Re: ide dvd burner detected as ide-tape

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thursday 09 October 2008, Thomas Drillich wrote:
> Am Mittwoch, 8. Oktober 2008 schrieb Bartlomiej Zolnierkiewicz:
> > [ added linux-ide@ to cc: ]
> >
> > On Saturday 04 October 2008, Thomas Drillich wrote:
> > > Am Freitag, 3. Oktober 2008 schrieb Bartlomiej Zolnierkiewicz:
> > > > On Wednesday 01 October 2008, Kay Sievers wrote:
> > > > > On Wed, Oct 1, 2008 at 1:00 AM, Thomas Drillich <th@xxxxxxxxxxxx> 
> wrote:
> > > > > > I found in the syslog:
> > > > > > Sep 30 13:44:44 localhost kernel: ide-tape: hda <-> ht0:
> > > > > > HH-@T)SPȴ/�����1*00 DRD)RAM
> > > > > > GH22LP20P�{�����л�����HH-@T)SPȴ/�����1*00 rev 1*00
> > > > > > Sep 30 13:44:44 localhost kernel: ide-tape: ht0: I/O error, pc =
> > > > > > 1a, key =  5, asc = 64, ascq =  0
> > > > > > Sep 30 13:44:44 localhost kernel: ide-tape: hda: invalid tape speed
> > > > > > (assuming 650KB/sec)
> > > > > > Sep 30 13:44:44 localhost kernel: ide-tape: hda: invalid max_speed
> > > > > > (assuming 650KB/sec)
> > > > > > Sep 30 13:44:44 localhost kernel: ide-tape: ht0: I/O error, pc =
> > > > > > 1a, key =  5, asc = 64, ascq =  0
> > > > > > Sep 30 13:47:17 localhost kernel: ide-tape: hda <-> ht0:
> > > > > > HH-@T)SPȴ/�����1*00 DRD)RAM
> > > > > > GH22LP20P�{�����������HH-@T)SPȴ/�����1*00 rev 1*00
> > > > > > Sep 30 13:47:17 localhost kernel: ide-tape: ht0: I/O error, pc =
> > > > > > 1a, key =  5, asc = 64, ascq =  0
> > > > > > Sep 30 13:47:17 localhost kernel: ide-tape: hda: invalid tape speed
> > > > > > (assuming 650KB/sec)
> > > > > > Sep 30 13:47:17 localhost kernel: ide-tape: hda: invalid max_speed
> > > > > > (assuming 650KB/sec)
> > > > > > Sep 30 13:47:17 localhost kernel: ide-tape: ht0: I/O error, pc =
> > > > > > 1a, key =  5, asc = 64, ascq =  0
> > > > > > -- end snip
> > > > > >
> > > > > > but its a LG GH22LP20 DVD burner
> > > > > >
> > > > > > cat /sys/bus/ide/devices/0.0/model returns
> > > > > >        HL)DP-ST@V@-RAI CH22HP20
> > > > > >
> > > > > > what can I do ?
> > > > >
> > > > > Bart, any idea what's going wrong here, or how to work around it?
> > > >
> > > > ide-tape driving DVD burner is a "CANNOT happen" case...
> > > >
> > > > Thomas, which kernel version is it?  Please post a full dmesg output.
> > >
> > > Seems that can happen Bart ;-)
> > >
> > > it's a 2.6.26.5 kernel running on debian/testing.
> > >
> > > I moved ide now to module
> > >  alim15x3                7504  0 [permanent]
> > >  ide_pci_generic         5252  0 [permanent]
> > >  ide_core              140572  2 ide_pci_generic,alim15x3
> > >
> > > but it didn't changed anything .. as expected.
> > >
> > > >lspci
> > >
> > >  00:1f.0 IDE interface: ALi Corporation M5229 IDE (rev c7)
> > >
> > > I added /proc/config.gz to the dmesg output
> >
> > Linux version 2.6.26.5-3.00-st20g5 (root@mzpc) (gcc version 4.3.1 (Debian
> > 4.3.1-9) ) #1 SMP PREEMPT Fri Oct 3 12:42:56 CEST 2008 ...
> > ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc7) at  PCI slot 0000:00:1f.0
> > ACPI: PCI Interrupt 0000:00:1f.0[A] -> GSI 19 (level, low) -> IRQ 19
> > ALI15X3: not 100% native mode: will probe irqs later
> >     ide0: BM-DMA at 0x8880-0x8887
> >     ide1: BM-DMA at 0x8888-0x888f
> > Probing IDE interface ide0...
> > ...
> > hda: HL)DP-ST@V@-RAI CH22HP20, ATAPI TAPE drive
> > ...
> >
> > so this is a probing time device type misdectection
> > (yeah, the impossible has just happened ;).
> >
> > Does BIOS also detect this device as "HL)DP-ST@V@-RAI"?
> yes
> >
> > Please send the output of "hdparm --Istdout /dev/hda" so we can check
> > whether the problem is a bogus (corrupted?) identify data or some issue
> > with the device type detection code...
> I'm not able to run hdparam on /dev/hda, udev won't create the device file and
> if I create the device file manually hdparam just stop working.
> 
> I'd attached cat /proc/ide/hda/identify (hda.identify.txt.gz).
> 
> >
> > Could you also try 2.6.27-rc9?
> no changes in that kernel version .. I attachted output of dmesg of that 
> kernel version.

Thanks.  Does the following patch help?

From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Subject: [PATCH] ide: quirk for LG GH22LP20 DVD burner

LG GH22LP20 DVD burner ("HL)DP-ST@V@-RAI CH22HP20") with firmware 1.00
reports 0x01 ("Sequential-access device") as the peripheral device type
instead of 0x05 ("CD-ROM device").

Reported-by: Thomas Drillich <th@xxxxxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
 drivers/ide/ide-probe.c |    9 +++++++++
 1 file changed, 9 insertions(+)

Index: b/drivers/ide/ide-probe.c
===================================================================
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -106,6 +106,12 @@ static void ide_disk_init_mult_count(ide
 	}
 }
 
+/* LG GH22LP20 DVD burner reports bad peripheral device type */
+static const struct drive_list_entry bad_media_type_list[] = {
+	{ "HL)DP-ST@V@-RAI CH22HP20",	"1.00" },
+	{ NULL,		NULL }
+};
+
 /**
  *	do_identify	-	identify a drive
  *	@drive: drive to identify 
@@ -166,6 +172,9 @@ static inline void do_identify (ide_driv
 	if (cmd == WIN_PIDENTIFY) {
 		u8 type = (id->config >> 8) & 0x1f;
 
+		if (ide_in_drive_list(id, bad_media_type_list))
+			type = ide_cdrom;
+
 		printk(KERN_CONT "ATAPI ");
 		switch (type) {
 			case ide_floppy:
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux