Hello. Masoud Sharbiani "مسعود شربیانی" wrote:
Hi there, Looks like your commit 74811f355f4f69a187fa74892dcf2a684b84ce99 (hpt366: convert to use ->host_priv)
Thanks for the bisection.
has caused the following crash:
Oops, we did it again. :-)
(Full dmesg follows, as captured from a serial console)
[ 22.555200] hpt366: HPT374 chipset detected [ 22.559489] hpt366 0000:03:06.0: IDE controller (0x1103:0x0008 rev 0x07) [ 22.566278] HPT366_IDE 0000:03:06.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 22.573729] usb 1-2: new full speed USB device using uhci_hcd and address 4 [ 22.580726] pci 0000:03:06.1: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 22.587529] hpt366 0000:03:06.0: DPLL base: 48 MHz, f_CNT: 142, assuming 33 MHz PCI [ 22.602705] hpt366 0000:03:06.0: using 50 MHz DPLL clock [ 22.608181] hpt366 0000:03:06.0: 100% native mode on irq 28 [ 22.613831] hpt366 0000:03:06.1: no clock data saved by BIOS
Aha, HPT374 workaround for reading BIOS clock data didn't get executed.
[ 22.731015] usb 1-2: configuration #1 chosen from 1 choice [ 22.737191] ata2.00: ATA-6: ST3120022A, 3.04, max UDMA/100 [ 22.738880] hub 1-2:1.0: USB hub found [ 22.746597] ata2.00: 234441648 sectors, multi 16: LBA48 [ 22.747804] hpt366 0000:03:06.1: DPLL base: 33 MHz, f_CNT: 139, assuming
Uh, I wonder where did it get those 33 MHz DPLL base -- there's simply no such base. Looks like memory addressed by .host_priv got corrupt...
MBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
