Hi,
Any idea about this ?
I have seen it also on ubuntu and arch lists...
On Mon, 15 Sep 2008 10:09:09 +0200, "J.A. Magallón" <jamagallon@xxxxxxx> wrote:
> Hi all...
>
> Since some days ago I have notcied my 64bit cooker box was too slow,
> for example, to perform an urpmi update.
> Looking at dmesg/syslog, I have seen an strange message:
>
> ata4: EH pending after 5 tries, giving up
> ata4: EH complete
> ata3: EH pending after 5 tries, giving up
> ata3: EH complete
> ata2: EH complete
> ata4: EH pending after 5 tries, giving up
> ata4: EH complete
> ata3: EH pending after 5 tries, giving up
> ata3: EH complete
>
> It repeats continuously. But there is nothing attached to ata > 1.
> It looks like a bug in sata_nv, it keeps polling non present devices or
> something like that.
> Kernel is kernel-desktop-2.6.27-0.rc6.1mnb-1-1mnb2 (the mandriva kernel, but
> if this is not a know bug I can try a plain rc6 kernel).
> Some info comes below.
>
> Any ideas ? Known bug in mainline ?
>
> cicely:/var/log# lspci
> 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
> 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
> 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
> 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
> 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
> 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
> 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
> 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
> 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
> 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
> 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
> 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
> 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
> 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
> 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
> 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
> 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
> 01:00.0 VGA compatible controller: nVidia Corporation G80 [GeForce 8800 GTX] (rev a2)
> 80:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
> 80:01.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
> 80:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
> 80:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
> 80:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
> 80:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
> 80:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
>
> cicely:/var/log# lsscsi
> [0:0:0:0] disk ATA MAXTOR STM332062 3.AA /dev/sda
> [9:0:0:0] cd/dvd PIONEER DVD-RW DVR-112D 1.21 /dev/sr0
>
> dmesg on boot:
>
> libata version 3.00 loaded.
> sata_nv 0000:00:07.0: version 3.5
> ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
> sata_nv 0000:00:07.0: PCI INT A -> Link[LTID] -> GSI 22 (level, low) -> IRQ 22
> sata_nv 0000:00:07.0: setting latency timer to 64
> scsi0 : sata_nv
> scsi1 : sata_nv
> ata1: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 22
> ata2: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 22
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ATA-7: MAXTOR STM3320620AS, 3.AAE, max UDMA/133
> ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
> ata1.00: configured for UDMA/133
> input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
> scsi 0:0:0:0: Direct-Access ATA MAXTOR STM332062 3.AA PQ: 0 ANSI: 5
> ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 21
> sata_nv 0000:00:08.0: PCI INT A -> Link[LTIE] -> GSI 21 (level, low) -> IRQ 21
> sata_nv 0000:00:08.0: setting latency timer to 64
> scsi2 : sata_nv
> scsi3 : sata_nv
> ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb000 bmdma 0xa400 irq 21
> ata4: SATA max UDMA/133 cmd 0xac00 ctl 0xa800 bmdma 0xa408 irq 21
> ACPI: PCI Interrupt Link [LT3D] enabled at IRQ 47
> sata_nv 0000:80:07.0: PCI INT A -> Link[LT3D] -> GSI 47 (level, low) -> IRQ 47
> sata_nv 0000:80:07.0: setting latency timer to 64
> scsi4 : sata_nv
> scsi5 : sata_nv
> ata5: SATA max UDMA/133 cmd 0xf800 ctl 0xf400 bmdma 0xe800 irq 47
> ata6: SATA max UDMA/133 cmd 0xf000 ctl 0xec00 bmdma 0xe808 irq 47
> ACPI: PCI Interrupt Link [LT2E] enabled at IRQ 46
> sata_nv 0000:80:08.0: PCI INT A -> Link[LT2E] -> GSI 46 (level, low) -> IRQ 46
> sata_nv 0000:80:08.0: setting latency timer to 64
> scsi6 : sata_nv
> scsi7 : sata_nv
> ata7: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xd400 irq 46
> ata8: SATA max UDMA/133 cmd 0xdc00 ctl 0xd800 bmdma 0xd408 irq 46
> pata_amd 0000:00:06.0: version 0.3.10
> pata_amd 0000:00:06.0: setting latency timer to 64
> scsi8 : pata_amd
> scsi9 : pata_amd
> ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3000 irq 14
> ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3008 irq 15
> ata10.00: ATAPI: PIONEER DVD-RW DVR-112D, 1.21, max UDMA/66
> ata10: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc500) ACPI=0x1f
> ata10.00: configured for UDMA/66
> scsi 9:0:0:0: CD-ROM PIONEER DVD-RW DVR-112D 1.21 PQ: 0 ANSI: 5
> Driver 'sd' needs updating - please use bus_type methods
> sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
> sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
> sda: sda1 sda2 sda3
> sd 0:0:0:0: [sda] Attached SCSI disk
>
--
J.A. Magallon <jamagallon()ono!com> \ Software is like sex:
\ It's better when it's free
Mandriva Linux release 2009.0 (Cooker) for i586
Linux 2.6.25-jam18 (gcc 4.3.1 20080626 (GCC) #1 SMP
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
