On Wed, Sep 3, 2008 at 5:01 PM, Tejun Heo <tj@xxxxxxxxxx> wrote:
> Jason Davis wrote:
>> Hello,
>> I'm trying to confirm hot/warm plugging is working on my system. When
>> I plug in the drive shows up as expected. I just want to make sure the
>> stuff I see in the logs is ok.
>
> Yeah, those are as okay as they get. :-)
Hi Tejun,
Can you check these too (I'm testing hotplug on the PDC42819 with ahci driver)?
after powering up eSATA connected drive:
ata7: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen
ata7: irq_stat 0x00000040, connection status changed
ata7: SError: { PHYRdyChg CommWake DevExch }
ata7: hard resetting link
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: ATA-7: HTS721060G9SA00, MC3IC10H, max UDMA/100
ata7.00: 117210240 sectors, multi 0: LBA48
ata7.00: configured for UDMA/100
ata7: EH complete
scsi 6:0:0:0: Direct-Access ATA HTS721060G9SA00 MC3I PQ: 0 ANSI: 5
sd 6:0:0:0: [sdb] 117210240 512-byte hardware sectors (60012 MB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 6:0:0:0: [sdb] 117210240 512-byte hardware sectors (60012 MB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI disk
sd 6:0:0:0: Attached scsi generic sg1 type 0
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
after unmounting and executing
echo 1 > /sys/class/scsi_device/6\:0\:0\:0/device/delete:
sd 6:0:0:0: [sdb] Synchronizing SCSI cache
sd 6:0:0:0: [sdb] Stopping disk
ata7.00: disabled
and after removing power from eSATA device:
ata7: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xe frozen
ata7: irq_stat 0x00400000, PHY RDY changed
ata7: SError: { PHYRdyChg }
ata7: hard resetting link
ata7: SATA link down (SStatus 0 SControl 300)
ata7: EH complete
Thanks!
Mark
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
