Now that libata has slave_link, there's no need to keep ugly merged
SCR access. Drop it and use slave_link instead. This results in
simpler code and much better separate link handling for master and
slave.
Signed-off-by: Tejun Heo <tj@xxxxxxxxxx>
---
drivers/ata/ata_piix.c | 167 ++++++++++++------------------------------------
1 files changed, 40 insertions(+), 127 deletions(-)
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 375cdc7..4de4074 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -878,23 +878,9 @@ static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev)
* Serial ATA Index/Data Pair Superset Registers access
*
* Beginning from ICH8, there's a sane way to access SCRs using index
- * and data register pair located at BAR5. This creates an
- * interesting problem of mapping two SCRs to one port.
- *
- * Although they have separate SCRs, the master and slave aren't
- * independent enough to be treated as separate links - e.g. softreset
- * resets both. Also, there's no protocol defined for hard resetting
- * singled device sharing the virtual port (no defined way to acquire
- * device signature). This is worked around by merging the SCR values
- * into one sensible value and requesting follow-up SRST after
- * hardreset.
- *
- * SCR merging is perfomed in nibbles which is the unit contents in
- * SCRs are organized. If two values are equal, the value is used.
- * When they differ, merge table which lists precedence of possible
- * values is consulted and the first match or the last entry when
- * nothing matches is used. When there's no merge table for the
- * specific nibble, value from the first port is used.
+ * and data register pair located at BAR5 which means that we have
+ * separate SCRs for master and slave. This is handled using libata
+ * slave_link facility.
*/
static const int piix_sidx_map[] = {
[SCR_STATUS] = 0,
@@ -902,125 +888,38 @@ static const int piix_sidx_map[] = {
[SCR_CONTROL] = 1,
};
-static void piix_sidpr_sel(struct ata_device *dev, unsigned int reg)
+static void piix_sidpr_sel(struct ata_link *link, unsigned int reg)
{
- struct ata_port *ap = dev->link->ap;
+ struct ata_port *ap = link->ap;
struct piix_host_priv *hpriv = ap->host->private_data;
- iowrite32(((ap->port_no * 2 + dev->devno) << 8) | piix_sidx_map[reg],
+ iowrite32(((ap->port_no * 2 + link->pmp) << 8) | piix_sidx_map[reg],
hpriv->sidpr + PIIX_SIDPR_IDX);
}
-static int piix_sidpr_read(struct ata_device *dev, unsigned int reg)
-{
- struct piix_host_priv *hpriv = dev->link->ap->host->private_data;
-
- piix_sidpr_sel(dev, reg);
- return ioread32(hpriv->sidpr + PIIX_SIDPR_DATA);
-}
-
-static void piix_sidpr_write(struct ata_device *dev, unsigned int reg, u32 val)
-{
- struct piix_host_priv *hpriv = dev->link->ap->host->private_data;
-
- piix_sidpr_sel(dev, reg);
- iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA);
-}
-
-static u32 piix_merge_scr(u32 val0, u32 val1, const int * const *merge_tbl)
-{
- u32 val = 0;
- int i, mi;
-
- for (i = 0, mi = 0; i < 32 / 4; i++) {
- u8 c0 = (val0 >> (i * 4)) & 0xf;
- u8 c1 = (val1 >> (i * 4)) & 0xf;
- u8 merged = c0;
- const int *cur;
-
- /* if no merge preference, assume the first value */
- cur = merge_tbl[mi];
- if (!cur)
- goto done;
- mi++;
-
- /* if two values equal, use it */
- if (c0 == c1)
- goto done;
-
- /* choose the first match or the last from the merge table */
- while (*cur != -1) {
- if (c0 == *cur || c1 == *cur)
- break;
- cur++;
- }
- if (*cur == -1)
- cur--;
- merged = *cur;
- done:
- val |= merged << (i * 4);
- }
-
- return val;
-}
-
static int piix_sidpr_scr_read(struct ata_link *link,
unsigned int reg, u32 *val)
{
- struct ata_port *ap = link->ap;
- const int * const sstatus_merge_tbl[] = {
- /* DET */ (const int []){ 1, 3, 0, 4, 3, -1 },
- /* SPD */ (const int []){ 2, 1, 0, -1 },
- /* IPM */ (const int []){ 6, 2, 1, 0, -1 },
- NULL,
- };
- const int * const scontrol_merge_tbl[] = {
- /* DET */ (const int []){ 1, 0, 4, 0, -1 },
- /* SPD */ (const int []){ 0, 2, 1, 0, -1 },
- /* IPM */ (const int []){ 0, 1, 2, 3, 0, -1 },
- NULL,
- };
- u32 v0, v1;
+ struct piix_host_priv *hpriv = link->ap->host->private_data;
if (reg >= ARRAY_SIZE(piix_sidx_map))
return -EINVAL;
- if (!(ap->flags & ATA_FLAG_SLAVE_POSS)) {
- *val = piix_sidpr_read(&ap->link.device[0], reg);
- return 0;
- }
-
- v0 = piix_sidpr_read(&ap->link.device[0], reg);
- v1 = piix_sidpr_read(&ap->link.device[1], reg);
-
- switch (reg) {
- case SCR_STATUS:
- *val = piix_merge_scr(v0, v1, sstatus_merge_tbl);
- break;
- case SCR_ERROR:
- *val = v0 | v1;
- break;
- case SCR_CONTROL:
- *val = piix_merge_scr(v0, v1, scontrol_merge_tbl);
- break;
- }
-
+ piix_sidpr_sel(link, reg);
+ *val = ioread32(hpriv->sidpr + PIIX_SIDPR_DATA);
return 0;
}
static int piix_sidpr_scr_write(struct ata_link *link,
unsigned int reg, u32 val)
{
- struct ata_port *ap = link->ap;
+ struct piix_host_priv *hpriv = link->ap->host->private_data;
if (reg >= ARRAY_SIZE(piix_sidx_map))
return -EINVAL;
- piix_sidpr_write(&ap->link.device[0], reg, val);
-
- if (ap->flags & ATA_FLAG_SLAVE_POSS)
- piix_sidpr_write(&ap->link.device[1], reg, val);
-
+ piix_sidpr_sel(link, reg);
+ iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA);
return 0;
}
@@ -1361,28 +1260,28 @@ static const int *__devinit piix_init_sata_map(struct pci_dev *pdev,
return map;
}
-static void __devinit piix_init_sidpr(struct ata_host *host)
+static int __devinit piix_init_sidpr(struct ata_host *host)
{
struct pci_dev *pdev = to_pci_dev(host->dev);
struct piix_host_priv *hpriv = host->private_data;
- struct ata_device *dev0 = &host->ports[0]->link.device[0];
+ struct ata_link *link0 = &host->ports[0]->link;
u32 scontrol;
- int i;
+ int i, rc;
/* check for availability */
for (i = 0; i < 4; i++)
if (hpriv->map[i] == IDE)
- return;
+ return 0;
if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR))
- return;
+ return 0;
if (pci_resource_start(pdev, PIIX_SIDPR_BAR) == 0 ||
pci_resource_len(pdev, PIIX_SIDPR_BAR) != PIIX_SIDPR_LEN)
- return;
+ return 0;
if (pcim_iomap_regions(pdev, 1 << PIIX_SIDPR_BAR, DRV_NAME))
- return;
+ return 0;
hpriv->sidpr = pcim_iomap_table(pdev)[PIIX_SIDPR_BAR];
@@ -1390,7 +1289,7 @@ static void __devinit piix_init_sidpr(struct ata_host *host)
* Give it a test drive by inhibiting power save modes which
* we'll do anyway.
*/
- scontrol = piix_sidpr_read(dev0, SCR_CONTROL);
+ piix_sidpr_scr_read(link0, SCR_CONTROL, &scontrol);
/* if IPM is already 3, SCR access is probably working. Don't
* un-inhibit power save modes as BIOS might have inhibited
@@ -1398,18 +1297,30 @@ static void __devinit piix_init_sidpr(struct ata_host *host)
*/
if ((scontrol & 0xf00) != 0x300) {
scontrol |= 0x300;
- piix_sidpr_write(dev0, SCR_CONTROL, scontrol);
- scontrol = piix_sidpr_read(dev0, SCR_CONTROL);
+ piix_sidpr_scr_write(link0, SCR_CONTROL, scontrol);
+ piix_sidpr_scr_read(link0, SCR_CONTROL, &scontrol);
if ((scontrol & 0xf00) != 0x300) {
dev_printk(KERN_INFO, host->dev, "SCR access via "
"SIDPR is available but doesn't work\n");
- return;
+ return 0;
}
}
- host->ports[0]->ops = &piix_sidpr_sata_ops;
- host->ports[1]->ops = &piix_sidpr_sata_ops;
+ /* okay, SCRs available, set ops and ask libata for slave_link */
+ for (i = 0; i < 2; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ ap->ops = &piix_sidpr_sata_ops;
+
+ if (ap->flags & ATA_FLAG_SLAVE_POSS) {
+ rc = ata_slave_link_init(ap);
+ if (rc)
+ return rc;
+ }
+ }
+
+ return 0;
}
static void piix_iocfg_bit18_quirk(struct pci_dev *pdev)
@@ -1519,7 +1430,9 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
/* initialize controller */
if (port_flags & ATA_FLAG_SATA) {
piix_init_pcs(host, piix_map_db_table[ent->driver_data]);
- piix_init_sidpr(host);
+ rc = piix_init_sidpr(host);
+ if (rc)
+ return rc;
}
/* apply IOCFG bit18 quirk */
--
1.5.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
