Set IDE_AFLAG_DRQ_INTERRUPT in do_identify() instead of ATAPI
device drivers *_setup() methods.
While at it:
- use ata_id_cdb_intr()
There should be no functional changes caused by this patch.
Cc: Borislav Petkov <petkovbb@xxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ide/ide-cd.c | 3 ---
drivers/ide/ide-floppy.c | 5 -----
drivers/ide/ide-probe.c | 2 ++
drivers/ide/ide-tape.c | 7 -------
drivers/scsi/ide-scsi.c | 2 --
5 files changed, 2 insertions(+), 17 deletions(-)
Index: b/drivers/ide/ide-cd.c
===================================================================
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1887,9 +1887,6 @@ static int ide_cdrom_setup(ide_drive_t *
drive->atapi_flags = IDE_AFLAG_MEDIA_CHANGED | IDE_AFLAG_NO_EJECT |
ide_cd_flags(id);
- if ((id[ATA_ID_CONFIG] & 0x0060) == 0x20)
- drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
-
if ((drive->atapi_flags & IDE_AFLAG_VERTOS_300_SSD) &&
fw_rev[4] == '1' && fw_rev[6] <= '2')
drive->atapi_flags |= (IDE_AFLAG_TOCTRACKS_AS_BCD |
Index: b/drivers/ide/ide-floppy.c
===================================================================
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -578,16 +578,11 @@ static const struct ide_proc_devset idef
static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
{
u16 *id = drive->id;
- u8 gcw[2];
-
- *((u16 *)&gcw) = id[ATA_ID_CONFIG];
drive->pc_callback = ide_floppy_callback;
drive->pc_update_buffers = idefloppy_update_buffers;
drive->pc_io_buffers = ide_io_buffers;
- if (((gcw[0] & 0x60) >> 5) == 1)
- drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
/*
* We used to check revisions here. At this point however I'm giving up.
* Just assume they are all broken, its easier.
Index: b/drivers/ide/ide-probe.c
===================================================================
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -206,6 +206,8 @@ static inline void do_identify (ide_driv
drive->media = type;
/* an ATAPI device ignores DRDY */
drive->ready_stat = 0;
+ if (ata_id_cdb_intr(id))
+ drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
return;
}
Index: b/drivers/ide/ide-tape.c
===================================================================
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -2184,7 +2184,6 @@ static void idetape_setup(ide_drive_t *d
unsigned long t;
int speed;
int buffer_size;
- u8 gcw[2];
u16 *ctl = (u16 *)&tape->caps[12];
drive->pc_callback = ide_tape_callback;
@@ -2211,12 +2210,6 @@ static void idetape_setup(ide_drive_t *d
tape->name[2] = '0' + minor;
tape->chrdev_dir = IDETAPE_DIR_NONE;
- *((u16 *)&gcw) = drive->id[ATA_ID_CONFIG];
-
- /* Command packet DRQ type */
- if (((gcw[0] & 0x60) >> 5) == 1)
- set_bit(IDE_AFLAG_DRQ_INTERRUPT, &drive->atapi_flags);
-
idetape_get_inquiry_results(drive);
idetape_get_mode_sense_results(drive);
ide_tape_get_bsize_from_bdesc(drive);
Index: b/drivers/scsi/ide-scsi.c
===================================================================
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -385,8 +385,6 @@ static const struct ide_proc_devset ides
*/
static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi)
{
- if ((drive->id[ATA_ID_CONFIG] & 0x0060) == 0x20)
- set_bit(IDE_AFLAG_DRQ_INTERRUPT, &drive->atapi_flags);
clear_bit(IDESCSI_SG_TRANSFORM, &scsi->transform);
#if IDESCSI_DEBUG_LOG
set_bit(IDESCSI_LOG_CMD, &scsi->log);
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
