc: drive not ready for command 0x0
[ 185.163904] ide-cd: Call cdrom_read_capacity
[ 185.163960] ide-cd: Call ide_cd_queue_pc, rq->cmd[0]: 0x25, write: 0x0, timeout: 0, cmd_flags: 0x1000
[ 185.164201] hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
[ 185.164446] hdc: status error: error=0x20 { LastFailedSense=0x02 }
[ 185.164604] ide: failed opcode was: unknown
[ 185.164712] hdc: drive not ready for command 0x25
[ 185.164772] ide-cd: hdc: weird block size 0
[ 185.164826] ide-cd: hdc: default to 2kb block size
[ 185.164883] ide-cd: Call cdrom_read_tocentry
[ 185.164938] ide-cd: Call ide_cd_queue_pc, rq->cmd[0]: 0x43, write: 0x0, timeout: 0, cmd_flags: 0x1000
[ 185.165047] hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
[ 185.165287] hdc: status error: error=0x20 { LastFailedSense=0x02 }
[ 185.165446] ide: failed opcode was: unknown
[ 185.165535] hdc: drive not ready for command 0x43
[ 185.165592] ide-cd: Call cdrom_read_tocentry
[ 185.165649] ide-cd: Call ide_cd_queue_pc, rq->cmd[0]: 0x43, write: 0x0, timeout: 0, cmd_flags: 0x1000
[ 185.165757] hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
[ 185.166002] hdc: status error: error=0x20 { LastFailedSense=0x02 }
[ 185.166160] ide: failed opcode was: unknown
[ 185.166248] hdc: drive not ready for command 0x43
[ 185.166307] ide-cd: Call cdrom_read_tocentry
[ 185.166363] ide-cd: Call ide_cd_queue_pc, rq->cmd[0]: 0x43, write: 0x0, timeout: 0, cmd_flags: 0x1000
[ 185.166472] hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
[ 185.166709] hdc: status error: error=0x20 { LastFailedSense=0x02 }
[ 185.166867] ide: failed opcode was: unknown
[ 185.166956] hdc: drive not ready for command 0x43
[ 185.167016] ide-cd: Call ide_cd_queue_pc, rq->cmd[0]: 0x51, write: 0x0, timeout: 1750, cmd_flags: 0x1000
[ 185.167124] hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
[ 185.167363] hdc: status error: error=0x20 { LastFailedSense=0x02 }
[ 185.167525] ide: failed opcode was: unknown
[ 185.167614] hdc: drive not ready for command 0x51
[ 185.167674] ide-cd: Call ide_cd_queue_pc, rq->cmd[0]: 0x51, write: 0x0, timeout: 1750, cmd_flags: 0x1000
[ 185.167782] hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
[ 185.168020] hdc: status error: error=0x20 { LastFailedSense=0x02 }
[ 185.168077] ide: failed opcode was: unknown
[ 185.168296] hdc: drive not ready for command 0x51
[ 185.168538] hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
[ 185.168804] hdc: status error: error=0x20 { LastFailedSense=0x02 }
[ 185.168980] ide: failed opcode was: unknown
[ 185.169139] hdc: drive not ready for command 0x12
[ 185.174611] ide-cd: Call cdrom_check_status
[ 185.174689] ide-cd: Call ide_cd_queue_pc, rq->cmd[0]: 0x0, write: 0x0, timeout: 0, cmd_flags: 0x1000
[ 185.174842] hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
[ 185.175085] hdc: status error: error=0x20 { LastFailedSense=0x02 }
[ 185.175245] ide: failed opcode was: unknown
[ 185.175342] hdc: drive not ready for command 0x0
[ 186.570979] Linux agpgart interface v0.103
[ 186.578923] input: Power Button (FF) as /class/input/input2
[ 186.594914] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 186.609124] ACPI: Power Button (FF) [PWRF]
[ 186.609390] input: Power Button (CM) as /class/input/input3
[ 186.609770] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
[ 186.616334] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xd0000000
[ 186.635238] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 186.640310] ACPI: Power Button (CM) [PWRB]
[ 186.640573] input: Sleep Button (CM) as /class/input/input4
[ 186.672347] ACPI: Sleep Button (CM) [SLPB]
[ 186.740744] parport_pc: VIA 686A/8231 detected
[ 186.740753] parport_pc: probing current configuration
[ 186.740777] parport_pc: Current parallel port base: 0x378
[ 186.740834] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 186.836302] parport_pc: VIA parallel port: io=0x378, irq=7
[ 187.093783] usb0: register 'gl620a' at usb-0000:00:07.3-2, Genesys GeneLink, 8e:0c:76:3f:2e:4e
[ 187.093921] usbcore: registered new interface driver gl620a
[ 187.214473] gameport: EMU10K1 is pci0000:00:0e.1/gameport0, io 0xc000, speed 1269kHz
[ 187.255309] input: PC Speaker as /class/input/input5
[ 187.567785] EMU10K1_Audigy 0000:00:0e.0: PCI INT A -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12
[ 190.071417] Adding 489940k swap on /dev/hda1. Priority:-1 extents:1 across:489940k
[ 190.512199] EXT3 FS on hda6, internal journal
[ 191.251755] loop: module loaded
[ 192.443864] kjournald starting. Commit interval 5 seconds
[ 192.444345] EXT3 FS on hda5, internal journal
[ 192.444445] EXT3-fs: mounted filesystem with ordered data mode.
[ 192.477206] kjournald starting. Commit interval 5 seconds
[ 192.477580] EXT3 FS on hda2, internal journal
[ 192.477676] EXT3-fs: mounted filesystem with ordered data mode.
[ 192.513351] kjournald starting. Commit interval 5 seconds
[ 192.513794] EXT3 FS on hda7, internal journal
[ 192.513891] EXT3-fs: mounted filesystem with ordered data mode.
[ 194.152380] NET: Registered protocol family 10
[ 194.153822] lo: Disabled Privacy Extensions
[ 194.277026] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 198.247293] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[ 198.247649] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
[ 198.247726] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[ 198.247803] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 198.358720] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 201.470626] lp0: using parport0 (interrupt-driven).
[ 201.493718] ppdev: user-space parallel port driver
[ 204.912067] eth0: no IPv6 routers present
[ 205.124738] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
