-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Tejun, I've just compiled, and I'm now running the kernel with the patches applied. It seems to work, however I'm not sure why the SATA Link is 1.5gb/s ? Both my disks are SATA-II 300. Here's some system information related to the patch(es): ========== hdparm -Tt /dev/sd[bc]1 =========== /dev/sdb1: Timing cached reads: 2786 MB in 2.00 seconds = 1393.25 MB/sec Timing buffered disk reads: 232 MB in 3.01 seconds = 77.17 MB/sec /dev/sdc1: Timing cached reads: 2742 MB in 2.00 seconds = 1370.87 MB/sec Timing buffered disk reads: 208 MB in 3.02 seconds = 68.88 MB/sec ========== dmesg ========== [ 90.256606] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen [ 90.256615] ata1: irq_stat 0x00b40090 <PHY RDY changed> [ 90.256625] ata1: hard resetting link [ 92.449372] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 92.593106] ata1.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x9/0x9 [ 92.720891] ata1.00: hard resetting link [ 93.204061] ata1.00: softreset failed (SRST command error) [ 93.204068] ata1.00: reset failed (errno=-5), retrying in 10 secs [ 102.703482] ata1.00: hard resetting link [ 103.314425] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 103.330386] ata1.01: hard resetting link [ 103.893414] ata1.01: SATA link down (SStatus 0 SControl 300) [ 103.909388] ata1.02: hard resetting link [ 104.472403] ata1.02: SATA link down (SStatus 0 SControl 300) [ 104.488388] ata1.03: hard resetting link [ 105.051395] ata1.03: SATA link down (SStatus 0 SControl 300) [ 105.067367] ata1.04: hard resetting link [ 105.662330] ata1.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 105.662336] ata1.05: hard resetting link [ 106.225347] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 106.260017] ata1.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133 [ 106.260023] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 106.318220] ata1.00: configured for UDMA/100 [ 106.333611] ata1.04: ATA-7: WDC WD5000YS-01MPB1, 09.02E09, max UDMA/133 [ 106.333617] ata1.04: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 106.334621] ata1.04: configured for UDMA/100 [ 106.349138] ata1: EH complete [ 106.349170] PM: Adding info for No Bus:target0:0:0 [ 106.349323] scsi 0:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5 [ 106.349336] PM: Adding info for scsi:0:0:0:0 [ 106.350572] sd 0:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB) [ 106.350589] sd 0:0:0:0: [sdb] Write Protect is off [ 106.350591] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 106.350615] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 106.350666] sd 0:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB) [ 106.350678] sd 0:0:0:0: [sdb] Write Protect is off [ 106.350680] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 106.350702] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 106.350705] sdb: sdb1 [ 106.366234] sd 0:0:0:0: [sdb] Attached SCSI disk [ 106.366296] sd 0:0:0:0: Attached scsi generic sg2 type 0 [ 106.366329] PM: Adding info for No Bus:target0:0:4 [ 106.366807] scsi 0:0:4:0: Direct-Access ATA WDC WD5000YS-01M 09.0 PQ: 0 ANSI: 5 [ 106.366814] PM: Adding info for scsi:0:0:4:0 [ 106.367883] sd 0:0:4:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) [ 106.367896] sd 0:0:4:0: [sdc] Write Protect is off [ 106.367899] sd 0:0:4:0: [sdc] Mode Sense: 00 3a 00 00 [ 106.367922] sd 0:0:4:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 106.367963] sd 0:0:4:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) [ 106.367976] sd 0:0:4:0: [sdc] Write Protect is off [ 106.367978] sd 0:0:4:0: [sdc] Mode Sense: 00 3a 00 00 [ 106.368000] sd 0:0:4:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 106.368003] sdc: sdc1 [ 106.373944] sd 0:0:4:0: [sdc] Attached SCSI disk [ 106.373977] sd 0:0:4:0: Attached scsi generic sg3 type 0 [ 154.013280] kjournald starting. Commit interval 5 seconds [ 154.018158] EXT3 FS on sdb1, internal journal [ 154.018168] EXT3-fs: mounted filesystem with ordered data mode. [ 156.854093] kjournald starting. Commit interval 5 seconds [ 156.861351] EXT3 FS on sdc1, internal journal [ 156.861361] EXT3-fs: mounted filesystem with ordered data mode. ============================ Still my controller is not identified (PCI id?); dont know if thats something you want to change for the final patch: 01:00.0 Mass storage controller: Silicon Image, Inc. Unknown device 3531 (rev 01) - -Stefan Tejun Heo wrote: > Stefan Skotte wrote: >> drivers/scsi/ipr.c: In function __ipr_eh_dev_reset: >> drivers/scsi/ipr.c:3955: warning: passing argument 4 of ata_do_eh from >> incompatible pointer type >> drivers/scsi/ipr.c: In function ipr_ata_phy_reset: >> drivers/scsi/ipr.c:5049: error: struct ata_port has no member named >> device >> drivers/scsi/ipr.c:5053: error: struct ata_port has no member named >> device >> drivers/scsi/ipr.c:5056: error: struct ata_port has no member named >> device >> make[3]: *** [drivers/scsi/ipr.o] Error 1 >> make[2]: *** [drivers/scsi] Error 2 >> make[1]: *** [drivers] Error 2 >> make[1]: Leaving directory `/usr/src/linux-2.6.22-rc6' >> make: *** [debian/stamp-build-kernel] Error 2 > > Aiee, that's my bad. I forgot to convert ipr. > >> I just removed the ipr module since I'm not going to use it, but maybe >> I'm doing something wrong since I'm usng the debian build process (?), >> anyways I downloaded 2.6.22-rc6 from testing on kernel.org, so that >> should atleast be right. >> >> Thanks for getting back to me, I will report back how well my 3531-based >> controller fares... > > Thanks. > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGiMOv+vG8YFo3LPMRAkpOAKCjNCxGz4f+S20SOM8azZGnnMgufwCcCZXI py27dunJY0xf+Q8EU8hM7bc= =8cHz -----END PGP SIGNATURE----- - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
