Hi,
I have an AHCI capable chipset now (ICH10), so I tried ALPM[*], by
echo-ing min_power to:
./class/scsi_host/host0/link_power_management_policy
./class/scsi_host/host5/link_power_management_policy
The 6 SATA2 drives have 3 partitions each, partition 1 is RAID1,
partition 3 is RAID10.
This soon caused me troubles, as the kernel gave I/O error messages, and
unmounted my filesystems running
on /dev/md4 (raid10 array). Unfortunately I don't have those messages
saved to my logs, because my /var filesystem got automatically unmounted.
I had no choice but to reboot, and then md kicked 4 drives out of the
md4 array (6 total drives), and then refused
to assemble (too few drives). The RAID1 array (md3) got reassembled, and
resynced successfully.
I had to force the assembly of /dev/md4 [and encountered a mdadm bug
while doing so: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=496334]
I think ALPM should refuse to set link pm if the device is part of a
raid array, or the md driver should be aware
of ALPM, and wait a little longer for the device to come back online.
Mentioning this problem somewhere in the sources/docs would be nice.
System info:
Linux debian 2.6.26-1-amd64 #1 SMP Wed Aug 20 12:09:32 UTC 2008 x86_64
GNU/Linux
0:00.0 Host bridge: Intel Corporation Eaglelake DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation Eaglelake PCI Express Root Port
(rev 02)
00:1a.0 USB Controller: Intel Corporation ICH10 USB UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation ICH10 USB UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation ICH10 USB UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation ICH10 USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation ICH10 HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation ICH10 PCI Express Port 1
00:1c.2 PCI bridge: Intel Corporation ICH10 PCI Express Port 3
00:1c.3 PCI bridge: Intel Corporation ICH10 PCI Express Port 4
00:1c.4 PCI bridge: Intel Corporation ICH10 PCI Express Port 5
00:1c.5 PCI bridge: Intel Corporation ICH10 PCI Express Port 6
00:1d.0 USB Controller: Intel Corporation ICH10 USB UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation ICH10 USB UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation ICH10 USB UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation ICH10 USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation ICH10 LPC Interface Controller
00:1f.2 SATA controller: Intel Corporation ICH10 6 port SATA AHCI Controller
00:1f.3 SMBus: Intel Corporation ICH10 SMBus Controller
01:00.0 VGA compatible controller: nVidia Corporation NV44 [GeForce 6200
TurboCache(TM)] (rev a1)
03:00.0 RAID bus controller: Silicon Image, Inc. SiI 3132 Serial ATA
Raid II Controller (rev 01)
04:00.0 IDE interface: JMicron Technologies, Inc. JMB368 IDE controller
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
07:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link)
[*]: this is a desktop, not a laptop system, but I have 6 disks, so I
thought to try some power-management tweaks.
I should have known better not to do that on a raid device!
Best regards,
--Edwin
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
