thomas schorpp wrote:
thomas schorpp wrote:
------------------------------------------------------------------------
Subject:
promise-sata-pata, No release code PATA port on Promise PDC20579, TODO?
From:
thomas schorpp <t.schorpp@xxxxxx>
Date:
Fri, 10 Nov 2006 14:41:53 +0100
To:
Linux SCSI list <linux-scsi@xxxxxxxxxxxxxxx>
To:
Linux SCSI list <linux-scsi@xxxxxxxxxxxxxxx>
hi,
got a msi neo-2 fir now, cause nforce4 is incompatible with scsi+2xdvb
on its pci.
like to use the PATA port of PDC20579 SATA II 150.
pls list TODOs and outstanding issues blocking the release.
some testcases for me?
y
tom
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
no support at all for this chip's PATA in libata-dev.git:
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 21
ata1: SATA max UDMA/133 cmd 0xE0EE4200 ctl 0xE0EE4238 bmdma 0x0 irq 21
ata2: SATA max UDMA/133 cmd 0xE0EE4280 ctl 0xE0EE42B8 bmdma 0x0 irq 21
scsi1 : sata_promise
ata1: SATA link down (SStatus 0 SControl 300)
scsi2 : sata_promise
ata2: SATA link down (SStatus 0 SControl 300)
sata_promise: loaded successfully
ohci1394: already loaded
ata_generic: loaded successfully
pata_via: loaded successfully
but it is mentioned in source, some hints to enable it, pls.
thx,
y
tom
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
thx for releasing (missed it), it's working, done great:
libata version 2.20 loaded.
sata_promise 0000:00:0d.0: version 2.00
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 17
sata_promise PATA port found
ata1: SATA max UDMA/133 cmd 0xffffc20000022200 ctl 0xffffc20000022238
bmdma 0x0000000000000000 irq 17
ata2: SATA max UDMA/133 cmd 0xffffc20000022280 ctl 0xffffc200000222b8
bmdma 0x0000000000000000 irq 17
ata3: PATA max UDMA/133 cmd 0xffffc20000022300 ctl 0xffffc20000022338
bmdma 0x0000000000000000 irq 17
scsi1 : sata_promise
ata1: SATA link down (SStatus 0 SControl 300)
scsi2 : sata_promise
ata2: SATA link down (SStatus 0 SControl 300)
scsi3 : sata_promise
ata3.00: ATA-6: ST3120026A, 8.01, max UDMA/100
ata3.00: 234441648 sectors, multi 0: LBA48
ata3.00: configured for UDMA/100
scsi 3:0:0:0: Direct-Access ATA ST3120026A 8.01 PQ: 0 ANSI: 5
SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdb: sdb1 sdb2
sd 3:0:0:0: Attached scsi disk sdb
sd 3:0:0:0: Attached scsi generic sg1 type 0
smartmontools and hddtemp are working, too.
i'll report if any issues or regression.
y
tom
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
