Johny Mail list wrote:
2007/6/28, Mark Lord <liml@xxxxxx>:
I have an ugly (but working) hack for the ICH5 ata_piix driver
to support hot insertion/removal of drives, but I don't know if/when
I'll be pushing it upstream.
Yes it hang permanently there, after this messages i generally reboot
the server.
Yes it not support SATA drive hot insertion/removal, but i have make
the same test on windows. I unplug one disk when i'm logged and the
system don't stop. The drive is removed from the devices list.
If you can give me the patch for testing it... I would give you my
returns about the good/bad functioning in my case.
Okay, Here is a working patch for a very specific variant of ICH5.
If your PCI IDs don't match what the patch is looking for,
then it should have no effect -- you may need to patch the patch
to contain the correct PCI IDs (from lspci -n).
* * *
Implement ICH5 chipset handling for drive hot insertion/removal.
This cannot go upstream, as it conflicts with a more generic
polled-hotplug framework that is currently in development.
Hot-inserted drives are automatically detected within a second or two,
and are ready-to-use within 30 seconds or so. This could be even faster,
but the 2.6.18.8 libata implementation of error-handling is what slows
us down here.
Hot-removed drives are *not* noticed by the kernel until the next
time they are accessed. If you want this to happen quickly,
then just launch a script like this from /etc/inittab at boot time:
#!/bin/bash
( while ( /bin/true ) ; do /sbin/hdparm -C /dev/sd[a-z] ; sleep 5 ; done ) &>/dev/null &
This hack is not ready for mainline -- it's awaiting Tejun's hp-poll patches,
with which it will eventually be integrated.
Signed-off-by: Mark Lord <mlord@xxxxxxxxx>
---
diff -u --recursive --new-file --exclude-from=old/Documentation/dontdiff old/drivers/scsi/ata_piix.c linux/drivers/scsi/ata_piix.c
--- old/drivers/scsi/ata_piix.c 2007-04-20 14:08:46.000000000 -0400
+++ linux/drivers/scsi/ata_piix.c 2007-06-26 07:23:21.000000000 -0400
@@ -106,6 +106,8 @@
PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */
PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */
+ PIIX_HOTPLUG_POLL_TM = (2 * (HZ)), /* polling interval for hotplug */
+
/* combined mode. if set, PATA is channel 0.
* if clear, PATA is channel 1.
*/
@@ -150,6 +152,171 @@
const struct piix_map_db *map_db;
};
+struct piix_port_priv {
+ int pcs_hotplug_supported;
+ struct timer_list hotplug_timer;
+ u16 old_pcs;
+};
+
+static u32 ich_scr_read (struct ata_port *ap, unsigned int reg)
+{
+ u32 scr = 0;
+
+ if (reg == SCR_STATUS) {
+ struct piix_port_priv *pp = ap->private_data;
+ if (pp && pp->pcs_hotplug_supported) {
+ u16 pcs, port_bit = (1 << ap->hard_port_no);
+ struct pci_dev *pdev = to_pci_dev(ap->dev);
+
+ pci_read_config_word(pdev, ICH5_PCS, &pcs);
+ if (pcs & (port_bit << 4))
+ scr = 0x113;
+ }
+ }
+ return scr;
+}
+
+static int ich_port_offline (struct ata_port *ap)
+{
+ struct pci_dev *pdev;
+ u16 pcs, port_bit = (1 << ap->hard_port_no);
+ struct piix_port_priv *pp = ap->private_data;
+ u8 ostatus;
+ unsigned int offline;
+
+ if (!pp || !pp->pcs_hotplug_supported) {
+ u32 sstatus;
+ if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) != 0x3)
+ return 1;
+ return 0;
+ }
+
+ /*
+ * ICH5 with a mostly good/working PCS register.
+ * The only flaw is, it doesn't seem to detect *removed* drives
+ * unless we toggle the enable line before checking.
+ */
+ ostatus = ata_altstatus(ap);
+ pdev = to_pci_dev(ap->dev);
+ pci_read_config_word(pdev, ICH5_PCS, &pcs);
+ offline = ((pcs & (port_bit << 4)) == 0);
+
+ if (!offline) {
+ unsigned int usecs;
+
+ /* Cycle PCS register to force it to redetect devices: */
+ pci_write_config_word(pdev, ICH5_PCS, pcs & ~port_bit);
+ udelay(1);
+ pci_write_config_word(pdev, ICH5_PCS, 0x0003);
+
+ /* Wait for SATA PHY to sync up; typically 5->6 usecs */
+ for (usecs = 0; usecs < 100; ++usecs) {
+ pci_read_config_word(pdev, ICH5_PCS, &pcs);
+ offline = ((pcs & (port_bit << 4)) == 0);
+ if (!offline)
+ break;
+ udelay(1);
+ }
+ if (!offline) {
+ unsigned int msecs;
+ /* Wait for drive to become not-BUSY, typically 10->62 msecs */
+ for (msecs = 1; msecs < 150; msecs += 3) {
+ u8 status;
+ msleep(3);
+ status = ata_altstatus(ap);
+ if (status && !(status & ATA_BUSY))
+ break;
+ }
+ usecs += msecs * 1000;
+ }
+ printk("ata%u (port %u): status=%02x pcs=0x%04x offline=%u delay=%u usecs\n",
+ ap->id, ap->hard_port_no, ostatus, pcs, offline, usecs);
+ }
+ if (offline)
+ ata_port_disable(ap);
+ return offline;
+}
+
+static void pcs_hotplug_poll (unsigned long data)
+{
+ struct ata_port *ap = (void *)data;
+ struct pci_dev *pdev = to_pci_dev(ap->dev);
+ u16 old, new, port_bit = ((1 << ap->hard_port_no) << 4);
+ struct piix_port_priv *pp = ap->private_data;
+ int check_hotplug = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(ap->lock, flags);
+
+ if (!ap->qc_active) {
+ pci_read_config_word(pdev, ICH5_PCS, &new);
+ old = pp->old_pcs;
+ pp->old_pcs = new;
+
+ //printk("pcs_hotplug_poll(%d.%d) old=%04x new=%04x\n", ap->id, ap->hard_port_no, old, new);
+
+ if ((new & port_bit) != (old & port_bit)) {
+ check_hotplug = 1;
+ } else if (old & port_bit) {
+ //if (ap->hard_port_no == 1) //FIXME FIXME FIXME
+ // check_hotplug = 1;
+ }
+
+ if (check_hotplug) {
+ struct ata_eh_info *ehi = &ap->eh_info;
+
+ ata_port_printk(ap, KERN_INFO, "pcs_hotplug_poll: old=%04x new=%04x\n", old, new);
+ ata_ehi_clear_desc(ehi);
+ ata_ehi_hotplugged(ehi);
+ ata_ehi_push_desc(ehi, "hotplug event");
+ ata_port_freeze(ap);
+ }
+ }
+ if (pp->pcs_hotplug_supported)
+ mod_timer(&pp->hotplug_timer, jiffies + PIIX_HOTPLUG_POLL_TM);
+ spin_unlock_irqrestore(ap->lock, flags);
+}
+
+static int ich_port_start (struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->dev);
+ int rc;
+
+ rc = ata_port_start(ap);
+ if (rc == 0) {
+ if (pdev->vendor == 0x8086 && pdev->device == 0x24d1) {
+ struct piix_port_priv *pp;
+ pp = kzalloc(sizeof(*pp), GFP_KERNEL);
+ if (pp) {
+ pp->pcs_hotplug_supported = 1;
+ if (ap->private_data)
+ printk(KERN_ERR "port_start: huh? private_data=%p instead of NULL\n", ap->private_data);
+ ap->private_data = pp;
+ setup_timer(&pp->hotplug_timer, pcs_hotplug_poll, (unsigned long)ap);
+ pp->hotplug_timer.expires = jiffies + PIIX_HOTPLUG_POLL_TM;
+ add_timer(&pp->hotplug_timer);
+ } else {
+ printk(KERN_ERR "ich_port_start: failed to alloc %d bytes for port_priv\n", sizeof(*pp));
+ }
+ }
+ } else {
+ printk(KERN_ERR "ich_port_start: ata_port_start failed, rc=%d\n", rc);
+ }
+ return rc;
+}
+
+static void ich_port_stop (struct ata_port *ap)
+{
+ struct piix_port_priv *pp = ap->private_data;
+
+ if (pp) {
+ pp->pcs_hotplug_supported = 0;
+ del_timer_sync(&pp->hotplug_timer);
+ ap->private_data = NULL;
+ kfree(pp);
+ }
+}
+
static int piix_init_one (struct pci_dev *pdev,
const struct pci_device_id *ent);
static void piix_host_stop(struct ata_host_set *host_set);
@@ -289,8 +456,11 @@
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
- .port_start = ata_port_start,
- .port_stop = ata_port_stop,
+ .scr_read = ich_scr_read,
+
+ .port_offline = ich_port_offline,
+ .port_start = ich_port_start,
+ .port_stop = ich_port_stop,
.host_stop = piix_host_stop,
};
diff -u --recursive --new-file --exclude-from=old/Documentation/dontdiff old/drivers/scsi/libata-core.c linux/drivers/scsi/libata-core.c
--- old/drivers/scsi/libata-core.c 2007-04-20 14:08:45.000000000 -0400
+++ linux/drivers/scsi/libata-core.c 2007-06-26 07:22:19.000000000 -0400
@@ -4914,7 +4914,7 @@
*/
int sata_scr_write(struct ata_port *ap, int reg, u32 val)
{
- if (sata_scr_valid(ap)) {
+ if (sata_scr_valid(ap) && ap->ops->scr_write) {
ap->ops->scr_write(ap, reg, val);
return 0;
}
@@ -4987,6 +4987,8 @@
{
u32 sstatus;
+ if (ap->ops->port_offline)
+ return ap->ops->port_offline(ap);
if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) != 0x3)
return 1;
return 0;
diff -u --recursive --new-file --exclude-from=old/Documentation/dontdiff old/include/linux/libata.h linux/include/linux/libata.h
--- old/include/linux/libata.h 2007-06-26 07:22:26.000000000 -0400
+++ linux/include/linux/libata.h 2007-06-26 07:22:19.000000000 -0400
@@ -614,6 +614,7 @@
int (*port_start) (struct ata_port *ap);
void (*port_stop) (struct ata_port *ap);
+ int (*port_offline) (struct ata_port *ap);
void (*host_stop) (struct ata_host_set *host_set);
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
