Having a bit of difficulty with the following:
2.6.27-rc1
pata_pdc2027x.ko
MPC8347
Promise pdc20275
The following console output is produced when I try to load pata_pdc2027x.
Each attempt takes several tens of seconds to fail. Loading the module
takes 2 to 3 minutes.
Once the module has been loaded, mounting SDA1 takes about 20 seconds,
but can be accessed successfully (albeit slowly)
Having throttled back to PIO4, it seems to work - but does anyone have
any ideas why the exceptions in all UDMA modes?
pata_pdc2027x 0000:00:0b.0: version 1.0
pata_pdc2027x 0000:00:0b.0: PLL input clock 16485 kHz
scsi0 : pata_pdc2027x
scsi1 : pata_pdc2027x
ata1: PATA max UDMA/133 mmio m16384@0xc0100000 cmd 0xc01017c0 irq 16
ata2: PATA max UDMA/133 mmio m16384@0xc0100000 cmd 0xc01015c0 irq 16
ata1.00: CFA: LEXAR ATA FLASH CARD, 20070228, max UDMA/100
ata1.00: 7831152 sectors, multi 0: LBA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA LEXAR ATA FLASH 2007 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 7831152 512-byte hardware sectors (4010 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 7831152 512-byte hardware sectors (4010 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
sda:<3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: limiting speed to UDMA/66:PIO4
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for UDMA/66
ata1: EH complete
ata1.00: limiting speed to UDMA/33:PIO4
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: limiting speed to PIO4
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for PIO4
ata1: EH complete
sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
