Add a helper routine to register tx4939ide driver and use it on RBTX4939 board. Signed-off-by: Atsushi Nemoto <anemo@xxxxxxxxxxxxx> --- This patch is against linux-next 20080916. Changes since v1: * Use static resource arrays and platform_device array. arch/mips/txx9/generic/setup_tx4939.c | 46 +++++++++++++++++++++++++++++++++ arch/mips/txx9/rbtx4939/setup.c | 1 + include/asm-mips/txx9/tx4939.h | 1 + 3 files changed, 48 insertions(+), 0 deletions(-) diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c index f14a497..6c0049a 100644 --- a/arch/mips/txx9/generic/setup_tx4939.c +++ b/arch/mips/txx9/generic/setup_tx4939.c @@ -20,6 +20,7 @@ #include <linux/param.h> #include <linux/ptrace.h> #include <linux/mtd/physmap.h> +#include <linux/platform_device.h> #include <asm/bootinfo.h> #include <asm/reboot.h> #include <asm/traps.h> @@ -389,6 +390,51 @@ void __init tx4939_mtd_init(int ch) txx9_physmap_flash_init(ch, start, size, &pdata); } +#define TX4939_ATA_REG_PHYS(ch) (TX4939_ATA_REG(ch) & 0xfffffffffULL) +void __init tx4939_ata_init(void) +{ + static struct resource ata0_res[] = { + { + .start = TX4939_ATA_REG_PHYS(0), + .end = TX4939_ATA_REG_PHYS(0) + 0x1000 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = TXX9_IRQ_BASE + TX4939_IR_ATA(0), + .flags = IORESOURCE_IRQ, + }, + }; + static struct resource ata1_res[] = { + { + .start = TX4939_ATA_REG_PHYS(1), + .end = TX4939_ATA_REG_PHYS(1) + 0x1000 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = TXX9_IRQ_BASE + TX4939_IR_ATA(1), + .flags = IORESOURCE_IRQ, + }, + }; + static struct platform_device ata0_dev = { + .name = "tx4939ide", + .id = 0, + .num_resources = ARRAY_SIZE(ata0_res), + .resource = ata0_res, + }; + static struct platform_device ata1_dev = { + .name = "tx4939ide", + .id = 1, + .num_resources = ARRAY_SIZE(ata1_res), + .resource = ata1_res, + }; + __u64 pcfg = __raw_readq(&tx4939_ccfgptr->pcfg); + + if (pcfg & TX4939_PCFG_ATA0MODE) + platform_device_register(&ata0_dev); + if ((pcfg & (TX4939_PCFG_ATA1MODE | + TX4939_PCFG_ET1MODE | + TX4939_PCFG_ET0MODE)) == TX4939_PCFG_ATA1MODE) + platform_device_register(&ata1_dev); +} + static void __init tx4939_stop_unused_modules(void) { __u64 pcfg, rst = 0, ckd = 0; diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c index 277864d..9855d7b 100644 --- a/arch/mips/txx9/rbtx4939/setup.c +++ b/arch/mips/txx9/rbtx4939/setup.c @@ -264,6 +264,7 @@ static void __init rbtx4939_device_init(void) #endif rbtx4939_led_setup(); tx4939_wdt_init(); + tx4939_ata_init(); } static void __init rbtx4939_setup(void) diff --git a/include/asm-mips/txx9/tx4939.h b/include/asm-mips/txx9/tx4939.h index 7ce2dff..88badb4 100644 --- a/include/asm-mips/txx9/tx4939.h +++ b/include/asm-mips/txx9/tx4939.h @@ -540,5 +540,6 @@ void tx4939_setup_pcierr_irq(void); void tx4939_irq_init(void); int tx4939_irq(void); void tx4939_mtd_init(int ch); +void tx4939_ata_init(void); #endif /* __ASM_TXX9_TX4939_H */ -- 1.5.6.3 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html