http://bugzilla.kernel.org/show_bug.cgi?id=11659 Summary: CDROM on Laptop Fudjitsu-siemens Amilo Xa-2528 isn't reconized Product: IO/Storage Version: 2.5 KernelVersion: 2.6.26-5 debian amd64 Platform: All OS/Version: Linux Tree: Mainline Status: NEW Severity: high Priority: P1 Component: IDE AssignedTo: io_ide@xxxxxxxxxxxxxxxxxxxx ReportedBy: remy.labene@xxxxxxx Latest working kernel version: no Earliest failing kernel version: 2.6.26 (gcc version 4.3.1 ) Distribution: debian Hardware Environment: X86_64 Software Environment: k8 Problem Description: The IDE driver IDE-Generic or IDE-AMD7xxx don't start the CDROM on Laptop Fudjitsu-siemens Amilo Xa-2528 Steps to reproduce:; It's necessary to install Linux on this laptop to boot with a cdrom netinstall. After install the CD/DVD is see but it don't work. I try differents drivers IDE (Generic_ide and amd7xxx_ide) but the DVD don't work. My distribution is a debian amd64 lenny (testing, stable etch cdrom don't boot correctly). See my dmesg (part), lsmod, lspci, /proc/info... bellow : I will try to build the kernel with SCSI emulation for CDROM Thanks for your help Remy LABENE ------------------------------------------------------------ [ 4.743400] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.811401] ata2.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133 [ 4.811401] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 4.823400] ata2.00: configured for UDMA/133 [ 4.823400] isa bounce pool size: 16 pages [ 4.823400] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 01.0 PQ: 0 ANSI: 5 [ 4.823400] scsi 1:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 01.0 PQ: 0 ANSI: 5 [ 4.823400] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 5.511843] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[c4000000-c40007ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 5.522012] Uniform Multi-Platform E-IDE driver [ 5.522012] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 5.524676] NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller [ 5.524676] NFORCE-MCP51: IDE controller (0x10de:0x0265 rev 0xf1) at PCI slot 0000:00:0d.0 [ 5.524676] NFORCE-MCP51: not 100% native mode: will probe irqs later [ 5.524676] NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround. [ 5.524676] ide0: BM-DMA at 0x3080-0x3087 [ 5.524676] ide1: BM-DMA at 0x3088-0x308f [ 5.524676] Probing IDE interface ide0... [ 5.608668] usb 2-8: configuration #1 chosen from 1 choice [ 5.608668] Driver 'sd' needs updating - please use bus_type methods [ 7.288168] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <---- bloc here at boot [ 37.292293] hda: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest } [ 37.292293] ide: failed opcode was: 0xa1 [ 37.292293] ide1 at 0x170-0x177,0x376 on irq 15 [ 37.329063] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest } [ 37.329204] ide: failed opcode was: unknown [ 37.329264] hda: drive not ready for command [ 37.329297] hda: ATAPI CD-ROM drive, 0kB Cache [ 37.329403] Uniform CD-ROM driver Revision: 3.20 [ 37.329460] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest } [ 37.329595] ide: failed opcode was: unknown [ 37.329652] hda: drive not ready for command [ 37.329702] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest } [ 37.329839] ide: failed opcode was: unknown [ 37.332334] hda: drive not ready for command [ 37.332367] hda: weird block size 0 [ 37.332398] hda: default to 2kb block size [ 37.332448] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest } DataRequest } ----------------------------------------------------------- /proc/modules fujitsu_laptop 7112 0 - Live 0xffffffffa02ea000 rfcomm 37408 2 - Live 0xffffffffa02df000 l2cap 21888 5 rfcomm, Live 0xffffffffa02d8000 ipv6 284728 16 - Live 0xffffffffa0291000 ppdev 9416 0 - Live 0xffffffffa028d000 parport_pc 27928 0 - Live 0xffffffffa0285000 lp 12324 0 - Live 0xffffffffa0280000 parport 39456 3 ppdev,parport_pc,lp, Live 0xffffffffa0275000 video 21780 0 - Live 0xffffffffa026e000 output 5696 1 video, Live 0xffffffffa026b000 powernow_k8 14916 1 - Live 0xffffffffa0266000 cpufreq_powersave 4224 0 - Live 0xffffffffa0263000 cpufreq_stats 6864 0 - Live 0xffffffffa0260000 cpufreq_userspace 6276 0 - Live 0xffffffffa025d000 cpufreq_ondemand 9616 1 - Live 0xffffffffa0259000 cpufreq_conservative 9544 0 - Live 0xffffffffa0255000 freq_table 7168 3 powernow_k8,cpufreq_stats,cpufreq_ondemand, Live 0xffffffffa0252000 loop 17228 0 - Live 0xffffffffa024c000 joydev 12736 0 - Live 0xffffffffa0247000 snd_hda_intel 426188 1 - Live 0xffffffffa01dd000 snd_pcm_oss 38560 0 - Live 0xffffffffa01d2000 snd_mixer_oss 16704 1 snd_pcm_oss, Live 0xffffffffa01cc000 snd_pcm 79240 2 snd_hda_intel,snd_pcm_oss, Live 0xffffffffa01b7000 pcspkr 4864 0 - Live 0xffffffffa01b4000 snd_timer 23760 1 snd_pcm, Live 0xffffffffa01ad000 snd 61304 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer, Live 0xffffffffa019d000 psmouse 40220 0 - Live 0xffffffffa0192000 serio_raw 7812 0 - Live 0xffffffffa018f000 k8temp 7040 0 - Live 0xffffffffa018c000 soundcore 9744 1 snd, Live 0xffffffffa0188000 snd_page_alloc 10960 2 snd_hda_intel,snd_pcm, Live 0xffffffffa0184000 hci_usb 16604 2 - Live 0xffffffffa017e000 bluetooth 53540 7 rfcomm,l2cap,hci_usb, Live 0xffffffffa016f000 i2c_nforce2 8512 0 - Live 0xffffffffa016b000 i2c_core 25440 1 i2c_nforce2, Live 0xffffffffa0163000 battery 14600 0 - Live 0xffffffffa015e000 container 6208 0 - Live 0xffffffffa015b000 ac 7240 0 - Live 0xffffffffa007e000 button 9504 0 - Live 0xffffffffa0157000 evdev 12160 6 - Live 0xffffffffa0153000 reiserfs 210256 2 - Live 0xffffffffa011e000 sd_mod 26928 5 - Live 0xffffffffa0116000 usbhid 43792 0 - Live 0xffffffffa010a000 hid 39584 1 usbhid, Live 0xffffffffa00ff000 ff_memless 7240 1 usbhid, Live 0xffffffffa00fc000 ide_cd_mod 34248 0 - Live 0xffffffffa00f2000 cdrom 36008 1 ide_cd_mod, Live 0xffffffffa00e8000 ohci1394 30260 0 - Live 0xffffffffa00dd000 ieee1394 90984 1 ohci1394, Live 0xffffffffa00c5000 forcedeth 51664 0 - Live 0xffffffffa00b7000 sata_nv 25160 5 - Live 0xffffffffa00af000 libata 164288 1 sata_nv, Live 0xffffffffa0085000 amd74xx 11336 0 [permanent], Live 0xffffffffa0081000 scsi_mod 158232 2 sd_mod,libata, Live 0xffffffffa0056000 dock 11808 1 libata, Live 0xffffffffa0052000 ide_core 127244 2 ide_cd_mod,amd74xx, Live 0xffffffffa002f000 ohci_hcd 22724 0 - Live 0xffffffffa0026000 ehci_hcd 34764 0 - Live 0xffffffffa001a000 thermal 20512 0 - Live 0xffffffffa0013000 processor 40512 2 powernow_k8,thermal, Live 0xffffffffa0008000 fan 7176 0 - Live 0xffffffffa0005000 thermal_sys 15424 4 video,thermal,processor,fan, Live 0xffffffffa0000000 --------------------------------------------------------------------------- /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-0060 : keyboard 0064-0064 : keyboard 0070-0071 : rtc0 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : 0000:00:0d.0 0170-0177 : NFORCE-MCP51 01f0-01f7 : 0000:00:0d.0 01f0-01f7 : NFORCE-MCP51 0360-0361 : pnp 00:0b 0376-0376 : 0000:00:0d.0 0376-0376 : NFORCE-MCP51 03c0-03df : vga+ 03f6-03f6 : 0000:00:0d.0 03f6-03f6 : NFORCE-MCP51 04d0-04d1 : pnp 00:0b 0cf8-0cff : PCI conf1 1000-107f : pnp 00:03 1000-1003 : ACPI PM1a_EVT_BLK 1004-1005 : ACPI PM1a_CNT_BLK 1008-100b : ACPI PM_TMR 1010-1015 : ACPI CPU throttle 1020-1027 : ACPI GPE0_BLK 1080-10ff : pnp 00:03 1400-147f : pnp 00:03 1480-14ff : pnp 00:03 1484-1484 : ACPI PM2_CNT_BLK 1800-187f : pnp 00:03 1880-18ff : pnp 00:03 3000-303f : 0000:00:0a.1 3000-303f : nForce2_smbus 3040-307f : 0000:00:0a.1 3040-307f : nForce2_smbus 3080-308f : 0000:00:0d.0 3080-308f : NFORCE-MCP51 3090-309f : 0000:00:0e.0 3090-309f : sata_nv 30a0-30a3 : 0000:00:0e.0 30a0-30a3 : sata_nv 30a4-30a7 : 0000:00:0e.0 30a4-30a7 : sata_nv 30a8-30af : 0000:00:0e.0 30a8-30af : sata_nv 30b0-30b7 : 0000:00:0e.0 30b0-30b7 : sata_nv 30b8-30bf : 0000:00:14.0 30b8-30bf : forcedeth 4000-4fff : PCI Bus 0000:01 5000-5fff : PCI Bus 0000:05 5000-507f : 0000:05:00.0 6000-6fff : PCI Bus 0000:07 6000-607f : 0000:07:06.0 --------------------------------------------------------------------------- /proc/iomem 00000000-0009dbff : System RAM 0009dc00-0009ffff : reserved 000ce000-000fffff : reserved 00100000-7ff5ffff : System RAM 00200000-00435b60 : Kernel code 00435b61-0053f167 : Kernel data 005e3000-00676df7 : Kernel bss 7ff60000-7ff69fff : ACPI Tables 7ff6a000-7ff7ffff : ACPI Non-volatile Storage 7ff80000-7fffffff : reserved c0000000-c0003fff : 0000:00:10.1 c0000000-c0003fff : ICH HD audio c0004000-c0004fff : 0000:00:0b.0 c0004000-c0004fff : ohci_hcd c0005000-c00050ff : 0000:00:0b.1 c0005000-c00050ff : ehci_hcd c0006000-c0006fff : 0000:00:0e.0 c0006000-c0006fff : sata_nv c0007000-c0007fff : 0000:00:14.0 c0007000-c0007fff : forcedeth c0040000-c007ffff : 0000:00:0a.3 c0200000-c03fffff : PCI Bus 0000:01 c1000000-c3ffffff : PCI Bus 0000:05 c1000000-c1ffffff : 0000:05:00.0 c2000000-c3ffffff : 0000:05:00.0 c4000000-c40fffff : PCI Bus 0000:07 c4000000-c40007ff : 0000:07:06.0 c4000000-c40007ff : ohci1394 c4200000-c43fffff : PCI Bus 0000:01 d0000000-dfffffff : PCI Bus 0000:05 d0000000-dfffffff : 0000:05:00.0 e0000000-efffffff : reserved e0000000-e06fffff : PCI MMCONFIG 0 fec00000-fec0ffff : reserved fec00000-fec00fff : IOAPIC 0 fed00000-fed00fff : pnp 00:00 fed00000-fed003ff : HPET 0 fee00000-fee00fff : Local APIC fee00000-fee00fff : reserved fff80000-ffffffff : reserved -------------------------------------------------------------- lspci -vvvv : 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL- Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=3 IsocEn- LSEn+ ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config 1: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03 Link Frequency 0: 800MHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 800MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000 00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2) Subsystem: Fujitsu Siemens Computers Device 110c Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2) Subsystem: Fujitsu Siemens Computers Device 110c Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2) Subsystem: Fujitsu Siemens Computers Device 110c Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2) Subsystem: Fujitsu Siemens Computers Device 110c Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) Subsystem: Fujitsu Siemens Computers Device 110c Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [44] #00 [00fe] Capabilities: [fc] #00 [0000] 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2) Subsystem: Fujitsu Siemens Computers Device 110c Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2) Subsystem: Fujitsu Siemens Computers Device 110c Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: c0200000-c03fffff Prefetchable memory behind bridge: 00000000c4200000-00000000c43fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Device 0000 Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0300c Data: 4149 Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+ Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Device 0000 Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0300c Data: 4151 Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+ Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: c1000000-c3ffffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Device 0000 Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0300c Data: 4159 Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2) Subsystem: Fujitsu Siemens Computers Device 110c Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Command: BaseUnitID=9 UnitCnt=15 MastHost- DefDir- DUL- Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03 Link Frequency 0: 800MHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3) Subsystem: nVidia Corporation Device cb84 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3) Subsystem: Fujitsu Siemens Computers Device 110c Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 10 Region 4: I/O ports at 3040 [size=64] Region 5: I/O ports at 3000 [size=64] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3) Subsystem: Fujitsu Siemens Computers Device 110c Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 10 Region 0: Memory at c0040000 (32-bit, non-prefetchable) [size=256K] 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 10) Subsystem: nVidia Corporation Device cb84 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 22 Region 0: Memory at c0004000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 20) Subsystem: nVidia Corporation Device cb84 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 23 Region 0: Memory at c0005000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev f1) (prog-if 8a [Master SecP PriP]) Subsystem: Fujitsu Siemens Computers Device 110c Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at 3080 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: AMD_IDE Kernel modules: amd74xx 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev f1) (prog-if 85 [Master SecO PriO]) Subsystem: Fujitsu Siemens Computers Device 110c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at 30b0 [size=8] Region 1: I/O ports at 30a4 [size=4] Region 2: I/O ports at 30a8 [size=8] Region 3: I/O ports at 30a0 [size=4] Region 4: I/O ports at 3090 [size=16] Region 5: Memory at c0006000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: sata_nv Kernel modules: sata_nv 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=64 I/O behind bridge: 00006000-00006fff Memory behind bridge: c4000000-c40fffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: [b8] Subsystem: nVidia Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) Subsystem: Fujitsu Siemens Computers Device 110c Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin B routed to IRQ 19 Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3) Subsystem: Fujitsu Siemens Computers Device 110c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 30b8 [size=8] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=0 PME- Kernel driver in use: forcedeth Kernel modules: forcedeth 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=8 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 05:00.0 VGA compatible controller: nVidia Corporation GeForce 8600M GS (rev a1) Subsystem: Fujitsu Siemens Computers Device 110c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at c1000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at c2000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at 5000 [size=128] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Virtual Channel <?> Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information <?> Kernel modules: nvidiafb 07:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev c0) (prog-if 10) Subsystem: Fujitsu Siemens Computers Device 110c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at c4000000 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at 6000 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci1394 Kernel modules: ohci1394 --------------------------------------------------------------------------- /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD2500BEVS-2 Rev: 01.0 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD2500BEVS-2 Rev: 01.0 Type: Direct-Access ANSI SCSI revision: 05 --------------------------------------------------------------------------- -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee. -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html