Enabling blink mode makes the SATA active LED more human visible.
Signed-off-by: Saeed Bishara <saeed@xxxxxxxxxxx>
---
drivers/ata/sata_mv.c | 10 +++++++++-
1 files changed, 9 insertions(+), 1 deletions(-)
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 13c1d2a..302e1f8 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -208,6 +208,10 @@ enum {
DMA_IRQ = (1 << 0), /* shift by port # */
HC_COAL_IRQ = (1 << 4), /* IRQ coalescing */
DEV_IRQ = (1 << 8), /* shift by port # */
+ SOC_LED_CTRL_OFS = 0x2c,
+ SOC_LED_CTRL_BLINK = (1 << 0), /* Active LED blink */
+ SOC_LED_CTRL_ACT_PRESENCE = (1 << 2), /* Multiplex presence with */
+ /* the active LED */
/* Shadow block registers */
SHD_BLK_OFS = 0x100,
@@ -2616,7 +2620,11 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
static void mv_soc_enable_leds(struct mv_host_priv *hpriv,
void __iomem *mmio)
{
- return;
+ void __iomem *hc_mmio = mv_hc_base(mmio, 0);
+ u32 tmp = readl(hc_mmio + SOC_LED_CTRL_OFS);
+
+ /* enable blinking mode */
+ writel(tmp | SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL_OFS);
}
static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx,
--
1.5.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
